Hodedah HI2007-Z User manual

ITEM#HI2007-Z
OFFICE CHAIR
1 person
30 mins
1 Box
1 YR LTD
H38.2"W23"D17.7"

4
Bolt
Bolt
81
Allen Key
Ø6*35mm Ø6*20mm
121
111
1
5
Chair back Chair arms
Base
Caster
Gas bar
Plastic cover
Metal base
Chair seat

C
A
B
B
A
1
B
2
4
3
8
6
7
5

●
Attach caster (8) to base(6) .(see photos for example)
Insert plastic cover (7) on base(6).
●
8
6
6
7

●
Attach gas bar (5) to base(6) .(see photos for example)
Attach chair arm(2) on chair back(1), screw 4 X bolt(B) with allen key (C) in the hole after four
holes aligned .(see photos for example)
●
5
6
HARDWARE REQUIRED
C
4*B
2
1
C
B

●
Attach chair seat (3) on chair arm (2),screw 4 X bolt(A) with allen key (C)in the holes.
(see photos for example)
Attach metal base (4) on bottom of chair seat (3),fix screw 4 X bolt(B) with allen key (C) in the
holes after four holes aligned ,then tighten screw.(see photos for example)
●
HARDWARE REQUIRED
C
4*A
HARDWARE REQUIRED
C
4*B
C
A
B
C
3
2
4
3
Step 6

●
Put chair seat (3) on top of gas bar(5), let the gas top into metal base hole, sit on chair to let
gas bar attach together.(see photos for example)
3
4
Tighten all screws after every part is in the right position;
●
5
Step 7