Happy Beds Loxley Ottoman 4ft Velvet Bed User manual

Title of Product
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
.
Health & Safety:
.
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product, to avoid
scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep these instructions for future reference.
Loxley Ottoman 4ft, 4ft6 & 5ft Velvet Bed

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

Thank you for
purchasing a
product.
For a chance to win a Love 2 Shop
voucher simply post a picture of your
new product on your preferred social
channels tagging Birlea Furniture and
using the hashtag
and #Birlea . One winner will be
selected at random each month.
To view our full terms and conditions please visit www.birlea.com
Are you happy with your purchase?
That’s great, we would love to hear more from you. Please leave us a review on our
social media channels or Trustpilot. Your feedback will be greatly appreciated
If for any reason there is something missing, indifferent or incorrect with your order,
please contact the retailer you purchased the item from. We will work with the retailer
to resolve your issue as quickly as possible.
Assembly Instructions
Birlea
#ShareYourStyle
Yes:
No:
Page 1 of 8

If your desired room of choice has a non-carpeted surface please ensure that you use some form of
anti-slip protection and do not place directly on the wooden floor. This will prevent the bed from moving
and therefore collapsing which will void your guarantee..
Assembly Instructions
Page 2 of 8
For Care and Maintenance of your bed...
• Always assemble in your desired room of use.
• Always check all screws and fixings periodically
to ensure they are still secure.
• Do not push or pull this bed as it will cause
damage.
• Always lift this bed with a second person to
prevent damage or injury.
• Keep any sharp objects away from this bed
• Please don't not jump on this Bed.
• Do not use this bed if you find missing, damaged
or worn parts. Please contact your retailer.
• Please do not use this bed until you have fully
secured all fixings.
• Please keep all small components away from
children.
• Please ensure this bed is on an even, level
surface.
Also...
1. Please check you have received the correct product.
2. Unpack all boxes and lay out each component on the floor.
3. Check your product for any damage that may be immediately obvious. If damage is identified,
please contact your retailer.
4. Please read through these instructions thoroughly to ensure you have constructed your bed
correctly.
Loxley Ottoman Bed - King
Before you begin...
For your Health and Safety...
Frame.

J.
M8x30mm Bolts (x8)
S. M8x40mm Bolts (x6) Y M6x16mm Bolts (x16)
V. (X4)corner bracket
E.metal hook (X2)
B1. Baton (x1)
C1. M4 Allen Key (x1)
Page 3 of 8
Box 1
A.Headboard (x1)
Box 2
B. Side Rails (x2)
F. Footboard (x1)
G. Support Leg (x1) I. Legs (x4)
K. Nuts (x12)
M. Flat Washer (X8) N. Spring Washer (x8)
O. M5 Allen Key (x1) P. Spanner (x1)
Q. Slat Caps (x28)
R. Centre Slat Caps (x14)
U. Pull Strap (x1)
D. Left & Right Frame Rail (x2)
L. M8x45mm Bolts (x4)
BOX 3
C. Centre Support Rail (x1)
T. Bed Cross Bar(x4)
H.Slats(x28)
W.Front and Back Frame Rail(x2) X.Cross Support Bar(x2)

J.
M8x30mm Bolts (x8)
S. M8x40mm Bolts (x6)
Y M6x16mm Bolts (x16)
Page 4 of 8
Step 1
Unpack all components from the boxes and check you are not missing anything. Please check these against the list on
page 3 & 4. Should you identify any missing components, please contact the retailer you purchased the bed from.
Box 2
Cont...
Z. M8x16mm Bolts (x4) A1. M8x65mm Bolts (x4)
BOX 3
D1.Support Board（X2） E1.Support Board（X2）

A
B
A
F
Page 5 of 8
F
Step 3
Attach 2x Side Rails (B) to 1x Headboard (A) and 1x Footboard (F) using 8x M8x30mm Bolt (J), 8x Spring Washer (N), 8x
Flat Washer (M) and 1x M5 Allen Key (O).
Step 2
Attach 2x Legs (I) to the 1x Headboard (A) and then attach 2x Legs (I) to the 1x Footboard (F). Please do not use any
power tools for this assembly as it will void your guarantee.
I
J
N
M
O
3
2
H
4

V
C1
C1
Y
Y
V
M4 allen key(C1).
Fix Support Boards 2X(D1)and 2X(E1) to above the Bed Cross Bars (T)
Y
D1 E1E1
E1
D1
C1
Step 4:
To attach the corner bracket (V)to the headboard(A),footboard(F) and side rails(B)you will need to use hardware
parts 8X (Y) and the M4 allen key(C1).M6x16mm Bolts
To fix the 4 X bed cross bar(T) to the side rails ,you will need to use hardware 8X (Y) and the M6x16mm Bolts
DO NOT use any power tools as this may damage the bed frame and will invalidate any claims.
Step 5:
Page 6 of 8

SO
S
O
C
G
K
P
K
P
D
W
O
O
O
D
Z
Z
S
OP
K
W
Z
O
Z
E
with the M5 allen key(O) and the spanner(P).
To attach the Baton (B1)TO the footboard(F) you will need to use hardware parts
2x (L) .M8x45mm Bolts wıth the M5 allen key(O)
O
OO
A1
LA1
KK
K
PP
P
O
OL
B1
Step 6
DO NOT use any power tools, this may damage the bed frame and will invalidate any claims.
To attach the front frame rail(W)and back frame rail（W）to the left frame rail (D)and right frame rail(D),
you will need hardware parts 4 X (Z) with the M5 allen key(O). M8x16mm Bolts
To attach the centre support bar（C) to the front frame rail(W)and back frame rail(W),you will need hardware
parts 4X (S) and 4X (K) with the M5 allen key(O) and the spanner(P). M8x40mm Bolts Nuts
To attach the support leg（G） to the centre support bar(C),you will need hardware parts 2X (S)M8x40mm Bolts
and 2X (K) with the M5 allen key(O) and the spanner(P). Nuts
Insert the metal hook(E) to the front frame rail(W).
Page 7 of 8
To attach the metal frame(W/C/D) and cross support bar(X)to the gas lift pre-fixed to the side rails,
you will need to use hardware parts 4X (L) and 6x (K) M8x65mm Bolts(A1) , 2 XM8x45mm Bolts Nuts
X
X
Step 7

Page 8 of 8
U
W
Step 8
Q
H
H
B
R
C
Slot each Slat Cap (Q) onto the end of each Slat (H), then slot each Slat (H) into each Centre Slat Cap (R).
Press firmly into each slat rail located on the inside of the side rails (B) and then into the Centre Support Rail (C).

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the pieces across the
floor as this will cause damage to the joints and could result in failure to the product that will
invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes