HAMPTON BAY LORSTON GFM30005B User manual

USE AND CARE GUIDE
LORSTON 12 X 12 FT GAZEBO
Item # 1006 615 785
Model # GFM30005B
THANK YOU
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improv
lly create
ement needs.
Thank you for choosing Hampton Bay!
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM

Table of Contents.....................................2
Important Safety Instructions...........................2
Warranty ...........................................3
Pre-Assembly.........................................
Assembly. . . . . . .......................................
Planning Assembly ...................................
Save These Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Read All Instructions Before Use . . . . . . . . . . . . . . . . . . . . . 2
What is covered ....................................3
What is not covered .................................3
Care and Cleaning .....................................
Table of Contents
Important Safety Instructions
Package Contents . ...................................
SAVE THESE INSTRUCTIONS
WARNING: THIS GAZEBO WAS MADE FOR THE EXPLICIT PURPOSE OF PROVIDING OUTDOOR FUNCTIONS AND IS NOT TO BE USED AS A TOY.
THIS PRODUCT IS INTENDED FOR NORMAL OUTDOOR USE; HOWEVER, THE MANUFACTURER RECOMMENDS STORING AND/OR COVERING THIS
PRODUCT WHEN ANY FORMIDABLE/SEVERE WEATHER IS APPROACHING.
WARNING: DO NOT LOCATE THIS PRODUCT NEAR OPEN FLAMES. DO NOT USE THIS PRODUCT AS A SUPPORT. DO NOT SHAKE, LEAN OR CLIMB
ON THE PRODUCT. CHILDREN UNDER THE AGE OF 10, NEAR THE PRODUCT, SHOULD BE SUPERVISED BY A COMPETENT ADULT AT ALL TIMES.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE AND WILL VOID THE WARRANTY.
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1. Close supervision is necessary when this furnishing is used by
or near children, or disabled persons, if applicable.
2. Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.
3. Do not move the gazebo while it in use. Failure
to obey this caution could result in injury.
3
5
28
3
WARNING: Never use this product as a support. Do not
shake, lean, or climb on the product at any time.
WARNING: Please keep children out of the assembly
area before assembly.
CAUTION: When not in use, secure the product in a
cool and covered location.
CAUTION: Do not locate the product near any heat
sources or open flame.
CAUTION: This gazebo is made for the explicit purpose of
providing limited outdoor sunshade and is not to be used
as a toy, shelter, or tent.
CAUTION: Children under the age of 10 who are near
the gazebo should be supervised by a competent
adult at all times.
Hardware Included. . ..................................3
4
2
WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY
FROM THIS GAZEBO FABRIC.
WARNING: The application of any foreign substance to the
gazebo fabric may render the flame resistent properties
ineffective.
WARNING: This gazebo is made with fabric that meets
CPAI - 84 specifications for flame resistence. It is not fire
proof. The fabric will burn if left in continuous contact with
any flame source.
WARNING: This gazebo unit is heavy, and may
require two adults for safe assembly.
WARNING: Do not place heavy objects on the gazebo.

Warranty
2 YEAR FRAME AND 2 YEAR FABRIC WARRANTY
WHAT IS COVERED
We warrant the frames to be free of manufacturing defects to the original purchaser for two years, and a two year warranty for the fabric.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to assemble this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
M6x15 Combination Bolt
M6x30 Combination Bolt
136+1
26+1
AA
BB
M6x40 Combination Bolt 20+1 CC
M6x75 Combination Bolt 8+1
DD
Dia.7x41 Stud 12+1
EE
Part Description Quantity
AA BB CC DD EE
FF HH II JJGG
KK MM NN OO LL
Dia.7x29 Stud 8+1
FF
M6 Nut 28+1
GG
Dia.14 Plastic Washer 2+1
HH
Dia.25 Plastic Washer 8+1
II
JJ
Dia.16 Plastic Washer 12+1
KK
Nut Cover 20+1
LL
Ground Spike 8+1
MM
Wrench 1
NN
Hex Wrench 2
OO
M6x40 Bolt 16+1
3
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HOMEDEPOT.COM.

Border Tube Outer Metal Part 4
N1
Top Frame Plug 4 O
Top Frame Tube 4 O1
Metal Plate 2 4
P
Metal Plate 3 4 P1
Metal Plate 4 4
Q
Metal Plate 5 4
Q1
Metal Plate 6 4
R
Metal Plate 7 4
R1
Metal Plate 8 4 S
Cover Plate 1 4
T
Cover Plate 2 4
T1
Top Corner Incline Tube 4
U
Top Border Tube 4
V
Metal Plate 1 4
W
Top Cover Plate 4
X
Bottom Plate 1
Y
Hook 1
Y1
Top Plate 1
Z
Pre-Assembly (continued)
PACKAGE CONTENTS
Part Description Quantity
Border Tube 2
Incline Outer Metal Part
4
8
M1
N
Part Description Quantity
Post
Post Base Plate
4
4
A
Post Base Cap 4
B
Long Beam 1
4
Long Beam 2
4
C
Beam Lining 4
C1
Beam Decorator
D
Support Bar 8
D1
Fabric Rod 8
E
Fabric Rod Cap 16
F
Split Ring 48+1
G
Netting 4
H
Corner Fitting 4
J
Middle Fitting 4
K
Corner Incline Tube 4
K1
Middle Incline Combination Set 4
L
Border Tube 1 4
L1
M
B1
4
4

Assembly
1Attaching the Post Base Cap and the Post Base Plate to the Post
Attach the post base cap (B1) and the post base plate (B) to the posts (A) using M6x15 Combination Bolts (AA).
Repeat this step for the other three posts (A).
Fully tighten the bolts using the hex wrench (OO).
5
A
X4
AA
B
B1
A
B
B1
A
STEP 1
STEP 2
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM

Assembly (continued)
2Attaching the Long Beam 1 and Long Beam 2 to the Beam Lining and the Beam
Decorator
Attach the long beam 1 (C) and long beam 2 (C1) to the beam lining (D1).
Attach the long beam 1 (C) and long beam 2 (C1) to the beam decorator (D) using M6x75 Combination Bolts (EE) and M6 nuts (HH).
Do not fully tighten all the bolts at this step.
6
D1
D1
C
C
X4
C
C1
X4
C1
EE
D
HH
C
D
HH
EE
C
STEP 2
STEP 1
Repeat this step for the other three long beams.

Assembly (continued)
3Attaching the Assembled Long Beam to the Post
Attach the assembled long beam (C&C1) to the two posts (A) using M6X40 combination bolts (CC).
Repeat this step for the other two posts (A).
Fully tighten all the bolts at this step.
7
A
A
A
A
C
C
C1
C1
CC
X2
CC
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM

Assembly (continued)
4Connecting the Assembled Long Beam to the Assembled Post
Attach the assembled long beam (C&C1) to the assembled posts (A) using M6X40 combination bolts (CC) as shown below.
Fully tighten all the bolts at this step.
8
A
A
AA
A
C
CC
C
C1
C
C1
CC1 C
C1
CC

Assembly (continued)
5Attaching the Support Bar to the Beam and the Post
Attach the support bars (E) to the posts (A) using M6x15 combination bolts (AA).
Attach the support bars (E) to the long beam1 (C) and long beam2 (C1) using M6x15 combination bolts (AA).
Fully tighten all the bolts at this step.
9
E
AA
E
A
E
C&C1
AA
STEP 2
STEP 1
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM

Assembly (continued)
6Attaching the Corner Fitting to the Corner Incline Tube, Attaching the Middle
Fitting to the Middle Incline Combination Set, Fixing the Stud to the Corner
Incline Tube and the Middle Incline Combination Set
10
Attach the corner tting (K) to the corner incline tube (L) using M6x15 combination bolt (AA).
Fix the dia.7x41 stud (FF) to the corner incline tube (L).
Fix the dia.7x29 stud (GG) to the middle incline combination set (L1).
Repeat this step for other three corner incline tubes (L) and the other three middle incline combination sets (L1).
Fully tighten all the bolts at this step.
K
AA
K
L
L
FF
L
X4
L1
K1
L1
X4
GG
L1
AA
K1

Assembly (continued)
7Attaching the Corner Incline Tube to the Post and the Top Frame Tube
Insert the top frame plug (O) to the corner incline tube (L) and the top frame tube (O1) as shown below.
Fully tighten all the bolts at this step.
11
O
L
O1
O
O1
L
K
L
O
O
O1
O
O1
L
L
K
K
L
A
K
AA
K
O1
O1
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM

Assembly (continued)
8Attaching the Middle Incline Combination Set to the Top Frame Tube and the Beam
Insert the middle incline combination set (L1) into the top frame tube (O1) as shown .
Attach the middle incline combination set (L1) to the corner incline tube (L) using the M6x15 Combination bolt (AA).
Attach the middle incline combination set (L1) to the beam decorator (D) using the M6 nuts (HH) and M6x75 Combination Bolts
Fully tighten all the bolts at this step.
12
NOTE:
L1
L
L
DD
K1
HH
HH L1
L1
STEP 4
STEP 3
STEP 2
STEP 1
O1
AA LL1
L
L1
L1
L
L1
L1

Assembly (continued)
9Inserting the Top Corner Incline Tube to the Bottom Plate, Attaching the Top
Corner Incline Tube and the Top Border Tube to the Incline Outer Metal Part
Insert the top corner incline tube (U) to the bottom plate (Y).
Attach the top corner incline tube (U) and the top border tube (V) to the incline outer metal part (N) using the M6x15 combination
bolt (AA) as shown below.
Fully tighten all the bolts at this step.
13
V
Y
U
N
V
N
V
N
V
V
U
Y
U
U
V
AA
N
V
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM

Assembly (continued)
10 Attaching the Metal Plate 1 to the Top Border Tube
Attach the metal plate 1 (W) to the top border tube (V) using the M6x15 combination bolts (AA).
Fully tighten all the bolts at this step.
14
AA
V
WUP
W
W
W
W

Assembly (continued)
11 Attaching the Top Cover Plate and the Top Plate to the Metal Plate 1, Attaching
the Top Plate and the Hook to the Bottom Plate
Attach the top cover plate (X) to the metal plate 1 (W) using the M6x40 combination bolts (CC).
Attach the top plate (Z) to the bottom plate (Y) using the M6x30 combination bolt (BB) and plastic washer (II).
Screw the hook (Y1) to the bottom plate (Y).
Fully tighten all the bolts at this step.
15
CC
W
X
W
Y
II
BB
Z
X
X
X
XZY1
STEP 2
STEP 3
STEP 1
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM

Assembly (continued)
12 Attaching the Top Corner Incline Tube to the Top Frame Plug
Attach the top corner incline tube (U) to the top frame plug (O) using the M6x15 combination bolts (AA).
Fully tighten all the bolts at this step.
16
AA
U
O

Assembly (continued)
13 Attaching the Border Tube to the Incline Tube
Attach the border tube 1 (M) and border tube 2 (M1) to the corner incline tube (L) using the M6x15 combination bolts (AA).
Attach the border tube 1 (M) and border tube 2 (M1) to the middle incline combination set (L1) using the M6x15 combination bolts (AA).
Fully tighten all the bolts at this step.
17
MM1
L
M
M1
MAA
M1
M
M1
M
M1
M
AA
L1
AA
M1
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM

Assembly (continued)
14 Attaching the Metal Plate
Attach the metal plate 8 (S) to the middle incline combination set (L1) using Dia.25 Plastic washer (JJ), M6 nut (HH) and nut
cover (LL).
Fully tighten all the bolts at this step.
18
S
HH
LL JJ
L1
L1
S
S
S
S
GG

Assembly (continued)
15 Attaching the Metal Plate
Attach the metal plate 7 (R1) and metal plate 6 (R) to the corner incline tube (L) using the M6x15 combination bolts (AA).
Attach the metal plate 6 (R) and metal plate 8 (S) to the border tube 2 (M1) using the M6x30 combination bolts (BB).
Attach the metal plate 7 (R1) and metal plate 8 (S) to the border tube 1 (M) using the M6x30 combination bolts (BB).
Attach the metal plate 7 (R1) and metal plate 6 (R) to the border tubes (M&M1) using the M6x15 combination bolts (AA).
Fully tighten all the bolts at this step.
19
R
S
S
S
R1
AA
R&R1
M&M1
R
R1
BB
M
S
R1
S
S
M1
R
BB
R
R1
R1
AA
R
R
S
R
L
R1
S
R1
UP
UP
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM

Assembly (continued)
16 Attaching the Metal Plate
Attach the cover plate (T) to the assembled frame using the Dia.16 Plastic washer (KK), M6 nut (HH) and nut cover (LL).
Fully tighten all the bolts at this step.
20
STEP 1 STEP 2
T
KK
HH
LL
T
T
T
T
T