Hathaway MONTECITO NG5021 User manual

MONTECITO 8' POOL TABLE
ASSEMBLY INSTRUCTIONS
NG5021
Please Do Not Hesitate to
Contact Our Consumer Hotline
at 800-759-0977
with Any Questions That May
Arise During Assembly or
Use of This Product!
Ver. 0618

THANK YOU!
Thank you for purchasing this product. We work around the clock and around the globe to ensure
that our products maintain the highest possible quality. However, in the rare case of issues during
assembly or use of this product, please contact our Consumer Hotline at 800-759-0977 for immediate
assistance before contacting your retailer. Please read the warranty information at the back of these
assembly instructions for further details.
2
CARE AND USE
1. This product is intended for INDOOR use only.
2. Do NOT drag the table when moving it, as this will damage the legs.
ASSEMBLY TIPS
1. Find a clean, level surface to begin the assembly of your game table. We recommend that two adults
work together to assemble this game. You may want to carefully cut or tear the four corners of the box
so that the bottom of the box can be used as your work surface.
2. Remove all of the contents from box and verify that you have all of the parts shown on the Parts
List before you begin assembly. Note: Some parts may be pre-installed or pre-assembled.
3. Some figures or drawings may not look exactly like product.
4. When installing parts that have more than one screw or bolt, hand tighten all screws or bolts
in place before final tightening with screwdriver or wrench.
5. Electric screwdrivers may be helpful during assembly; however, please set a low torque and use
extreme caution because screws may be stripped or overtightened, resulting in damaged parts, if the
electric screwdriver’s torque is set too high.
WARNINGS!
READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETYINSTRUCTIONS CAREFULLY.
CHOKE HAZARD - THIS ITEM MAY CONTAIN SMALL BALLS AND PARTS
NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.
IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS
IN ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.

3
Parts List
6/18
MONTECITO 8' POOL TABLE - NG5021
Illustrations Not to Scale
PARTS
P1 NGP7297 P2 NGP7298 P3 NGP7299 P4
TABLE BODY PEDESTAL STRETCHER
A1 NGP2192 A2 NGP2193 A3 NGP2194
HARDWARE PACK - NGP7301*
H1*
FOOT
A4 NGP2195 A5 NGP5077 A6 NGP5136 A7 NGP5135
H2* H3* H4* H10
CUE STICK BRIDGE STICK RAIL BRUSH
BRIDGE HEAD CUE CHALK TRIANGLEBILLIARD BALL SET
NGP2199
Pre-installed X4
5/16” PHILLIPS
HEAD BOLT
5/16” SPRING
WASHER 5/16” FLAT WASHER WRENCH LEG LEVELER
X1 X2 X2 X1
X2 X1 X1 X1 X2 X1 X1
X20 X24 X24 X1
NGP7300
P1
P4
P3
P2
For replacement parts please call 800-759-0977.
P5
PEDESATAL PANEL
X2
NGP7388
H5* H6*
X4 X4
WOOD SCREW 5/16” PHILLIPS
HEAD BOLT (L)

4
THANK YOU!ASSEMBLY INSTRUCTIONS
STEP 1
STEP 3
P1
P2
P5
H1
H2
H3
H1
H2
H3
H4
H5
H5
H5
H1
H2
H3
P5
P2
P5
H1
H2
H3
H4
STEP 2
Remove Bolts (H1) to remove Pedestal Panels (P5)
from Table Body (P1), which will be replaced in Step 3,
after attaching to Pedestals (P2) in Step 2.
P5
P5
P1
H1
H2
H3
H4
H5
H1
H2
H3

5
THANK YOU!ASSEMBLY INSTRUCTIONS (CONT.)
STEP 5
STEP 4
Pre-installed
Wooden Dowel
Pre-installed
Wooden Dowel
H10
Pre-installed
H6
H2
H3
P2
P1
P5
P4
P3
P3
H4 H1
H2 H3
Pre-installed
Wooden Dowel
Pre-installed
Wooden Dowel
H6
H2
H3

6
180-DAY LIMITED WARRANTY
This product is warranted to the original purchaser to be free from defects in material or workmanship
for a period of 180 days from the date of the original retail purchase.
This warranty does not cover defects or damage due to improper installation, alteration, accident or
any other event beyond the control of the manufacturer. Defects or damage resulting from misuse,
abuse or negligence will void this warranty. This warranty does not cover scratching or damage that
may result from normal usage.
This product is not intended for institutional or commercial use; the manufacturer does not assume
any liability for such use. Institutional or commercial use will void this warranty.
This warranty is nontransferable and is expressly limited to the repair or replacement of the defective
product. During the warranty period, the manufacturer shall repair or replace defective parts at no
cost tothe purchaser. Shipping charges and insurance are not covered and are the responsibility of
the purchaser. Labor charges and related expenses for removal, installation or replacement of the
product or components are not covered under this warranty.
The manufacturer reserves the right to make substitutions to warranty claims if parts are unavailable
or obsolete.
The manufacturer shall not be liable for loss of use of the product or other consequential or incidental
costs, expenses or damages incurred by the consumer of any other use. The user assumes all risk of
injury resulting from the use of this product.
This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of
. Neither the manufac-
turer nor any of its representatives assumes any other liability in connection with this product.
All warranty claims must be made through the retailer where the product was originally
purchased. A purchase receipt or other proof of date of purchase will be required to process
all warranty claims. The model number and part numbers found within the assembly
instructions will be required when submitting any parts requests or warranty claims.
For further warranty information or inquiries, please call 800-759-0977

TABLE DE BILLARD
MONTECITO 2,43 m
INSTRUCTIONS D’ASSEMBLAGE
NG5021
Ver. 0618
Contactez notre
service à la clientèle au
800-759-0977
avec des questions sur le montage
ou l'utilisation de ce produit.

2
MERCI!
Merci d’avoir acheté notre produit. Nous travaillons 24 heures sur 24, partout dans le monde, à garantir
que nos produits sont de la meilleure qualité possible. Toutefois, dans les rares cas de problèmes lors
du montage ou de l'utilisation de ce produit, se il vous plaît communiquer avec notre service à la clientèle
au 800-759-0977 pour une aide immédiate avant de contacter votre revendeur. Pour obtenir de plus amples
renseignements, veuillez lire l'information relative à la garantie au verso de ce guide d’instructions.
ENTRETIEN ET USAGE
1. Ce produit doit être utilisé À L’INTÉRIEUR seulement.
2. NE JAMAIS déplacer la table en la traînant, cela pourrait endommager les pieds.
INSTRUCTIONS D’ASSEMBLAGE
1. Trouver une surface propre et plane, pour commencer le montage de votre table de jeu. La table
s’assemble à l’envers pour être ensuite retournée sur ses pieds, une fois l’assemblage complété.
Cette table est lourde et nécessite au moins deux adultes forts pour la soulever et la retourner.
2. Retirez le contenu de la boîte, avant de commencer l’assemblage, assurez-vous d’avoir toutes
les pièces telles que listées et illustrées au tableau d’identification. Avis : certaines pièces sont
préassemblées ou préinstallées.
3. Certaines illustrations ou dessins peuvent ne pas ressembler au produit que vous avez acheté.
4. Quand vous fixez en place une pièce avec plus d’une vis ou écrou, veuillez, en premier, les
visser à la main et terminer la fixation avec un tournevis ou une clé.
5. Un tournevis électrique peut être utile lors de l’assemblage, mais veuillez le régler à basse torque
et l’utiliser avec prudence; si la torque est trop élevée, la vis peut se défaire ou être trop serrée.
AVERTISSEMENTS!
LIRE TOUTES LES INSTRUCTIONS D’ASSEMBLAGE ET LES CONSIGNES DE SÉCURITÉ ATTENTIVEMENT.
RISQUE D’ÉTOUFFEMENT – CERTAINS ÉLÉMENTS DU PRODUIT CONTIENNENT
DE PETITES PIÈCES - NE CONVIENT PAS À UN ENFANT DE MOINS DE TROIS ANS.
IMPORTANT! VEUILLEZ LIRE, EN ENTIER, TOUTES LES
INSTRUCTIONS AVANT D’ASSEMBLER VOTRE PRODUIT.

3
liste des pièces
6/18
TABLE DE BILLARD MONTECITO 2,43 m - NG5021
Iillustrations non à l'échelle
CAISSON PIEDESTAL CHÂSSIS PIED
CUE BÂTON PONT BROSSE
TÊTE DE PONT CUE CRAIE TRIANGLE
BOULES DE BILLARD
pré installé X4
BOULON À
TÊTE PHILLIPS 8mm
RONDELLE
FENDUE 8 mm
RONDELLE
PLATE 8 mm CLÉ PIED NIVELEUR
P1 NGP7297 P2 NGP7298 P3 NGP7299 P4
A1 NGP2192 A2 NGP2193 A3 NGP2194
H1*
A4 NGP2195 A5 NGP5077 A6 NGP5136 A7 NGP5135
H2* H3* H4* H10 NGP2199
X1 X2 X2 X1
X2 X1 X1 X1 X2 X1 X1
X20 X24 X24 X1
NGP7300
P1
P4
P3
P2
P5
PANNEAU DE
PIÉDESTAL
X2
NGP7388
H5* H6*
X4 X4
VIS À BOIS BOULON À
TÊTE PHILLIPS 8mm
Sac de quincaillerie - NGP7301*
PIÈCES
Pour commander une pièce de remplacement, veuillez téléphoner au 1 800 759-0977

4
THANK YOU!INSTRUCTIONS D’ASSEMBLAGE
étape 1
étape 3
P1
P2
P5
H1
H2
H3
H1
H2
H3
H4
H5
H5
H5
H1
H2
H3
P5
P2
P5
H1
H2
H3
H4
étape 2
Retirer les boulons (H1) pour retirer les panneaux
de piédestal (P5) à caisson de la table (P1), qui sera
remplacé à l'étape 3, after après fixation sur les
piédestaux (P2) à l'étape 2.
P5
P5
P1
H1
H2
H3
H4
H5
H1
H2
H3