Hawking HWDN3 User manual

HWDN3
START HERE 
QUICK INSTALLATION GUIDE
Hi-GainTM USB Wireless-300N Dish Adapter
Mac OS X Windows XP Windows 7 & Vista

OVERVIEW
Check Package Contents
- Hi-Gain USB Wireless-300N Dish Adapter
- USB Cable
- CD: User Manual and Drivers (Mac & PC))
Contents
- Windows 7 & Vista Installation page 2
- Windows XP Installation page 9
- Mac OS X Installation page 15
This document only contains quick setup instructions. For more
settings, please refer to the User’s Manual located on the CD.
Support is available via website, email, and telephone:
Website: www.hawkingtech.com/support
E-mail: [email protected]
Tel (Toll Free US & Canada): 888-202-3344
Tel (International): 949-206-6900

Windows 7 & Vista
IMPORTANT! Do not connect the HWDN3 until you install the driver
from the CD and are instructed to do so. Otherwise, the adapter
may not operate properly.
1. Insert the Setup CD and a menu page will automatically appear
on your screen. To begin installation click “Driver & Utility
Setup”.
2. Wait for the setup to complete.
Installation Instructions for Windows 7 & Vista

Windows 7 & Vista
3. Click “Next” to begin installation.
4. When the installation is complete you may be prompted to
restart your computer.

Windows 7 & Vista
6. For Windows 7 it is recommended to use the default Windows
network utility. To connect, click on the network icon in the
lower right corner of your desktop. Choose a network and
click “Connect”. If your network is password protected you will
be prompted to enter your password. Contact your network
administrator if you do not know your password.
5. After the restart, plug in your HWDN3, with the USB cable.

Windows 7 & Vista

Windows XP
Installation Instructions for Windows XP
Important: Do Not connect the Network Adapter into the USB port
until you have installed the driver from the CD and are instructed to
do so. Otherwise, the Adapter may not operate correctly.
1. Insert the Setup CD and a menu page will automatically appear
on your screen. To begin installation click “Driver & Utility
Setup”.
2 Wait for the setup to complete.

Windows XP
3. Click “Next” and wait while the Wizard installs the HWDN3
Driver & Utiliy.
4. When the installation is complete you may be prompted to
restart your computer.

Windows XP
6. For Windows XP it is recommended to use the HWDN3 Network
Utility. To start the Network Utility click on the wireless icon in the
lower right corner of your desktop.
5. After the restart, plug in your HWDN3, with the USB cable.
7. Once the Network Utility has started you should see the follow-
ing screen. Click on the “Available Network” tab. Select your wire-
less network and click “Add to Profile”.