hayneedle Belham Living Rowan Tub Rocking Chair... User manual

For assistance with assembly, please contact customer Care Center
1-888-880-4884
ITEM NAME: Belham Living Rowan Tub Rocking Chair
SKU: REDU071-1
1/4

PRE-ASSEMBLY PREPARATION:
•Please read through this instruction before beginning assembly.
•Two adults for assembly is recommended.
•Clear out the space for assembly and lay out all parts base on Parts List. Extra room will
allow you to easily determine if all the pieces are present.
•Save all packing materials until assembly is complete to avoid accidentally discarding
smaller parts or hardware.
•Keep small parts and pieces away from children until fully assembly.
•Please check for any loose screws and tighten them before you use.
PANEL AND FITTINGS IDENTIFICATION:
HARDWARE LIST:
PANEL AND FITTINGS IDENTIFICATION:
Seat cushion (1) Qty:1
Right side frame (2) Qty:1
Left side frame (3) Qty:1
Seat frame(4) Qty:1
540mm
690mm
660mm
540mm
690mm
870mm
600mm
660mm
680mm
640mm
2/4
870mm
600mm
PRE-ASSEMBLY PREPARATION:
DO NOT LET CHILDREN PLAY IN OR AROUND THE UNIT DUE TO THE POSSIBLE RISK
OF FINGER ENTRAPMENT
!

STEP-BY-STEP ASSEMBLY:
2/4
HARDWARE LIST : Scaled to Actual Size
bolt (A) Qty:10
Flat Washer (B) Qty:4
Flat Washer (C) Qty:6
Spring Washer (D) Qty:10
Allen Key (E) Qty:1
Wood plug (F) Qty:6
38mm
12mm
11mm
70mm
14mm
STEP 1: Connect the Seat frame (4),the right and left Side frame (2 & 3) using a Bolt (A), Spring
washer (D) and Flat washer (C) with the Allen key ( E),Clockwise.
1
16mm
To ensure an easier assembly,
we strongly advise that all
fittings are only finger tightened
during initial assembly.
Only upon completion of the assembly
should all fixing points be
fully tightened.
3/4
2
3
4
EADC

2STEP 2: Attach the seat cushion (1) in the right and left side frame (2 & 3). Using a bolt
(A), spring washer (D), flat washer (C), allen key (E). Then cover exposed holes with
wood plugs (F).
3STEP 3: Attach Seat cushion (1) to the seat frame (4) using a bolt (A), spring
washer (D), flat washer (B) with the allen key (E). Then level the chair and
tighten all bolts securely.
MAINTENANCE AND CARE TIPS
MAINTENACE AND C
- Check and re-tighten screws/bolts after the product has been used for a period of time.
- Dust with a soft cloth moistened with a polish as the polish will help eliminate the scratching that
occurs with dry dusting.
- Soap and water are not advisable for wood surfaces.
- It is best to keep your furniture in a climate controlled environment. Extreme temperature and
humidity changes can cause warping, shrinking, and spitting of wood. It is advised to keep furniture
away from direct sunlight as it may damage the finish.
-Do not stand on the unit as it with a soft surface to load the weight of body.
1
4
E
B
D
A
4/4
DAE
C
2
3
1
4