Harrod FBL-683 User manual

FBL-683: 7.32x2.44m 3G Euro Portagoal
1. 2 x 7.32m 3G Stadium Crossbar (FEP360)
2. 2 x 2440mm 3G Portagoal Upright (FEP284)
3. 2 x Portagoal Brace 1487mm (PEQ335)
4. 2 x 2270mm Euro P/Goal Sidebar (PEP631)
5. 2 x Senior WTD P/Goal Ali Net Bar (PEQ710)
6. 4 x Euro Portagoal Net Support Bracket (FEP632)
7. 2 x 7292mm Euro Portagoal Backbar (FEP634)
8. 2 x Euro P/Goal Net Support - Black (PEP639)
2 x Portagoal Brace - Pair (FEP674)
2 x 2270mm Portagoal Sidebar - Pair (FEP631)
1 x Senior WTD P/Goal Ali Net Bar (FEQ805)
2 x Euro Portagoal Net Supports (FEP639)
(contains)
(contains)
(contains)
(contains)
6
7.32x2.44m 3G Euro Portagoal, 6.4x2.13m 3G Euro Portagoal,
4.88x2.13m Euro Portagoal
INS683
Revision 8
04/08/2017
Harrod UK Limited©
Code:
Product:
Pack Contents:
FBL-683, FBL-690, FBL-695
Net:-
There is no net supplied with this goal. To purchase a
net please contact our Sales office who will be able to
provide you with a suitable distributor - Please quote
Net Number:
FBL-684 for Senior Goal
FBL-691 for Junior Goal
FBL-696 for 9v9 Goal
FBL-690: 6.4x2.13m 3G Euro Portagoal
1. 2 x 6.4m 3G Crossbar (FEP361)
2. 2 x 2.13m 3G Portagoal Upright (FEP286)
3. 2 x Portagoal Brace 1487mm (PEQ335)
4. 2 x 2.13m Weighted P/Goal Sidebar (PEP637)
5. 2 x Junior WTD P/Goal Ali Net Bar (PEQ711)
6. 4 x Euro Portagoal Net Support Bracket (FEP632)
7. 2 x 6372mm Euro Portagoal Backbar (FEP640)
8. 2 x Euro P/Goal Net Support - Black (PEP641)
2 x Portagoal Brace - Pair (FEP674)
2 x 2.13m Portagoal Sidebar - Pair (FEP637)
1 x Junior WTD P/Goal Ali Net Bar (FEQ806)
2 x Euro Portagoal Net Supports (FEP641)
(contains)
(contains)
(contains)
(contains)
IMPORTANT PLEASE READ THE
ASSEMBLY INSTRUCTIONS
CAREFULLY BEFORE STARTING
TOASSEMBLEYOUR GOAL
1
3
4
2
5
7
8
View of Product
Tools Required
1 x 17mm Spanner
1 x 8mm Allen Key (Supplied with fittings)
1 x 6mm Allen Key (Supplied with fittings)
1 x 4mm Allen Key (Supplied with fittings)
FBL-695: 4.88x2.13m 3G Euro Portagoal
1. 2 x 4.88m 3G Crossbar (FEP378)
2. 2 x 2.13m 3G Portagoal Upright (FEP286)
3. 2 x Portagoal Brace 1487mm (PEQ335)
4. 2 x 2.13m Weighted P/Goal Sidebar (PEP637)
5. 2 x 4.88m WTD P/Goal Ali Net Bar (PEQ712)
6. 4 x Euro Portagoal Net Support Bracket (FEP632)
7. 2 x 4852mm Euro Portagoal Backbar (FEP595)
8. 2 x Euro P/Goal Net Support - Black (PEP641)
2 x Portagoal Brace - Pair (FEP674)
2 x 2.13m Portagoal Sidebar - Pair (FEP637)
1 x 4.88m WTD P/Goal Ali Net Bar (FEQ807)
2 x Euro Portagoal Net Supports (FEP641)
(contains)
(contains)
(contains)
(contains)
Optional Wheels:
FBL-560 Hi-Raise Wheels for Euro Portagoal
If optional wheel have been purchased, please have
the bolts ready for use during assembly of the goal.

Code:
Product:
Fittings
Fig. 2.6
Fig. 2.2
Fig. 2.3 Fig. 2.4
Fig. 2.5
1 x 3G Euro Portagoal Fittings Pack (FPK683)(contains)
9. 64 x M10 x 25 Square Screw 19mm A/F (BOL336)
10. 40 x M10 C Form Washer S/S (BOL709)
11. 4 x 155x75x8mm Steel L-Plate - Tapped (PEP062)
12. 4 x 3G Portagoal Joint Plate 120x38x10 (PEP299)
13. 48 x M10 Nylock Nut BZP (BOL202)
14. 4 x Net Holder (CLP055)
15. 4 x M6 x 10mm A2 SKT Button S/S (BOL672)
16. 8 x Aluminium Football Spacer (APP150)
17. 4 x Bolt M10x40 Socket Button Head Screw (BOL321)
18. 4 x M10 Female Handwheel (BOL399)
19. 4 x B/Supp Top Bracket - Black (PEP328)
20. 16 x M10 x 30 Cap Screw STST (BOL333)
21. 8 x M10 Hex Head Binx Nut (BOL201)
22. 2 x Ali Net Bar Bracket (Pair) (ASY821)
23. 4 x 55mm Net Bar Bracket Plate - White (PEP638)
24. 4 x Euro Portagoal Hook Bracket - Black (PEP844)
25. 1 x Euro Net Hooks - 140 Pack (FPK384)
26. 4 x Six Links Welded Chain (BOL827)
27. 4 x 100 x 10mm Carbine Clip (HKS007)
28. 1 x U-Peg Type Anchor 10 Dia x 450 (PEG-021)
29. 4 x W.U./Portagoal Net Straps (STR110)
30. 4 x M10 Spacer 30mm Long Black Nylon (BOL739)
Fig. 2.1
Assembly Steps
FBL-683, FBL-690, FBL-695
7.32x2.44m 3G Euro Portagoal, 6.4x2.13m 3G Euro Portagoal,
4.88x2.13m Euro Portagoal
9
10
11
12 13
14 15
16
17 18
19 20
21
22
23
24
25
26
27
28
29
30

1
2
Use the pack contents to identify and check all the components. The goal
will be assembled in six stages as shown in Fig 2.
- Lay the crossbar (1), and uprights (2) on the
ground with the slots facing upwards and slide 2 square head bolts (9) into
the slots at both ends of the each crossbar, and 3 square head bolts into the end of
each upright.
Identify the crossbar edge using the identification label attached. Feed
the crossbar edge through the net holders (14) at each end of the crossbar as
shown in Fig. 6 and fix in place using an M6 x 10mm SKT button (15). Attach
the remainder of the net using the Euro Net hooks (25). Slot the net into the
hook, then slot the hook into the section and twist to lock in. Place one hook
every other mesh in the crossbar, and every other mesh in the uprights and
sidebars as shown in Fig. 6.
Crossbar and Uprights
Net -
3
6
Crossbar
Sidebar
Backbar
Net Bar
- Slide the upright onto the crossbar. Fit the Steel L Plate (11) onto
the bolts in the crossbar and the uprights and secure with washers (10) and
nuts (13). One square headed bolt should be left in the upright, this will be used
to fix the braces (3) further on in the assembly.
- Insert 5 square head bolts (9) (*7 if optional wheels are to be
fitted) into the sidebar (4) and fit the Joint Plate (12) with washers (10) and
nuts (13) (hand tighten 3 nuts and fasten the last enough to stop the plate sliding
down the section when the sidebar is lifted into position). Lift the side bar into a
vertical position and slide onto the upright. loosen the joint plate and slide into
position then fasten as shown in Fig. 5. Place an aluminium football spacer (16)
on each free bolt in the upright and backbar, fit a portagoal brace (3) onto the
spacers and fix in place using an M10 nut (13), as shown in Fig. 5, taking care to
ensure theat the sidebar is 90° to the upright. The goal will now resemble Fig.
2.2.
Evenly space yourselves around the goal, and slowly lift the goal onto its side
bars. If you have optional flip over wheels to fit, you will need to fit a further 4
square head bolts into the slot on each sidebar (these bolts will be supplied with
flip over wheels).
- Place the backbar (7) behind the goal, with the slots facing
upwards. Then slide 1 square headed bolt into each end of the backbar (*2 if
optional wheels are to be fitted) and 2 square head bolts into the ends of each
sidebar (*4 if optional wheels are to be fitted). Slide one Euro Portagoal Net
Support Bracket (6) into each end of the backbar and fix in place using two M10
x 30 Cap Screws (20). Take the backbar and bracket assembly and slide it into
the sidebars as shown in Fig. 2.4. Again, secure in place with two Cap Screws
(20).
- Take the Aluminium Net Bar ( 5) and weave it into the meshes at
the back of the net. At each end of the net bar, slide on an Ali Netbar Bracket
(22). Place a Net Bar Bracket Plate (23) over the two free bolts in each sidebar
and place the bracket on top, at this stage hand tighten only, two Hex Head Binx
Nuts (21) as shown in Fig. 8.
4
7
5
Please Note: For safety reasons, It is recommended that two or more people assemble goal.
Code:
Product:
Assembly Instructions
Fig. 4
Fig. 5
Fig. 6
Fig. 8
10
11 9
1
2
13
10
12
2
3
13
16
2
9
4
25 15
14
2
1
7
6
9
4
20
5
22
21
23
9
4
FBL-683, FBL-690, FBL-695
7.32x2.44m 3G Euro Portagoal, 6.4x2.13m 3G Euro Portagoal,
4.88x2.13m Euro Portagoal
4
*
Sidebar
Backbar
9*
*

Code:
Product:
Important safety note:
immediately
must
Now that you have assembled your goal, it is very important that the goal is
secured to the ground . To do this, fit one end of the Chain (26)
over the Square Head Bolt and secure with an M10 C Form Washer (10) & M10
Hex Nut (13) at the marked locations on the Backbar. Fit the Carbine Clip (27)
to the other end of the chain. Drive the U-Pegs at 45º into the ground through
the carbine clip to secure in place. The chain remain tight. Check the pegs
periodically for loose earth, re-position when required.
If used on a synthetic pitch, the goal must be suitably anchored to conform to
BS EN 748 or BS 8462. This can be achieved by either installing a ground
anchor below the synthetic grass level, by attaching to the nearest perimeter
fixing point or attaching 6 xANC-005.
Fig. 12
Fig. 11
Fig. 10
Fig. 9
0
19 9
13
17
8
10
18
13 10
27
28
7
9
26
8- Take an M10x40mm Bolt (17) and Spacer (30) and screw it
into a Euro Portagoal Hook Bracket (24). Insert an M10 square screw (9)
into the plain hole in the hook bracket and loosely screw on an M10 Female
Handwheel (18). Slide the hoop bracket assembly into the Net Support (8) and
tighten the hand wheel to nip the bracket in place. Take a B/Supp Bracket (19),
insert two M10 Square Screws and slide into the section as shown in Fig. 9. With
the top of the bracket flush with the top of the upright, fix in place with M10
Washers (10) and M10 nuts (13).
- Take the Net Straps (29) and clip the shorter end onto the top,
back corner mesh. Then count 18 meshes in from the corner and attach the
longer clip to this mesh. Remove the clip from the double end of the straps and
feed them through the B/Supp Bracket, reattach the clip and clip the straps
With the Handwheel loosened, allowing the loop
bracket to slide freely, attach the carbine clip with the attached headline to the
hook bracket. Repeat steps 8 & 9 for the other net support. Slide the net supports
into the corner brackets as shown in Fig. 10. (If optional wheels have been
purchased; fit the rear wheels before inserting the net supports and fit the front
wheels after)
- With the handwheel loose, pull the loop bracket
Tighten the handwheel to secure the headline. Take care when
loosening the handwheel to adjust the net tension, the tension can cause the
bracket to rise quickly. Once both sides are tensioned, slide the Aluminium net
bar back to tighten the bottom of the net and fix in place using the Binx Nuts
(21).
Net Supports
Net Straps
Tensioning the Net
Caution:
9
in
place as shown in Fig. 9.
1down the net support upright until the net reaches the desired shape.
down the net support upright until the net reaches the desired shape.
29
FBL-683, FBL-690, FBL-695
7.32x2.44m 3G Euro Portagoal, 6.4x2.13m 3G Euro Portagoal,
4.88x2.13m Euro Portagoal
24
30