Havis-Shields 1996-2008 Crown Victoria Driver and Passenger - Trunk Side Mounts... User manual

NEW
Call Today for Quick Delivery 1-800-524-9900 or visit www.havis.com
Manufactured by:
C-TSM-CHGR^CV_NPR_11-07
Trunk Side
Mounts
Part Number Description
C-TSM-CHGR-D Trunk Side Mount ‘06-08 Dodge Charger (Driver Side)
C-TSM-CHGR-P Trunk Side Mount ‘06-08 Dodge Charger (Passenger Side)
C-TSM-CV-P Trunk Side Mount ‘98-08 Ford Crown Victoria (Passenger Side)
Safely store important electronics while keeping them easy to service!
• Available for Dodge Charger and Ford Crown Victoria
• Locking Latch: Locking latch ensures your equipment is protected when mount is in closed position.
• Hinged Platform: Fold down makes it easy to service your equipment.
• Easy to Install: Mounts on fender side of trunk and comes with a removable inner panel for easy bench top pre-assembly.
• Mounting Area: Charger mounting surface is 12” wide x 15” high. Crown Vic mounting surface is 12.5” wide x 14.5” high
• Passenger side mounts for Charger are recommended as battery is nearby and full size spare is offset on drivers side.
Driver side for Crown Vic not available due to location of fuel shut-off switch.
New Trunk Side Mounts from Havis-Shields!
Locking latch provides a safe and
secure mounting area. (C-TSM-CHGR-D
shown)
Safely mount important equipment: Havis-Shields fold-down trunk side mounts allows
important electronic devices to be safely mounted in a secure area. (C-TSM-CHGR-P shown)
Manufactured from strong 14-gauge
black-powder coated steel. (C-TSM-
CV-P shown)
See Havis-Shields Trunk Mounted Radio Trays for additional solutions.
(C-3190^3311_NPR)