Hatco ATMOSPHERIC AWD-12 Series User manual

Quickly delivers 2, 3 or 4 quarts of 200ºF (93ºC) hot water for fast, easy food preparation
Dispensing can be interrupted for versatility and convenience
Manual dispense button permits additional water volume options
Compact and durable unit requires minimal counter space
12-gallon (45 liter) stainless steel tank provides up to 8 gallons (30 liters) of continuous hot water
Removable shelf allows access to dispense water into large containers
Tank is emptied easily with convenient bottom drain
At the simple push of a button, the new Hatco Atmospheric Water Dispenser
delivers pre-measured quantities of hot water for food preparation or cleaning.
Hatco provides hot water on demand for beverages, sauces, soups, gravy,
cereals, rice, pasta, potatoes, gelatins and other applications, from independent
to high volume foodservice operators.
•
•
•
•
•
•
•
oo
Hot Cereals
Rice, Pasta and Potatoes
Soup, Sauces and Gravy
Hot Beverages
ANSI /NSF 4
Model AWD-12

ITEM#
SPECIFICATIONS
OPTIONS (NOT FOR RETROFIT)
❑NEMA L6-30P
Model Volts Watts Amps Shipping Weight
AWD-12 208 5000 24.0 80 lbs. (36 kg)
240 5000 20.8 80 lbs. (36 kg)
DIMENSIONS
133/8"W x 271/2"D x 281/8"H (34 x 70 x 71 cm)
with 4" (10 cm) legs.
VOLTAGE
208 or 240 volts, 50/60 Hz, single phase (use NEMA 6-30P).
CORD LOCATION
Lower left side.
PLUG CONFIGURATIONS
ATMOSPHERIC HOT WATER DISPENSER
Model AWD-12
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • [phone] • [phone]
Fax [phone] • Int’l. Fax [phone] • Web Site: www.hatcocorp.com • E-mail: [email protected]
Form No. AWD-1502(S) Printed in U.S.A.
NEMA L6-30PNEMA 6-30P
FRONT VIEW
SIDE VIEW
231⁄2" (60 cm)
8" (20 cm)
4"
(10 cm)
Water Inlet
(1⁄4" Male Flare Connection)
Outlet for Manual Drain
(Standard 3⁄4" Hose Connection)
117⁄8" (30 cm)
11⁄2"
(4 cm)
4" (10 cm)
241⁄8"
(61 cm)
Cord Location
WATER FILL
Cord Location
Manual
Drain Lever
ACCESSORIES
❑3' (1 m) Rubber Drain Hose with 10' (3 m) ¼" Inlet Tubing
❑Phosphate Injection System
ARCHITECT SPECS
Water Dispenser
The Atmospheric Water Dispenser to supply water ranging
from 75º–200ºF (24º–93ºC) shall be a Hatco Model ....as
manufactured for commercial use by the Hatco Corporation,
Milwaukee, WI 53234 U.S.A.
The Water Dispenser shall have the capacity to heat 12 gph
(45.4 lph) from 35º to 200ºF (2º to 93ºC) and it shall be rated at
....volts, ....watts.
The dispenser shall be complete with a stainless steel tank and
all internal plumbing, including a 1⁄4" male flare connection on
the inlet and a 3⁄4" hose connection on the drain. All controls
shall be built-in, including contactor.
WATER TEMPERATURE RECOVERY
Dispensing Temperature of 200ºF (93ºC)
12 gph (45 lph) with 35ºF (2ºC) incoming water
35 gph (125 lph) with 140ºF (60ºC) incoming water
gph = (kW x 400)/(ºF Temperature Rise)
lph = (kW x 841)/(ºC Temperature Rise)
The heater shall be equipped with an electronic temperature
controller, an on-off switch, a digital temperature display and
preset dispensing push-buttons including manual dispense.
Electric heating elements shall be metal sheathed, controlled
by a submersed thermistor. The Water Dispenser shall be
protected with high-temperature limit and low water cut-off.
The unit may be emptied easily by a convenient bottom drain.
The dispenser shall consist of a stainless steel base, front
cover, front control housing and a painted white granite body
with standard 4" (10 cm) legs and 6' (2 m) cord and plug.