Havis-Shields C-TCB-27 User manual

C-TCB-27-INST-3-07
INSTALL INSTRUCTIONS C-TCB-27
DODGE RAM 1500 PICK-UP 2002-2007
DODGE RAM 2500 & 3500 PICK-UP 2003-2007
TOOLS REQUIRED:
3/16” Allen wrench
3/8” Standard Socket Set
3/8” Metric Socket Set
3/8” Ratcheting Wrench
Powered drill w/ 3/16” drill bit
Open-end wrench set
HARDWARE:
QTY DESCRIPTION PART #
1 Pole support assembly CM93071-27W
1 Telescoping pole assembly CM93072-3
1 Lag bolt ¼ x 1 GSM33060
Always!
 Read all instructions before installing any Havis-Shields Equipment Corp products.
 Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
 Use hardware provided with install kit
SUB ASSEMBLY:
1. Confirm receipt of all hardware and components.
2. Remove front inner and outer passenger seat bolts on
vehicle.
INSTALLATION:
1. MOUNT C-TCB-27 INTO VEHICLE:
• Position pole support assembly on top of
passenger seat base mount and align holes in
pole support assembly with holes in seat base.
• Loosely attached factory seat bolts that were
removed during sub assembly.
• Tighten down factory passenger seat bolts and
5/16-18-nylock nut holding side support brace
to pole support assembly.
• Mount optional C-3090, computer-mounting
platform, to telescoping pole assembly using
hardware and instructions provided with
C-3090.
Telescoping pole
assembly
Pole support
assembly
Location of
passenger side factory
seat base bolts