Harrod BAS-029 User manual

BAS-029, BAS-030 & BAS-031
Heavy Duty Basketball
INS508
Revision 3
25/04/16
Harrod UK Limited©
Code:
Product:
Pack Contents:
View of Product
SOCKET TYPE
CONTENTS GIVEN ARE
FOR ONE GOAL ONLY
PARTS:
1. 1 x Upright (FEQ070)
2. 1 x Backboard
BAS-029 (FEQ079)
BAS-030 (FEQ073)
BAS-031 (FEQ075)
3. 1 x Ring (PEQ059)
4. 1 x Net (BAS-001)
5. 1 x Board Support L/H (PEQ071)
6. 1 x Board Support R/H (PEQ072)
7. 1 x Ring Plate (not required) (PEQ058)
PEQ058 is a square plate that is not needed for
this particular goal.
(not shown)
FITTINGS:
8. 4 x M10 Nut (BOL200)
9 4 x M10 Nylock Nut (BOL202)
10. 4 x M10 50 long Bolt (BOL310)
11. 2 x M10 120 long BZP Bolt (BOL250)
12. 2 x M10 50 long Coach Bolt (BOL311)
13. 1 x Socket (Socket type only) (PEQ075)
14. 1 x Cap (CAP103)
VIEW SHOWING DIMENSIONSVIEW SHOWING DIMENSIONS
914x914x914mm Minimum
Concrete Cube.
13
1
2
3
914mm
1239mm
3050mm
Ground Level
14
914mm
914mm
914mm

BAS-029, BAS-030 & BAS-031
Heavy Duty Basketball
Code:
Product:
IMPORTANT PLEASE READ THE ASSEMBLY INSTRUCTIONS
CAREFULLY BEFORE STARTING TO ASSEMBLE YOUR GOAL. THIS
GOAL MUST BE ASSEMBLED BY 4 COMPETENT ADULTS.
Assembly Instructions
1
2
Dig a hole 915mm deep and 915 x 915mm square and use a cube of concrete to secure post. If socket is used, the same
measurements of concrete will be required.
Mark a line on the upright which is 914mm from the base. Insert the upright into the hole making sure that this mark is
inline with ground level. Then fill the hole with concrete. Support the upright as shown in the assembly instructions.
Use spirit level to ensure that the upright is vertical. If socketed type goals, concrete the socket in so that the top of
socket is at ground level.Also use a spirit level to ensure the socket is vertical.
When the concrete has set, assemble the ring to the backboard, then fit the backboard to the board supports and secure
to the upright using nuts and bolts provided. (See pack contents)
3
5
12
6
10
9
11
8
Ground LevelGround Level
SUPPORT WHILE CONCRETE SETS
SUPPORT WHILE CONCRETE SETSSUPPORT WHILE CONCRETE SETS
SUPPORT WHILE CONCRETE SETS
SUPPORT WHILE CONCRETE SETSSUPPORT WHILE CONCRETE SETS
Ground LevelGround Level