HAMPTON BAY GFM00469A User manual

THANK YOU
We appreciate the trust and confidence you have p laced in Hampton Bay through the purchase of this gazebo. We strive to continually create.
.sdeentnemevorpmiemohruoyrofelbaliavastcudorpfoenilllufruoeesotenilnosutisiV.emohruoyecnahneotdengisedstcudorpytilauq
Thank you for choosing Hampton Bay!
Item #
Model # GFM00469A
USE AND CARE GUIDE
ARCHED GAZEBO
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.CA
1000 847 084

2
Table of Contents
Table of Contents..........................................................2
Warranty ........................................................................2
What is Covered ...................................................................... 2
What is Not Covered ................................................................ 2
Pre-Assembly ................................................................3
Planning Assembly .................................................................. 3
Hardware Included .................................................................. 3
Warranty
1 YEAR FRAME AND 1 YEAR FABRIC LIMITED WARRANTY
WHAT IS COVERED
We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for one year.
WHAT IS NOT COVERED
Contact the Customer Service Team at 1-877-527-0313 or visit www.Homedepot.ca.
Safety Information
PRODUCT CAUTION
This gazebo was made for the explicit purpose of providing outdoor functions and is not to be used as a toy. This product is intended for
normal outdoor use; however, the manufacturer recommends storing and / or covering this gazebo when any formidable / severe weather is
he product.
Children under the age of 10 near this product, should be supervised by a competent adult at all times. This product is NOT intended for
commercial use and will void the warranty.
SAFETY WARNINGS
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty. We
reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Ass ..........ylbme ............................................................. 5
Package Cont s
tne .................................................................... 4
Safety Information .......................................................2
Product Caution .................................................................... 2
WARNING: Please keep children out of the assembly area
before assembly. CAUTION: Do not locate the product near any heat source.
CAUTION: When not in use, secure the product in a
!
!
Safety Warnings ..................................................................... 2
Care and Cleaning............................ .... .. ......................
14
cool and covered location.
WARNING: This gazebo unit is heavy, and may require two
adults for safe assembly.

3
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: Need three to four persons to assemble this
product.
Part Description Quantity
AA M6x15 bolt
BB M6x18 countersunk bolt 8+1
49+1
HARDWARE INCLUDED
HOMEDEPOT.CA
CC M6x35 bolt 1+4
DD
M6x80 bolt 1+62
NOTE: Hardware not shown to actual size.
EE
Washer 1+97
AA BB CC DD EE
FF GG
FF
Ground spike 1+61
GG
Hex wrench 2
Please contact 1-877-527-0313 for further assistance.

4
Pre-Assembly (continued)
PACKAGE CONTENTS
Part Description Quantity
A Right connector bar 2
B Left connector bar 2
Lengthways bar 4
Side top bar 2
Center lengthways bar 1
Part Description Quantity
I Protective cover 1
J Fabric shade 1
K Magnet iron plate 1
L End tip 4
C
D
E
E1 Center fabric hanger 4
Short shade rod 2
Long shade rod 4
Post 4
F
G
H
L1
Sidefabric hanger 8
Q
Center tip 2
R
Post base plate 4
S
Inner tip 8
H
A
B
A
B
C
E
F
G
I
J
K
L
SQ
R
F
H
A
B
A
B
C
E
F
G
J
K
L
SQ
R
F
H
A
B
A
B
C
E
F
G
I
J
K
L
SQ
R
F
H
A
B
A
B
C
D
E
F
G
J
K
L
SQ
R
F
E1
L1
L1

1
l
5
Assembly
Insert the left connector bar (B) into the right connector bar (A) first, then secure the connector bars (A & B) with
M6x15 bolts (AA) and washers (EE).
Connecting the connector bar with the magnet iron plate
HOMEDEPOT.CA
Please contact 1-877-527-0313 for further assistance.
NOTE: Fully tighten all bolts using the hex wrench (GG).
A
B
B
AAB
K
K
AA
EE
EE AA AA
EE
AB
Attach the magnet iron plate (K) to the assembled connector bars (A & B) using M6x15 bolts (AA) and washers(EE).

2
l
6
Assembly (continued)
Connecting the connector bar
NOTE: Fully tighten all bolts using the hex wrench (GG).
A
B
B
A
AA
AA
EE
EE
A
B
Insert the left connector bar (B) into the right connector bar (A), then secure the connector bars (A & B) with
M6x15 bolts (AA) and washers (EE).

3
l
7
Assembly (continued)
Insert the tip
Take out the foam blocks in the side top bar (D). Insert the end tips (L) into the side top bar (D). Repeat this step for another
Take out the foam blocks in the center lengthways bar (E), and insert the center tips (Q).
Insert the inner tip (S) into the lengthways bar (C). Repeat this step for another three lengthways bars (C).
HOMEDEPOT.CA
Please contact 1-877-527-0313 for further assistance.
D
C
C
E
S
S
S
Q
L
E
D
foam block
bloc de mousse
L
D
E
Q
Q
foam block
bloc de mousse
side top bar (D).
L
3-1
3-2
3-3

4
l
8
Assembly (continued)
Attaching the crossbar
Attach the center lengthways bar (E) with the hole side to the center of the connector bars (A & B) without the magnet iron plate,
using M6x80 bolts (DD) and washers (EE).
Attach the lengthways bar (C) to the assembled connector bars (A & B) using M6x80 bolts (DD), M6X15 bolts (AA) and washers (EE).
Repeat this step for another three
lengthways bars (C) and two side top bars (D).
Once all bolts are in place, fully tighten all the bolts by the hex wrench (GG).
DD
EE
Q
A
E
B
EE
DD
AA
S
EE
A&B
C
B
B
A
A
C
C
E
D
D
Q
B
A
E
K
DD
AA
EE
EE
D
A&B
L
AA
DD
EE
EE
The hole is to lock the
protective cover (I)
Le trou sert à verrouiller
la couverture de protection (I)
Attach another side of the center lengthways bar (E) to the center of the back connector bars (A & B) using M6x80 bolts (DD),
M6X15 bolts (AA) and washers (EE).
Make sure three red circled holes on top bars (D) and center lengthways bar (E) must stay
on the same side to allow assembling the protective cover (I) later on, then attach to the
assembled connector bar (A&B) which is without Magnet iron plate (K) as shown below.
.

5
l
9
Attach the post base plates (R) to the posts (H) using M6x15 bolts (AA) and washers (EE).
Attaching the post base plates to the posts
Assembly (continued)
NOTE: Loosely tighten all bolts using the hex wrench (GG).
H
R
HR
AA
EE
HOMEDEPOT.CA
Please contact 1-877-527-0313 for further assistance.
Repeat this step for another three posts (H).

6-1
l
10
Assembly (continued)
Attaching the posts to the assembled structure
Attach the posts (H) to the assembled structure using M6x15 bolts (AA), M6x80 bolts (DD) and washers (EE).
NOTE: Suggest two ladders to assemble the posts.
H
H
D
D
D
L
B
A
DD
EE
EE
AA
A&B