HAMPTON BAY HDP00833 User manual

THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this lantern. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
CHARTWELL 1-LIGHT SMALL LANTERN
Item # 1007183438
Model # HDP00833
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM

2
Table of Contents
Safety Information .................................. 2
Warranty .......................................... 2
Pre-Installation ..................................... 3
Planning Installation ............................... 3
Tools Required .................................... 3
Hardware Included................................. 3
Package Contents ................................. 4
Installation ...................................... 5, 6
Care and Cleaning .................................. 7
Troubleshooting .................................... 7
Safety Information
□Consult a qualied electrician with any electrical questions
you may have. IMPORTANT: Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have occurred
during shipping. If there is a defect in the wire, do not
continue the assembly process. Please call our Customer
Service Team at 1-855-HD-HAMPTON.
Warranty
3-YEAR LIMITED WARRANTY
WHAT IS COVERED
The manufacturer warrants this lighting xture to be free from defects in the materials and workmanship for a period of three (3) years
from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use. If this
product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the
product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modications,
alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, assembled,
or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the
product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material
or workmanship.
WHAT IS NOT COVERED
This warranty shall not apply to the nish on any portion of the product due to weathering, as this is considered normal wear. The
manufacturer does not warrant and specically disclaims any warranty, whether expressed or implied, other than the warranty contained
herein. The manufacturer specically disclaims any liability and shall not be liable for any consequential or incidental loss or damage,
including but not limited to, any labor or expense costs involved in the replacement or repair of the product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.

3 HAMPTONBAY.COM
Pre-Installation
PLANNING INSTALLATION
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. Inspect each part for defects that
may have occurred during shipping. Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB CC DD
EE FF HH
Part Description Quantity
AA Wire nut 3
BB Mounting plate 1
CC Outlet box screw 2
DD Mounting screw 2
EE Ground screw 1
FF Small nut 2
GG Rubber washer 2
Please contact 1-855-HD-HAMPTON for further assistance.
NOTE: This lantern requires the use of one 120V, 60Hz,
60-Watt max., medium-base type A bulb (not included).
Do not exceed the recommended wattage.
Safety
goggles
Phillips
screwdriver
Flathead
screwdriver
Pliers
Silicone
Wire
strippers
Wire
cutters
Ladder Electrical
tape
HH Finial 2
GG

4
Pre-Installation (continued)
PACKAGE CONTENTS
Part Description Quantity
A Lantern body 1
B
Cap (Pre-assembled on the socket (B))
Socket (Pre-assembled on the lantern body (A)) 1
C
Glass shade
1
D1
A
B
C
D
E
Socket ring (Pre-assembled on the socket (B))
E1

HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
5
Installation
1
Removing the mounting plate
□Remove the mounting plate (BB) and two rubber washers (GG)
from the lantern body (A) by unscrewing two nials (HH).
2
Installing the mounting plate
□Turn off the switch at the wall.
Turn the power off at the main fuse box.
Attach the mounting plate (BB) to the outlet box using the
outlet box screws (CC).
3
Connecting the wires
□
□
□
□
Install the xture bare copper ground wire (1) under the ground
screw (EE) on the mounting plate (BB).
Connect the xture bare copper ground wire (1) to the green (or
bare, or green and yellow) supply ground wire (2) in the outlet box
using a wire nut (AA).
Connect the white xture wire (3) to the white (or ribbed) supply
wire (4) in the outlet box using a wire nut (AA).
Connect the black xture wire (5) to the black (or red, or blue)
supply wire (6) in the outlet box using a wire nut (AA).
House wire
black
(or red, or blue)
(HOT)
House wire
white
(NEUTRAL)
Fixture wire
Black
(HOT)
Fixture wire
White
(NEUTRAL)
Fixture wire
Bare wire
(GROUND)
House wire
green
(or bare wire,
or green & yellow)
(GROUND)
5
34 AA
EE 6 112
BB
CC
□
□
DANGER: Ensure the power is off at the main fuse box
prior to beginning installation.
BB A HHGG

DD
B
B
C
D
E
A HHGG
Bulb
(Not included)
6
Installation (continued)
4Installing the lantern
□
□
Push all excess wires into the outlet box.
Align the holes of backplate with two mounting screws (DD),
and then secure the xture body (A) to the wall with two rubber
washers (GG) and two nials (HH).
Prior to installing the bulb, inspect the socket for a silica
packet. If a packet is present, remove and throw away. Do not
expose to children and pets.
Install one 120V, 60HZ, 60-watt max. medium-base type A bulb
(not included) into the socket (B).
5Assembling the glass shade
□
□
□
Remove the socket ring (E) and the cap (C) from the
socket (B) by unscrewing the socket ring (E).
Place the cap (C) onto top of the glass shade (D).
Place the cap (C) and the glass shade (D) over the socket (B),
and then secure with the socket ring (E).
6
Installing the bulb
□
□
Apply silicone or RTV compound (not included) between the edges
of the backplate and wall.
7
Sealing the mounting surface
□

HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
7
Care and Cleaning
Troubleshooting
□Clean the light xture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Problem Possible Cause Solution
The bulb will not light. □The bulb is burned out. □Replace the light bulb.
□The power is off. □Ensure that the power supply is turned on.
□There is a faulty wire connection. □Check the wiring.
□The circuit breaker is off. □Ensure that the circuit breaker is set in the
on position.
The fuse blows or a circuit breaker
trips when the light is turned on.
□There is an exposed wire.
□There are too many items on one circuit.
□Discontinue use of the light xture.
Unplug other items on the circuit.
r
□Contact a qualied electrician or
call the Customer Service Team at
1-855-HD-HAMPTON.
□

Retain this manual for future use.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM