HAMPTON BAY GG-11110-AAA User manual

USE AND CARE GUIDE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
HAMPTONBAY.COM
THANK YOU
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Hampton Bay!
Item #
Model #
TUURTLE ISLE PERGOLA
1-855-HD-HAMPTON
pergola

2
Table of Contents
Table of Contents ...................................2
Warranty
........................................ . .2
What is covered ...................................2
What is not covered ................................2
2.
SAVE THESE INSTRUCTIONS
Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.
Close supervision is necessary when this furnishing is used by or
near children, or disabled persons, if applicable.
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1.
Pre-Assembly.
.................................. ..3
Planning Assembly
............................. ..3
Hardware I n c l uded ................................3
Package Contents .................................4
Assembly
...................................... ..
Care and Clea.ning ..................................
5


15
Warranty
THIS IS A RESIDENTIAL WARRANTY ONLY AND THIS WARRANTY DOES NOT APPLY TO COMMERCIAL
USE
YEAR FRAME LIMITED WARRANTY
WHAT IS COVERED
WHAT IS NOT COVERED
It remains the customer's responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, re, freezing, and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
We warrant the frame to be free of manufacturing defects to the original purchaser for three years.
3
Safety Information
Safety Information .2
.................................
at 1-855-HD-HAMPTON or visit www.hamptonbay.com
For a copy of our full limited warranty, please contact our customer service team

3
Pre-Assembly
NOTE: More than one person may be required to
complete the assembly of this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
PLANNING ASSEMBLY
Please read this entire instruction manual prior to assembly.
Verify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a non-abrasive surface to
avoid scratching.
_
AA
_
BB
_
CC
_
DD
_
EE
_
FF
HAMPTONBAY.COM
NOTE: Tools and protective articles below
are not provided.
TOOLS REQUIRED
To prevent damage, place all parts on a soft surface duing assembly.
Tools required for assembly (not included): Allen wrench (included) , hammer, screwdriver, step ladder, level and other safety items such
as gloves, safety goggles and hard hat.
Hammer Screwdriver Hard hat Safety goggles Gloves Step ladder Level
M6 x 35 mm
Part Description Quantity
AA M6 x 20 mm
BB
CC
DD
M6 x 45 mm
EE
F F
bolt
bolt
bolt
M6 Allen wrench
M6 nut
Stake
1 7 9
24
24
14
24
2
Please contact 1-855-HD-HAMPTON for further assistance.
1
G G M6 Hex wrench
_
GG

Pre-Assembly
4
PACKAGE CONTENTS
(continued)
AB
DE F
C
Part Description Quantity
C Post C
1
E
1
A Post A
1
1
F
1
G
1
1
1
12
H
I
Back left straight beam
56
2
3
8
8
Front right straight beam
M
D
Back right straight beam
Post D
Front left straight beam
Part Description Quantity
4
4
3
7
N
P
Q
O
B Post B
R
L-shape connector
L
Support bar
Leg base plate
Beam connector 12
I
J
K
R
M
NOP
Q
J
Middle post
2
K
Decorative tube 1
Decorative tube 2
6
L
V
U
T
S
G
H
S
T
U
VPlastic connector 128
Side straight beam 1
Decorative part
Connector tube
Top middle front beam
Top middle back beam
Side straight beam 2

Assembly
Attaching the back left straight beam and side straight beam to the post
1
Attach the back left straight beam (F) and side straight beam 2 (L) to the post B using the M6 x 20 mm bolts (AA) with M6 Allen
Attaching the leg base plates to the posts
2
Attach the leg base plates (T) to the posts (A, B, C, D) and middle post (M) using the M6 x 20 mm
□bolts (AA) with M6 Allen wrench (FF).
Fully tighten all the bolts.
5HAMPTONBAY.COM
□
□
□Attach support bar (P) to the post (B) and side straight beam 2 (L) using the M6 x 20 mm bolts (AA) with M6 Allen wrench (FF).
NOTE:
correctly. Fully tighten the bolts.
Please ensure all bolts are aligned and assembled
AA
AA
AB
CD
F
L
P
Please contact 1-855-HD-HAMPTON for further assistance.
AA
T
M
T
T
AA
B
wrench (FF).
AA
AA
AA

(continued)
Assembly
6
Attaching the back right staight beam and side straight beam to the post
Attach the back right straight beam (E) and side straight beam 1 (K) to the post (A) using the M6 x 20 mm bolts (AA) with M6 Allen wrench (FF).
3
□
□Attach support bar (P) to the post (A) and side straight beam 1 (K) using the M6 x 20 mm bolts (AA) with M6 Allen wrench (FF).
Attaching the side straight beam and front left straight beam to the post
Attach the side straight beam 1 (K) and front left straight beam (H) to the post (C) using the M6 x 20 mm bolts (AA) with M6 Allen
4
□
□Attach support bar (P) to the post (C) and side straight beam 1 (K) using the M6 x 20 mm bolts (AA) with M6 Allen wrench (FF).
□Attach support bar (P) to the post (C) and front left straight beam (H) using the M6 x 20 mm bolts (AA) with M6 Allen wrench (FF).
NOTE:
correctly. Fully tighten the bolts.
Please ensure all bolts are aligned and assembled
NOTE:
correctly. Fully tighten the bolts.
Please ensure all bolts are aligned and assembled
A
P
H
C
P
AA
K
E
AA
K
wrench (FF).
AA
AA
AA
AA
AA
AA
AA
AA

5
(continued)
Assembly
6
Attaching the back straight beam using the beam connector
□
7
Attach the back left straight beam (F) to the back right straight beam (E) with the beam connector (U) using the M6 x 20 mm bolts (AA)
Attaching the side straight beam and front right straight beam to the post
Attach the side straight beam 2 (L) and front right straight beam (G) to the post (D) using the M6 x 20 mm bolts (AA) with M6 Allen
□
□Attach support bar (P) to the post (D) and side straight beam 2 (L) using the M6 x 20 mm bolts (AA) with M6 Allen wrench (FF).
□Attach support bar (P) to the post (D) and front right straight beam (G) using the M6 x 20 mm bolts (AA) with M6 Allen wrench (FF).
NOTE:
correctly. Fully tighten the bolts.
Please ensure all bolts are aligned and assembled
AA
G
P
D
L
B
A
L
FU
NOTE:
correctly. Fully tighten the bolts.
Please ensure all bolts are aligned and assembled
AA
E
P
P
K
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
wrench (FF).
with M6 Allen wrench (FF).
AA
AA
AA
AA
AA
AA

8
7
(continued)
Assembly
8
Attaching the side straight beams using the beam connector
□Attach the front right straight beam (G) to the front left straight beam (H) with the beam connector (U) using the M6 x 20 mm bolts (AA)
Attaching the front straight beam using the beam connector
AA
AA
UH
G
L
P
PK
C
D
D
C
P
P
P
P
G
H
E
F
P
B
A
U
K
L
K
AA
AA
□Attach the side straight beam 1 (K) to the side straight beam 2 (L) with the beam connector (U) using the M6 x 20 mm bolts (AA)
NOTE:
correctly. Fully tighten the bolts.
Please ensure all bolts are aligned and assembled
LU
with M6 Allen wrench (FF).
with M6 Allen wrench (FF).
Fully tighten all the bolts.
□

Assembly
9
(continued)
9
10
Attaching the connector tube
□
Fully tighten all the bolts.
□
Attaching the decorative parts
Attach the decorative parts (R) to the side straight beams ( K, L) with the M6 x 20 mm bolts (AA) using M6 Allen wrench (FF).
□
Fully tighten all the bolts.
□
Attach the connector tube (Q) to the top of posts (A, B, C and D) with the M6 x 45 mm bolts (CC) using M6 Allen wrench (FF).
Q
CC
AA
R
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Q
Q
R
R
R
R
K
L
K
L

Assembly (continued)
11
12
10
Attaching the top middle beam
□
Attaching the middle post
□Attach three middle posts (M) to the back straight beams (E and F) with L-shape connector (S) using the M6 x 20 mm bolts (AA)
Attach the top middle front beams (N) to the top middle back beams (O) with the beam connectors (U) using the M6 x 20 mm bolts (AA).
NO
U
AA
AA
AA S
M
MM
Fully tighten all the bolts.
□
Fully tighten all the bolts.
□
L
KK
L
F
E
with M6 Allen wrench (FF).