Harbor Freight Tools 92099 Maintenance and service guide

9 Drawers Including Top Compartment
ITEMS
Specifications
Total Wt.
Capacity 840 lbs.*
Drawer Size Capacity
Chest (Top) 41” x 17-1/2” x 5” 135 lbs.*
Weight 152 lbs. 1-3 (Upper Left) 22-3/8” x 16” x 2-3/4” 90 lbs.* ea.
Material Steel 4 (Bottom Left) 22-3/8” x 16” x 6” 110 lbs.*
Rails Ball-Bearing 1-3 (Upper Right) 12-1/4” x 16” x 2-3/4” 75 lbs.* ea.
Lid Support Dual Gas Strut 4 (Bottom Right) 12-1/4” x 16” x 6” 100 lbs.*
Designed to fit on top of
SKU 90320 / 91363 / 95403 / 98084
(13 Drawer Roll Cabinet)
*ALWAYS BE AWARE OF
DYNAMIC LOADING!
If you suddenly drop a weight
on the Tool Chest it may create,
for a brief instant, an excess
load potentially causing property
damage, SERIOUS PERSONAL
INJURY and/or DEATH.
Top ChesT
®
1. Improper use can cause the Chest to tip, causing PERSONAL INJURY or DEATH.
• Do not exceed the 840 lbs. total weight capacity (dead weight, see Dynamic Loading
above). Never exceed the weight capacity for the top chest or any one drawer.
• Do not open more than one drawer at a time.
• Load the Chest evenly from the bottom up.
2. Only lift the Chest with a partner and only while empty. If the Chest is still too heavy, get
further assistance; attempting to lift an object that is too heavy can result in SERIOUS
PERMANENT PERSONAL INJURY.
3. Wear ANSI-approved safety goggles when working with tools and equipment.
4. Do not stand or climb upon this Chest.
Safety and Operating Instructions
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.Failure to do so can result in serious
injury. SAVE THIS MANUAL.
Copyright©2008 by Harbor Freight Tools®. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
92099
95405
95517
98103

LIMITED 90 DAY WARRANTY
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and
durability standards, and warrants to the original purchaser that this product is free from defects
in materials and workmanship for the period of 90 days from the date of purchase. This warranty
does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents,
repairs or alterations outside our facilities, criminal activity, improper installation, normal wear
and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons
or property, or for incidental, contingent, special or consequential damages arising from the use
of our product. Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EX-
PRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with trans-
portation charges prepaid. Proof of purchase date and an explanation of the complaint must
accompany the merchandise. If our inspection verifies the defect, we will either repair or replace
the product at our election or we may elect to refund the purchase price if we cannot readily and
quickly provide you with a replacement. We will return repaired products at our expense, but if
we determine there is no defect, or that the defect resulted from causes not within the scope of
our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which
vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • [phone]
Installing the Handles
Assemble both side Handles, one on each end of the Cabinet, using the included Bolts through the holes.
All of the nuts required for assembly come pre-mounted in their holes. Tighten securely.
How to mount Top Chest onto Item 90320 / 91363 / 95403 / 98084
(13-Drawer Roll Cabinet)
Install the handles first. Using an assistant, carefully lift the empty chest onto the Cabinet and make sure
the corners fit between all 4 brackets on top of the Cabinet.
NOTE: ALL DRAWERS MUST BE PUSHED IN FULLY BEFORE CHEST WILL LOCK.