Hasbro Tomy Zoids Chimera Dragon User manual

- 1-
NOTES:
• Please read instructions completely before assembling kit. Save instructions for
future reference.
• Easy snap-together fit! No glue is needed to assemble this kit.
• Remove plastic parts from frames according to the instructions. When removing
parts, trim off any excess plastic using scissors or other suitable tool.
• Each frame is lettered, and the parts on each frame are numbered. Each individual
part is also marked with its part number and letter. Please follow the letters and
numbers carefully and make sure you are assembling the right parts.
• Runner Frame J parts are identical in all Zi-buildersTM kits.
• Discard plastic bags immediately.
• This kit can be disassembled if necessary.
• When kit is completed, apply the labels anywhere you like.

-2-

-3-

-4-

- 5-

- 6-
Using the Extractor Tool:
Move tool gently to loosen
tight joint parts.
Extractor may not loosen some joints.
Be sure to assemble ring caps as shown.
Align octagonal piece as shown.

- 7-
Assembling the head.
Lens

-8-

- 9-
Top view
Assembling right front leg.

-10-
Top view
Assembling the left front leg.

- 11-
Assembling right front leg. Assembling the right hind leg.
Ring caps
Ring cap
Ring cap

-12-
Assembling the left front leg. Assembling the left hind leg.
Ring caps
Ring cap
Ring cap

- 13-
Assembling the wings: Step 1.
Left wing
Right wing
Ring caps
Ring caps

-14-
Assembling the wings: Step 2.
Left wing
Right wing
Top view
Ring cap
Ring cap

- 15-

- 16-
Ring caps
Ring caps

- 17-
Assembling the jaw.

- 18-

- 19-
Assembling the tail.

-20-
Side view