Harbor Freight Tools 03491 User manual

ASSEMBLY INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright © 2003 by Harbor Freight Tools®. All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions please call 1-800-444-3353
WALL MOUNTABLE
SHELF
02/03

SKU 03491 PAGE 2
SPECIFICATIONS
SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
DESCRIPTION
32.5” X 8.5”W X 7”
ABS Frame, Polystyrene Drawers & Seperators
Grey ABS Frame, Clear Drawers & Seperators
13-7/8” L X 7-3/8” W X 2-3/8” H
7.90 Lbs.
ITEM
Overall Dimensions
Materials
Color
Drawer Dimensions
Net Weight
1. KEEP PRODUCT USAGE AREA CLEAN. Cluttered areas invite injuries.
2. KEEP CHILDREN AWAY FROM PRODUCT USAGE AREA. Do not allow children
to play with this product or contents of these Drawers. Locate in an area out of the reach
of children.
3. CHECK FOR DAMAGED PARTS. Before using this product, carefully check that it
will operate properly and perform its intended function. Check for damaged parts and
any other conditions that may affect its operation.
4. REPLACEMENT PARTS AND ACCESSORIES. There are no replacement parts for this
product.
5. WEAR SAFETY GOGGLES (Must comply with ANSI) at all times when assembling.
6. USE EXTREME CAUTION when hanging Shelf. Avoid electrical wires or other obstacles.
7. AVOID SHARP EDGES WHEN ASSEMBLING.
8. DO NOT OVERLOAD WITH CONTENTS. Maximum weight capacity = 25 Lbs.
Note: Maximum weight capacity for the Wall Mountable Shelf is 25 Lbs.
Do not exceed this maximum weight capacity.

ASSEMBLY INSTRUCTIONS
1. This innovative Wall Mountable Shelf (#1) fits in many different places; house, workshop, and
tabletop.
2. Remove Drawers (#2) easily. Place Separators (#3) in Drawers. Replace Drawers in frame.
(See Figure 1)
SKU 03941 PAGE 3
#2
#3
TO MOUNT ON THE WALL
( Appropriate hardware is not included.
Opening is 1/4” W X 3/4” H for hardware.)
Figure 1
1. The Wall Mountable Shelf (#1) can be hanged on the wall with pressure screws fixed
through Mounting Holes (#4) on back of Shelf. (See Figure 2). Securely mount Wall Shelf on
solid wood, but if using dry wall, use “Molly Bolts” (not included).
Figure 2
#4
#1
2. The maximum weight of materials stored in Wall Mounted Shelf is approximately 25 Lbs.
Do not overload.

PARTS LIST
PART # DESCRIPTION QTY
1
2
3
4
1
4
16
3
SKU 03491 PAGE 4
MAINTENANCE
1. For better and safer performance, keep all parts of this product clean and dry.
2. Periodically check to see that all hardware is in place.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS
MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO
REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES
ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACE-
MENT PARTS THERETO.
Mountable Wall Shelf
Drawers
Separators
Mounting Holes
#2
#3 (Not Shown)
#1
#4 (Not Shown)