Hanover HANGHMN-1NAT User manual

You must read these instructions carefully before you start to assemble it.
the assembly of the whole product.
Overall Size/inch: L39"x W23.5"x H12/17"
Overall Size/CM: L99 x W59.5 x H31/43.5
9820110
Assembly Instruction
quantity as mentioned in the list.
Do not tighten the steps until completing on
IMPORTANT
Please ensure that you find all parts in the correct type and
Please carry out the steps according to the instructions.
Keep the instruction manuals in a safe place for future reference.
Cold Frame

2


IMPORTANT
Ifyouhaveanyproblemswiththisproduct,please
DONOTRETURNTHISITEM
TotheRetailer/Storefromwhereyoupurchasedtheproduct.

Pleaseemailusanytimewiththenatureoftheproblemat:
ContactUs@Hanover‐Products.com
Pleaseinclude:
Picturesoftheissue(s)andreceipt(ifavailable)
NameandaddressofthePurchaser
Nameofretailer

OrcallourCustomerServiceteambetween9:00AMand5:00PMEasternTime,
MondaythroughFridayat:
1‐877‐397‐5144
orvisitourwebsiteat:
www.Hanover‐Products.com

Toexpediteanyfuturewarrantyclaims,pleaseretainyourreceiptforfutureuse.

Foradditionalon‐linesupportonassembly,troubleshootingandcare&maintenanceofyouroutdoor
product,pleasevisitourwebsiteat:www.Hanover‐Products.com.
8/1/2019

3
10FT
BEFORE YOU START
TOOLS MAY REQUIRED
Use heavy duty gloves when handling steel sheets and flashing
PLAN AHEAD
Watch the weather:
Please be sure the day you select for installation is dry and calm.
DO NOT attempt to assemble your shed in windy weather
because of risk of damage to panels, or personal injury. Be careful
of wet or muddy ground.
Teamwork:
Whenever possible, two or more people should work together to
assemble the building. One person can position parts or panels
while the other is able to handle the fasteners and the tools.
1/10"
1/5"
5/16"
Owner's Manual
Assembly instructions
Instructions are supplied in this manual and contain all appropriate information for your
building model. Review all instructions before you begin. During assembly, follow the
step sequence carefully for correct results
.
Parts
Check to be sure that you have all the necessary parts for the building.
Separate contents of the carton by the part number while reviewing parts list.
Familiarize yourself with the hardware and fasteners for easier use during
construction. These are packaged within the carton. Note that extra fasteners have been
supplied for your convenience.

4
16 20"
Drawing
Parts List
43cm
60cm
99cm
31cm
64
A4 1
A3 1
A2 2
A1 2
74
82
13 2
12 2B1 1
B2 2
14 2
15 2
F2 8
No Qty
No Qty No Qty
No Qty Inch
Line
Drawing
Line
Drawing
Line
35"
4
39"
23.5"
17"
12"

5
14,15 into anchors.
Front Corner Caps Installation
15
14
Rubber Strip B2
Rubber Strip B1
1Insert the wall panels into anchors.
3
2
6
6
6
6
A4
A3
A2
A2
7
7
7
Wall panels are pre-installed.
Insert the four corner profiles
B1
B2
14
15
SUMMARY STATEMENT FOR INSTALLATION