HDL SB-CMS-PIR User manual

HDL-BUS PRO Installation Manual for SB-CMS-PIR www.smarttouch.co.nz
001
Installation Requirements
Installation Dimensions
Description
Working Temperature: -5°~45°
Operating Relative Humidity: 20%~90%
Storage Temperature: -40°~+55°
Storage Relative Humidity: 10%~93%
Protection Grade ： 2.0
Environmental Conditions
• Can control based on detecting motion or
lack of motion. Maximum 99 targets
• Master-slave mode selectable
• Security supported
Features
• Input Voltage : DC 12-30 V
• Input Current : 15mA/DC 24V
• Installation : Ceiling or Wall mount
• Sensitivity setting range : 20 ～ 80
• The maximum detection angle: 110°
• Maximum detection range (Radius: 4.8m,
height 3.4m
• Exterior Size ： 80mm×80mm×32mm
Performance Parameters
The SB-CMS-PIR is a Ceiling Mount Infrared
Motion Sensor.
Incorporates: PIR moon sensing funcon
• Interior installation and ambient temperature is below 35 degrees Celsius, high temperature
environments will lower sensitivity
• Do not install near air-conditioning vents, temperature changes may cause malfunction
• Do not install near strong electromagnetic interference, strong electromagnetic interference may
cause malfunction
• Accessories: Each sensor is supplied with an adjustable plastic bracket, to shield part of the sensing
area if necessary
• Bus connection: CAT-5 UTP
80
Elevation Side View
Coping
Fresnel Lens
Wiring Track
32
Back View
Slot
Bottom Shell
Wedge
Airway
Screw Hole
44.5
Wiring hole, Use
a screwdriver or
other tools to
carefully break
out opening.

HDL-BUS PRO Installation Manual for SB-CMS-PIR www.smarttouch.co.nz
4 5 BUS Connector,
DC24V、4 5+、4 5-、COM
002
Wiring for installation
• Read all instructions in detail before use
• Ensure mounted equipment is well ventilated
• Install in location that is free of moisture, vibration and dust
• Do not allow contact with water or other liquids or corrosive gases
• Contact authorised maintenance staff should this product require service
Safety and Maintenance
Packing list
System Connection Diagram
• SB-CMS-PIR 1 PC
• Installation Manual 1 PC
• Fresnel lens bracket
Brown, White & Orange, White COM
Blue, White & Green, White
DATA-
Blue & green DATA+
Brown & Orange DC24V
Smart-Bus CAT5 Wire Definition
Interior Structure
Recommended Connection: Daisy Chain
Device1 Device2 Device3 Device4 Device5
HDL-BUS
Power
MBUS01IP Relay PIR Sensor
PANEL
PC
RJ45
M
A
X
3.4
M
110
○
r
Detecting Range r：4. M
Motion Detecting Range and Recommended Height