Hanna Instruments HI 60503 User manual

HI 60501 • HI 60503
IMMERSION ELECTRODE HOLDERS
For Tanks, Vessels, Baths and Open Channels
Dear Customer,
Thank you for choosing a HANNA product.
This sheet will provide you with the necessary information for a correct
operation. Please read it carefully before using the holder.
If you need additional technical information, do not hesitate to e-mail us
at [email protected].
Examine carefully the holder and if any damage has occurred during
shipment, immediately notify your Dealer or the nearest Hanna Cus-
tomer Service Center.
These adjustable length holders for pH and ORP electrodes, have been
designed for immersion applications.
Simply adjust the flange (HI 605011) to the required length and install.
These holders have been specifically designed to be used with HANNA
3/4’’ process pH and ORP electrodes with built-in temperature sensor
and matching pin.
SPECIFICATIONS HI 60501 HI 60503
Electrode Holder Material PVC PVDF
O-Ring Material NBR (Buna N)
Min. Immersion Length 10 cm (3.9’’)
Max. Immersion Length 69 cm (27.1’’)
Operating Temperature -10 to 60°C (14 to 140°F) -15 to 100°C (5 to 212°F)
ACCESSORIES
HI 605011 PVC mounting flange (required
HI 60501-0 1 set of O-rings
www.hannainst.com