HAMPTON BAY CAMBRIDGE 517148B User manual

USE AND CARE GUIDE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item #
Model #
We appreciate the trust and confdence you have placed in Hampton Bay through the purchase of this Swivel rocker. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Hampton Bay!
THANK YOU
CAMBRIDGE PATIO SWIVEL ROCKER WITH CUSHION

2
Table of Contents
Table of Contents ................................... 2
Safety Information .................................. 2
What is covered................................... 3
What is not covered................................ 3
Warranty .......................................... 3
Pre-Assembly ..................................... 3
Hardware Included....................................... 3
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5,6
Cleaning and Maintance . . . .
Service Parts .................................... . . . . 8
..............................7
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Important Safety Instructions
READ ALL INSTRUCTIONS BEFORE USE
1. Close supervision is necessary when this furnishing is used by or near children, or disabled persons, if applicable.
2. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by
the manufacturer.
SET UP YOUR FURNITURE PROPERLY
1. Ensure that all parts are assembled properly and fully tightened as per the instructions.
2. When placing in the desired location, ensure that all legs are resting on the same surface.
EXAMINE YOUR FURNITURE
Examine occasionally to ensure that there are no loose parts. If loose parts are found, they must be re-tightened fully
before additional use.
OBSERVE WEIGHT LIMITS
The weight limits for the following products are listed below:
□Chair: 300 lbs
□Swivel Chair: 300 lbs
□Loveseat: 500 lbs
□Ottoman: 150 lbs
□Table: 50 lbs
□Sofa: 700 lbs
□Rocking Chair: 300 lbs
□Chaise Lounge: 300 lbs
□Dining Table: 100 lbs
□Dining Chair: 200 lbs
CAUTION: If you overload your furniture, injuries can
occur.
To reduce the risk of injury to persons:

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Warranty
Pre-Assembly
PLANNING ASSEMBLY
To prevent damage, place all parts on a soft surface during assembly. Remove all protective caps before beginning assembly.
HARDWARE INCLUDED
THREE YEAR FRAME, WEAVE AND FABRIC LIMITED WARRANTY
WHAT IS COVERED
We warrant the frame, weave and fabric to be free of manufacturing defects to the original purchaser for three years. For glass table
top we warrant 30 days from the date of purchase.
WHAT IS NOT COVERED
This warranty does not cover commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts
are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.Hamptonbay.com.
Part Description Quantity
8
BB Washer
(6mm) 10
CC Cap for bolt
(6mm ) 10
DD
Hex wrench (4mm) 1
AA BB CC DD
EE
2
Bolt (1/4x20mm)
Bolt
(1/4x35mm )
EE
FF
Hex wrench (5mm) 1
FF
AA

PACKAGE CONTENTS
4 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly
F
E
D
B
C
A
G
Part Description Quantity
A Seat 1
B Back 1
C Left Arm 1
D 1
E 1
F 1
Right Arm
Seat Cushion
Back Cushion
G Base 1

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly
A
BB
B
DD
CC
CC
CC
□
□
Place the chair right side up.
Fully tighten all the bolts (AA) with the Hex wrench (EE) and
cover with the bolt caps (CC).
1
□
Attach the back (B) to the seat (A) by aligning two holes
on the back (B) with the two holes on the seat (A). Insert
bolts(DD) with washers (BB) .
Tighten half way using the Hex wrench (EE) . Do not
tighten completely.
□
□
□
3
□
□
4
A
D
B
C
Attaching the back Attaching the left arm
Attaching the right arm Attaching the caps
Attach the left arm (C) to seat (A), fasten with bolts (AA) and
washers (BB). Tighten half way using the Hex wrench(EE).
Do not tighten completely. ( Fig 1)
Attach the back (B) to the left arm (C) by aligning the hole on
the back (B) with the hole on the left arm (C).Insert bolts(AA)
with washers (BB) and tighten half way using the Hex wrench
(EE). Do not tighten completely. ( Fig 2)
2
Attach the right arm (D) to seat (A), fasten with bolts (AA)
and washers(BB). Tighten half way using the Hex wrench
(EE). Do not tighten completely. ( Fig 1)
Attach the back (B) to the right arm (D) insert bolts (AA)
with washers (BB) and tighten half way using the Hex
wrench (EE). Do not tighten completely. ( Fig 2)