Regent Lighting Solutions Halo User manual

1
2
www.regentlight.co.za
INSTALLATION INSTRUCTIONS
ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
1
2
PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.
PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.
Regent Lighting reserves the right to change specifications modify designs and discontinue items without
incurring obligation and whilst every effort is made to ensure that descriptions, specifications and other
information in this catalogue are correct, no warranty is given in respect thereof and the company shall not be
liable for any error therein.
WARNING: TO AVOID FIRE, SHOCK OR DEATH
ALL LUMINAIRES SUPPLIED AND TO BE INSTALLED ABOVE AND BELOW 5 METERS ARE IN COMPLIANCE WITH SANS
60598 SECTION 3.5.6 ACCORDING TO THE MANUFACTURER GUARANTEE AND WARRANTY
TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF BEFORE WIRING
Electrical products can cause death, injury, or damage to
property. Installation of this product must be carried out
by a qualified electrician, in compliance with SANS 10142
or corresponding regulations of the country of installation.
On completion of installation, the Certificate of
Compliance must be updated.
Halo
WARNING
Electronic/Magnetic Control Device
ELECTRIC SHOCK
HAZARD
This equipment is to be
serviced by trained
personnel only.
WARNING
Electronic/Magnetic Control Device
ELECTRIC SHOCK
HAZARD
This equipment is to be
serviced by trained
personnel only.
3 - 13 MAIN REEF SERVICE ROAD, CORNER
SPRINGBOK AND MAIN REEF ROAD, INDUSTRIA,
JOHANNESBURG. SOUTH AFRICA.
TEL : [phone]
www.regentlight.co.za
RE GENT L I GHT ING A D IVIS ION
OF WA HL IND USTR IES.
Save These Instructions for Future Reference
Save These Instructions for Future Reference
Access door to face in
the same direction as the
two bolts.(If applicable)
2 Ensure the your cage is
installed correctly. you
s h o u l d h a v e y o u r
threa d e d r o d 2 6 m m
above the ground
The two bolts face away
from the road at a 90
degree angle and that
the pole has the correct
diameter of ø76mm.
Halo
ŸBe sure the electricity
to the system you are
working on is
isolated.
Requirements:
ŸIf the main supply
power (live) is on, it
will cause damage
to the luminaire.
1. Fiting as supplied in
Regent Lighting
Solutions box.
DO NOT CONNECT THE FITTING LIVE
April 2020
Complete Halo
tting.
Replaceable
electrical
components
For non user replaceable light source: The light source contained in this luminaire
shall only be replacedby the manufacturer or his/her service
agent or a similar qualied person
www.regentlight.co.za
Stepped Modern Pole
Bolts
Access
door
Plan view 26 50
Ground level

www.regentlight.co.za
www.regentlight.co.za
3
4
7
8
5
This product should be installed by a competent person i.e. Qualified electrician.
This product requires a constant stable electrical supply 220V - 240V VAC 50Hz - alternating current.
The product must be regularly maintained, including the replacement of lamps/LED timeously.
This product could be HAZARDOUS if not used correctly, it could cause electric shock, serious bodily harm or death.
This product is not a toy, please keep away from children.
This product may contain small parts that can be swallowed.
Use only the correct light bulbs/LED as stipulated on the carton for the product.
Any modifications of this product after supply will result in the guarantee being void.
Spare parts may become unavailable over time.Items can vary slightly from the picture on the carton
Coastal humidity can affect the longevity of the light fitting over time.
Be sure to follow the steps in the order given.
Read instructions carefully.
Important Safety Instructions
6
7
The above testing allows access to the Driver and LED compartments, however
these test should only be carried out by trained professional, incorrect handling of
the delicate components could cause further damage to the luminaire. If the
luminaire is opened for testing, all components must be re-assembled as before,
as incorrect re-assembly will impact the IP rating of the luminaire.
4A. Connect the tting
power lead to the pole
power lead using the
m a l e f e m a l e
connector.
4B. Test the tting to
m a k e s u r e a l l
c o n n e c t i o n s a r e
working.
Replaceable
electrical
components
-Lift the tting of the pole, be
sure to secure the tting as it
may fall to the ground and get
damaged.
-To begin fault nding, loosen
the 3 grub screws on the body
bottom.
-Carefully lift the gear tray out
of the pole, Be careful not to
damage of pull out any cables
when removing the gear tray.
-To check the LED, remove the
four screws on the body top of
the tting and lift up the body
top. Be careful not to pull or
damage any cables.
In the event of a failure.
-First check circuit breaker
before opening tting
3A. Insure the pole is
orientation is correct, the
pole bend is facing way
from the road.
3B. Prepare the cable
f r o m t h e p o l e t o b e
connect to the laminar.
4
Grub screw
Align and fasten the fitting to
pole via the 3 stainless steel grub
screws on the sides of the fitting
mount, using an allen key.
5 I n s u r e t h a t t h e f i t t i n g s
orientation is correct, facing
towards to the road at a 90
degree angle as shown in the
Image 3.
Inner and
outer gasket
Body top
Body bottom
Road
A
Ø76mm pole
B
Pole
Click*
*
Gear tray
A
B