Hatco ATMOSPHERIC AWD-12 Series User manual

ITEM#
HATC C RP RATI N P. . Box 340500 Milwaukee, WI 53234-0500 U.S.A.
[phone] • [phone] • Fax [phone] • Int’l. Fax [phone]
www.hatcocorp.com • E-mail: [e-mail]
Form No. AWD Spec Sheet
rinted in U.S.A.
April 2012
ATMOSPHERICHT WATER DISPENSER
Model AWD-12
At the simple push of a button, the Hatco®
Atmospheric Water Dispenser delivers
pre-measured quantities of hot water
for food preparation or cleaning.
FLEXIBILITY
The Atmospheric Hot Water Dispenser
quickly provides 2, 3, or 4 quarts
(1.9, 2.8, or 3.8 liters) of hot water,
up to 195°F (91°C), for fast, easy food
preparation like hot beverages, sauces,
soups, gravy, hot cereals, rice, pasta,
potatoes, gelatins, and other applications.
The program can be interrupted for
versatility and convenience. A manual
dispense button permits additional water
volume options. The 12-gallon (45 liter)
stainless steel tank provides up to
8 gallons (30 liters) of continuous hot
water and the removable stainless steel
shelf allows access to dispense water into
large containers.
Compact and durable, this dispenser
requires minimal counter space. The tank
can be emptied easily with convenient
bottom drain.
QUALITY
The following features assure the finest
performance for years to come:
• Quickly delivers 2, 3, or 4 quarts
(1.9, 2.8, or 3.8 liters) of hot water with
a touch of a button for fast, easy
food preparation.
• rogram can be interrupted for versatility
and convenience.
• Manual dispense button permits additional
water volume options.
• Compact and durable unit requires minimal
counter space.
• 12-gallon (45 liter) stainless steel tank
provides up to 8 gallons (30 liters) of
continuous hot water.
• Removable shelf allows access to dispense
water into large containers.
• Tank is emptied easily with convenient
bottom drain.
• Setpoint temperature can be adjusted from
75°F up to 195°F (24°-91°C), with the factory
default setting at 195°F (91°C).
Model AWD-12

ITEM#
HATC C RP RATI N P. . Box 340500 Milwaukee, WI 53234-0500 U.S.A. • [phone] • [phone]
Fax [phone] • Int’l. Fax [phone] • www.hatcocorp.com • E-mail: [e-mail]
Form No. AWD Spec Sheet
ATMOSPHERICH T WATER DISPENSER
Model AWD-12
SPECIFICATI NS
PTI NS (N T F R RETR FIT)
KNEMA L6-30 Locking Cap in lieu of NEMA 6-30
Model Volts Watts Amps Shipping Weight
AWD-12 208 5000 24.0 80 lbs. (36 kg)
240 5000 20.8 80 lbs. (36 kg)
DIMENSI NS
13.36"W x 27.47"D x 28.06"H (339 x 698 x 713 mm)
with 4" (102 mm) legs.
V LTAGE
208 or 240 volts, 50/60 Hz, single phase (use NEMA 6-30 ).
C RD L CATI N
Lower left side.
PLUG C NFIGURATI NS
NEMA L6-30NEMA 6-30
FRONT VIEW
SIDE VIEW
23.5" (597 mm)
8"
(203 mm)
3.98"
(101 mm)
Water Inlet
(1⁄4"Male Flare
Connection)
Outlet for Manual Drain
(Standard 3⁄4"Hose Connection)
11.89"
(302 mm)
1.47"
(38 mm)
4"
(102 mm)
Cord Location
27.47" (698 mm)
Cord Location
Manual
Drain Lever
24.06"
(611 mm)
28.06"
(713 mm)
11.78"
(299 mm)
8.13"
(207 mm)
13.36" (339 mm)
ACCESS RIES
KWater Filtration System Cartridge, for remium Quality Water
(Recommended filter change every 15,000 gallons) (Incoming water
must be 100ºF (37ºC) or less)
K3' (914 mm) Rubber Drain Hose with 10' (3048 mm) 1/4" Inlet Tubing
PR DUCT SPECS
Water Dispenser
The Atmospheric Water Dispenser to supply water ranging from
75º–195ºF (24º–91ºC) shall be a Hatco Model ... as manufactured for
commercial use by the Hatco Corporation, Milwaukee, WI 53234 U.S.A.
The Water Dispenser shall have the capacity to heat 12 gph (45 lph)
from 35ºto 195ºF (2ºto 91ºC) and it shall be rated at ... volts, ... watts.
With 24/7 parts and service assistance (US and Canada only), the
dispenser shall be complete with a stainless steel tank and all internal
plumbing, including a 1/4" male flare connection on the inlet and
a3/4" hose connection on the drain. All controls shall be built-in,
including contactor.
WATER TEMPERATURE REC VERY
Dispensing Temperature of 195ºF (91ºC)
12 gph (45 lph) with 35ºF (2ºC) incoming water
33 gph (125 lph) with 140ºF (60ºC) incoming water
gph = (kW x 400)/(ºF Temperature Rise)
lph = (kW x 841)/(ºC Temperature Rise)
The heater shall be equipped with an electronic temperature controller,
an on-off switch, a digital temperature display, and preset dispensing
push-buttons including manual dispense. Electric heating elements shall
be metal sheathed, controlled by a submersed thermistor. The Water
Dispenser shall be protected with high-temperature limit and low-water
cut-off. The unit may be emptied easily by a convenient bottom drain.
The dispenser shall consist of a stainless steel tank, front cover, front
control housing, and a painted white granite body with standard
4" (102 mm) legs and 6' (1829 mm) cord and plug.
rinted in U.S.A.
April 2012
WATER QUALITY REQUIREMENTS
Incoming water in excess of 3.0 grains of hardness per gallon (G G) (.75 grains of
hardness per liter) must be treated and softened before being supplied to hot water
dispenser(s). Water containing over 3.0 G G (.75 G L) will decrease the efficiency
and reduce the operating life of the unit.
Note: Product failure caused by liming or sediment buildup is not covered
under warranty.