HEALTH RIDER E 530 User manual

CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Model No. HREL07980
Serial No.
Serial Number Decal
USERÕS MANUAL
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satisfac-
tion through direct assistance
from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
¨
Visit our website at
www.healthrider.com
new products, prizes,
fitness tips, and much more!

¨
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO USE THE ELLIPTICAL CROSSTRAINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
2

3
1. Read all instructions in this manual before
using the elliptical crosstrainer.
2. It is the responsibility of the owner to ensure
that all users are adequately informed of all
precautions.
3. Place the elliptical crosstrainer on a level
surface, with a mat beneath it to protect the
floor or carpet. Keep the elliptical crosstrain-
er indoors, away from moisture and dust.
4. Inspect and tighten all parts regularly.
Replace any worn parts immediately.
5. Keep children under age 12 and pets away
from the elliptical crosstrainer at all times.
6. Always hold the handlebar or the upper
body arms when mounting, dismounting, or
using the elliptical crosstrainer.
7. Wear appropriate exercise clothing when
using the elliptical crosstrainer. Always wear
athletic shoes for foot protection.
8. The elliptical crosstrainer should not be used
by persons weighing more than 250 pounds.
9. The pulse sensor is not a medical device.
Various factors, including the userÕs move-
ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
10. When you stop exercising, allow the pedals
to slowly come to a stop.
11. Keep your back straight when using the ellip-
tical crosstrainer. Do not arch your back.
12. If you feel pain or dizziness while exercis-
ing, stop immediately.
13. The elliptical crosstrainer is intended for in-
home use only. Do not use it in any commer-
cial, rental, or institutional setting.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read the following important precau-
tions before using the elliptical crosstrainer.

4
BEFORE YOU BEGIN
Congratulations for selecting the new HealthRider¨
E530 elliptical crosstrainer. The HealthRider¨E530 is
an incredibly smooth exerciser that moves your feet in
a natural elliptical path, minimizing the impact on your
knees and ankles. And the unique E530 features
adjustable resistance and incline to help you get the
most from your exercise. Welcome to a whole new
world of natural, elliptical-motion exercise from
HealthRider.
For your benefit, read this manual carefully before
you use the HealthRider¨E530. If you have addition-
al questions, please call our Customer Service
Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time
(excluding holidays). To help us assist you, please
note the product model number and serial number
before calling. The model number is HREL07980. The
serial number can be found on a decal attached to the
HealthRider¨E530 (see the front cover of this manual
for the location of the decal).
Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labeled.
Upper Body Arm
Handlebar with Pulse Sensor
FRONT
BACK RIGHT SIDE
Pedal Arm
Pedal Disk
Pedal
Console
Book
Rack
Incline Bracket
Incline Frame

26
2
1
5
26
5
ASSEMBLY
Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
The following tools (not included) are required for assembly: a phillips screwdriver , an
adjustable wrench , and a rubber mallet .
1. Lay a cloth over the front of the Frame (1) to protect it.
Lay the Upright (2) in the position shown. Connect the
Extension Wire (51) to the Wire Harness (57).
2. Align the two holes in the front of the Upright (2) with
the two welded bolts on the front of the Frame (1).
Carefully push the Wire Harness (not shown) into the
Upright until there is no slack.
Next, pivot the Upright (2) about halfway to the vertical
position while guiding the Wire Harness (not shown)
into the Upright. Pivot the Upright to the vertical posi-
tion so it rests on the four welded bolts on the Frame
(1). Be careful to avoid pinching the wires.
Lift the front of the Incline Frame (5). Tighten a 3/8Ó
Nylon Locknut (26) onto each welded bolt.
2
2
1
51
57
3
1
3. Attach the Console (87) to the Console Base (49) with
four Zinc #8 x 1/2Ó Screws (35), making sure that the
indicated wires are extending from the Console Base
(49). Be careful not to pinch the wires.
35
Wires
87
49

6
7. Make sure that all parts of the elliptical crosstrainer are properly tightened. Note: There may be some
hardware left over after assembly is completed. To protect the floor or carpet from damage, place a mat
under the elliptical crosstrainer.
5. Refer to the inset drawing. Apply a small amount of the
included lubricant to a paper towel; rub a thin film of
lubricant onto the Chrome Extension Tube (21) on the
Right Pedal Arm (4). Slide the Chrome Extension Tube
into one of the Upper Body Arms (7).
Slide the other Chrome Extension Tube (21) into the
other Upper Body Arm (7) in the same way.
Tap a 5/8Ó Axle Cap (85) onto one end of the Axle (19).
Insert the Axle through one of the Upper Body Arms
(7) and then through the Upright (2). It may be helpful
to tap the Axle with a rubber mallet. Slide the other
Upper Body Arm (7) onto the Axle. Make sure that the
Upper Body Arms are turned as shown. Tap another
5/8Ó Axle Cap (85) onto the Axle.
4. Connect the Extension Wire (51) to the corresponding
wire on the Console (87).
Next, connect the two Pulse Wires (86) to the two
remaining wires on the Console (87). Note: Either
Pulse Wire can be attached to either wire on the
Console.
Next, connect the ground wire to the indicated hole in
the Upright (2) with a Zinc #8 x 1/2Ó Screw (35) and
the #8 Star Washer (53).
Carefully feed the wires down into the Upright (2).
Attach the Console Base (49) to the Upright with four
Zinc #8 x 1/2Ó Screws (35). Be careful to avoid
pinching the wires.
86
87
49
35
35
2
57
Console
Wires
35
53
Ground Wire
4
5
19
2
85 7
7
85
21
Lube
4
7
6. Plug the Power Supply (96) into the jack at the rear of
the elliptical crosstrainer. Note: Your Power Supply
may look different from the one pictured.
6
Jack
96

7
HOW TO USE THE ELLIPTICAL CROSSTRAINER
HOW TO PLUG IN THE POWER SUPPLY
Make sure that the power supply is plugged into the
elliptical crosstrainer (see step 6 on page 6). Next,
plug the power supply into an electrical outlet.
EXERCISING ON THE ELLIPTICAL CROSSTRAINER
To mount the elliptical crosstrainer, hold the handlebar
and step onto the pedal that is in the lowest position.
Next, step onto the other pedal. Push the pedals until
they begin to move with a continuous motion. Note:
The pedal disks can turn in either direction. It is
recommended that you move the pedal disks in
the direction shown below; however, to give vari-
ety to your exercise, you may choose to turn the
pedal disks in the opposite direction.
To dismount the elliptical crosstrainer, wait until the
pedals come to a complete stop. CAUTION: The
elliptical crosstrainer does not have a freewheel;
the pedals will continue to move until the flywheel
stops. When the pedals are stationary, step off the
highest pedal first. Then, step off the lowest pedal.
USING THE UPPER BODY ARMS
The upper body arms are designed to give you a total
body workout. As you exercise, hold the upper body
arms and move your arms forward and back in order
to work your arms, back, and shoulders.
If you want to exercise only your lower body, hold the
handlebar as you exercise.
INCLINE ADJUSTMENT
The incline frame can be raised or lowered to vary the
intensity of your exercise. To raise the incline frame,
lift the end of the incline frame until the crossbar is on
top of the incline bracket. Make sure that the incline
frame is resting securely upon the incline bracket.
To lower the incline frame, first lift the incline frame
slightly. Next, push the incline bracket toward the
upright and lower the incline frame onto the stabilizer.
Pedal
Pedal Disk
Upper
Body
Arms
Incline
Frame
Incline
Bracket
Stabilizer
Crossbar
Upright
Handlebar

8
CONSOLE DIAGRAM
Note: If there is a thin sheet of clear plastic on the
face of the console, remove it.
A. Program ProfilesÑThese profiles show how the
resistance of the elliptical crosstrainer will change
during resistance programs. During the first pro-
gram, for example, the resistance will gradually
increase during the first half of the program, and
then gradually decrease during the last half.
B. MANUAL CONTROL IndicatorÑThis indicator will
light to show when the manual mode is selected.
C. Program IndicatorsÑThese indicators light when a
resistance program is selected.
D. LED MatrixÑWhen the manual mode is selected,
the LED matrix will show your progress on an LED
track. When a resistance program is selected, the
matrix will show your progress and upcoming resis-
tance settings.
E. TIME/DISTANCE/RESISTANCE/LAPS DisplayÑ
This display shows the elapsed time (or the remain-
ing time in a resistance program), total distance,
the resistance level, and the number of 1/4-mile
laps you have completed. The display will change
modes every five seconds. Note: The number of
laps will be displayed only when the manual mode
is selected. The letter ÒLÓ will appear in the display
when the number of laps is shown.
F. SPEED/CALORIES/PULSE DisplayÑ This display
shows your current speed and the approximate
number of calories you have burned. The display
will change modes every five seconds. When the
pulse sensor is used, the display will also show
your heart rate.
G. PROGRAM SELECT ButtonÑThis button is used
to select the manual mode and the resistance pro-
grams.
H. RESISTANCE ButtonsÑThese buttons control the
resistance of the elliptical crosstrainer. There are
ten resistance levels.
I. START/PAUSE ButtonÑThis button is used to start
and pause the console.
J. RESISTANCE DisplayÑThis display shows the
resistance level of the elliptical crosstrainer.
B
C
E
H
F
A
GI
A
J
D

9
Turn on the power
Make sure that the power supply is properly
plugged in (see page 7). To turn on the power,
press the START/PAUSE button or simply begin
exercising. The console will sound a tone and vari-
ous displays and indicators will light. Note: If you
have moved the pedals, the power will already be
on.
Select the manual mode
Each time the power is
turned on, the manual
mode will be selected
and the MANUAL CON-
TROL indicator will light.
If a resistance program
has been selected, press the PROGRAM
SELECT button repeatedly to scroll through the
programs and select the manual mode.
Begin exercising and adjust the resistance
As you exercise, adjust the resistance as desired
by pressing the RESISTANCE buttons. Note:
After the buttons are pressed, it may take a few
seconds for the selected setting to be reached.
Follow your progress with the console displays
As you exercise, the
LED matrix will dis-
play the distance
you have traveled
on a quarter-mile
track. The indicators
around the track will
light one at a time
until the entire track
is lit. A new lap will then begin.
In addition, the two displays will show the
elapsed time, total distance, resistance level, laps
completed, current speed, and calories burned, in
five-second intervals. Your heart rate will also be
shown when the pulse sensor is used (see step 5).
Note: The console can display speed in either
miles per hour or kilometers per hour. When the
power is first turned on, the letters ÒMÓ or ÒKÓ will
appear in the LED matrix to show which mea-
surement is selected. To change the measure-
ment, simultaneously press the PROGRAM
SELECT button
and the START/
PAUSE button until
the console sounds
a tone and the new
measurement
appears. Note: If
you select miles
per hour, distance
will be displayed in miles. If you select kilometers
per hour, distance will be displayed in kilometers.
Measure your heart rate if desired
To use the pulse
sensor, place your
hands on the metal
contacts. Your
palms must be
resting on the
upper contacts and
your fingers must
be touching the
lower contacts. Avoid moving your hands.
When your pulse is detected, the heart-shaped
indicator below the right display will flash each
time your heart beats. After a moment, three
dashes (Ð Ð Ð) will appear and your heart rate will
be shown.
For the most accurate heart rate reading, continue
to hold the contacts for about 15 seconds. The
display will show your heart rate for up to two
minutes; the display will then show your current
speed, calories burned, and your heart rate, in
five-second intervals. Note: Your heart rate will
be shown only when the pulse sensor is used.
When you are finished exercising, the console
will automatically turn off after ten minutes
If the pedals are not moved and the console but-
tons are not pressed for ten minutes, the con-
sole will automatically switch into a ÒsleepÓ
mode. Note: Unplug the power cord following
each use.
6
5
4
3
2
1
HOW TO USE THE MANUAL MODE
Metal
Contacts
WARNING: The pulse sensor
is not a medical device. Various factors,
including the userÕs movement, may
affect the accuracy of heart rate readings.
The pulse sensor is intended only as an
exercise aid in determining heart rate
trends in general.

10
Turn on the power
Make sure that the power supply is properly
plugged in (see page 7). To turn on the power,
press the START/PAUSE button. The console will
sound a tone and various displays and indicators
will light. Note: If you have moved the pedals, the
power will already be on.
Select one of the six resistance programs
Each time the power is
turned on, the manual
mode will be selected
and the MANUAL CON-
TROL indicator will light.
To select one of the
resistance programs,
press the PROGRAM
SELECT button repeatedly until one of the six
resistance program indicators lights.
As you select each program, the LED matrix will
show the first eight settings of the program you
have selected (see step 3).
Start the program
To start the program, press the START/PAUSE
button or simply begin exercising.
Each program is
divided into twenty,
one-minute seg-
ments. One resis-
tance setting is pro-
grammed for each
segment. The setting
for the first segment
is shown in the
flashing CURRENT SEGMENT column of the
LED matrix. The settings for the next seven seg-
ments are shown in the seven columns to the
right.
When only three seconds remain in the first seg-
ment, three tones will sound. All resistance set-
tings will then move one column to the left. The
resistance setting for the second segment will
then be shown in the CURRENT SEGMENT col-
umn and the resistance will automatically adjust to
the second setting.
The program will continue until the resistance set-
ting for the twentieth segment is shown in the
CURRENT SEGMENT column and the TIME dis-
play counts down to zero. The console will then
sound a tone and the two displays will pause. The
console will remain in this state until the START/
PAUSE button or the PROGRAM SELECT button
is pressed.
If the program is too easy
or too difficult, the difficul-
ty level of the program
can be adjusted. There
are five Òfitness levelsÓ
(fitness level 5 is the most
difficult). To change the
fitness level, press the RESISTANCE buttons
repeatedly. An ÒF 1,Ó ÒF 2,Ó ÒF 3,Ó ÒF 4,Ó or ÒF 5Ó will
appear in the left display to show which fitness
level you have selected.
To pause the program before it is completed,
press the START/PAUSE button or allow the ped-
als to come to a stop and step off the pedals. A
tone will sound and the two displays will pause
and flash. To restart the program, simply begin
exercising again. Note: The console will auto-
matically switch into the sleep mode if the
pedals are not moved for ten minutes or
longer.
Follow your progress with the console displays
As you exercise, the two displays will show the
elapsed time, total distance, resistance level, cur-
rent speed, and calories burned, in five-second
intervals. Your heart rate will also be shown when
the pulse sensor is used (see step 5).
Measure your heart rate if desired
See step 5 on page 9.
When the program is completed, the console
will automatically turn off after ten minutes
If the pedals are not moved and the console but-
tons are not pressed for ten minutes, the con-
sole will automatically switch into a ÒsleepÓ
mode. The incline frame will then rise to facilitate
moving the elliptical crosstrainer. Note: Unplug
the power cord following each use.
6
5
4
3
2
1
HOW TO USE A RESISTANCE PROGRAM

Inspect and tighten all parts of the elliptical crosstrainer
regularly. Replace any worn parts immediately.
For smooth
operation of
the elliptical
crosstrainer,
the incline
frame should
be kept clean.
Using a soft
cloth and mild
detergent,
clean dust and
other residue
from the incline
frame where the wheels make contact with it. Other
parts of the elliptical crosstrainer can also be cleaned
in this manner. Never use abrasives or solvents.
LUBRICATING THE INCLINE BRACKET
The incline
bracket and the
bolt on which it
pivots should be
regularly lubricat-
ed. Apply a small
amount of the
included lubricant
to the bolt and
between the
bracket and the
upright.
HOW TO LEVEL THE ELLIPTICAL CROSSTRAINER
If the elliptical
crosstrainer
does not sit
flat on the
floor, one or
both of the
leveling pads
should be
adjusted.
First, loosen
the jam nut on
each leveling
pad. Next,
turn the leveling pads as needed until the elliptical
crosstrainer is level. When the leveling pads are prop-
erly adjusted, firmly retighten the jam nuts.
PULSE SENSOR TROUBLE-SHOOTING
¥ Avoid moving your hands while using the pulse sen-
sor. Excessive movement may interfere with heart
rate readings.
¥ Do not hold the metal contacts too tightly; doing so
may interfere with heart rate readings.
¥ For the most accurate heart rate reading, hold the
metal contacts for about 15 seconds.
¥ For optimal performance of the pulse sensor, keep
the metal contacts clean. The contacts can be
cleaned with a soft clothÑnever use alcohol,
abrasives, or chemicals.
MAINTENANCE AND TROUBLESHOOTING
Incline
Frame
Incline
Bracket
Bolt
Upright
Wheel
11
Pad
Jam
Nut

12
The following guidelines will help you to plan your
exercise program. Remember that a proper diet and
adequate rest are essential for successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. For effective exercise, your heart
rate should be maintained at a level between 70% and
85% of your maximum heart rate as you exercise. This
is known as your training zone.
You can find your training zone in the table below.
Training zones are listed according to age and physi-
cal condition.
Burning Fat
To burn fat, you must exercise at a low intensity level
for a sustained period of time. During the first few
minutes of exercise, your body uses easily accessible
carbohydrate calories for energy. Only after the first few
minutes of exercise does your body begin to use stored
fat calories for energy. If your goal is to burn fat, adjust
the intensity of your exercise until your heart rate is
near the low end of your training zone as you exercise.
Aerobic Exercise
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be Òaerobic.Ó Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the intensity of your exercise until your heart
rate is near the middle of your training zone.
WORKOUT GUIDELINES
Each workout should include three important parts:
(1) a warm-up, (2) training zone exercise, and (3) a
cool-down.
Warming up
Warming up prepares the body for exercise by
increasing circulation, delivering more oxygen to the
muscles, and raising the body temperature. Begin
each workout with 5 to 10 minutes of stretching and
light exercise to warm up.
Training Zone Exercise
After warming up, increase the intensity of your exer-
cise until your heart rate is in your training zone for 20
to 30 minutes.
Cooling Down
Finish each workout with 5 to 10 minutes of stretching.
Stretching after exercise develops flexibility and helps
prevent post-exercise problems.
20 138-167 133-162
25 136-166 132-160
30 135-164 130-158
35 134-162 129-156
40 132-161 127-155
45 131-159 125-153
50 129-156 124-150
55 127-155 122-149
60 126-153 121-147
65 125-151 119-145
70 123-150 118-144
75 122-147 117-142
80 120-146 115-140
85 118-144 114-139
AGE
UNCONDITIONED
TRAINING ZONE
(BEATS/MIN)
CONDITIONED
TRAINING ZONE
(BEATS/MIN)
CONDITIONING GUIDELINES
WARNING: Before beginning this
or any exercise program, consult your physi-
cian. This is especially important for persons
over the age of 35 or persons with pre-exist-
ing health problems.
The pulse sensor is not a medical device.
Various factors, including the userÕs move-
ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.

13
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the
right. Move slowly as you stretchÑnever bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward
from your hips. Allow your back and shoulders to relax as you
reach down toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Hamstrings,
back of knees and back.
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back and groin.
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place
your hands against a wall. Keep your back leg straight and
your back foot flat on the floor. Bend your front leg, lean for-
ward and move your hips toward the wall. Hold for 15 counts,
then relax. Repeat 3 times for each leg. To cause further
stretching of the achilles tendons, bend your back leg as well.
Stretches: Calves, achilles tendons and ankles.
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and
grasp one foot with your other hand. Bring your heel as close
to your buttocks as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Quadriceps and hip
muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees out-
ward. Pull your feet toward your groin area as far as possible.
Hold for 15 counts, then relax. Repeat 3 times. Stretches:
Quadriceps and hip muscles.
1
2
3
4
5
EXERCISE FREQUENCY
To maintain or improve your condition, plan three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exer-
cise, you may complete up to five workouts each
week, if desired.

14
Note: # indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
1 1 Frame
2 1 Upright
3 1 Left Pedal Arm
4 1 Right Pedal Arm
5 1 Incline Frame
6 2 Crank Arm
7 2 Upper Body Arm
8 1 Large Pulley
9 2 Frame Bearing
10 1 3/4Ó x 1 1/4Ó Plastic Spacer
11 1 Flat Delrin Washer
12 1 Idler Bracket
13 1 Pulley
14 2 Idler Bearing
15 1 3/8Ó Push Nut
16 1 3/8Ó x 1Ó Screw
17 6 3/8Ó Flat Washer
18 2 Grip
19 1 5/8Ó x 10Ó Rod
20 2 Plastic Handlebar Sleeve
21 2 Chrome Extension Tube
22 4 Extension Tube Bushing
23 6 Handlebar Bushing
24 1 Incline Bracket
25 1 3/8Ó x 3 1/2Ó Bolt
26 5 3/8Ó Nylon Locknut
27 2 3/8Ó Washer
28 1 Belt
29 1 Incline Axle
30 3 5/16Ó x 1Ó Button Head Screw
31 6 Incline Bushing
32 4 Incline Frame Cap
33 1 Adjustment Cable
34 1 Eddy Bracket
35 9 Zinc #8 x 1/2Ó Screw
36 1 Spring
37 1 Flywheel
38 2 Flywheel Bearing
39 1 Flywheel Axle
40 2 Pedal Disk
41 1 Left Pedal Cover
42 1 Right Pedal Cover
43 6 #8 x 1 1/2Ó Screw
44 6 #10 Washer
45 2 Wheel
46 2 3/8Ó x 1 3/4Ó Button Head Screw
47 1 Left Side Shield
48 1 Right Side Shield
49 1 Console Base
50 1 Reed Switch/Wire
51 1 Extension Wire
52 1 Reed Switch Bracket
53 1 #8 Star Washer
54 1 Reed Switch Clamp
55 1 Magnet
56 2 Pulse Grip
57 1 Wire Harness
58 2 Black Lock Washer
59 2 Bumper
60 1 Upright Cap
61 2 3/4Ó Axle Cap
62 2 2Ó x 3Ó Cap
63 4 1Ó x 2Ó Cap
64 2 3 1/2Ó Round Cap
65 1 5/16Ó Jam Nut
66 1 Hook
67 3 3/8Ó Nylon Jam Nut
68 1 1/4Ó Eyebolt
69 1 1/4Ó Nylon Locknut
70 1 Adjustment Bracket
71 1 #8 x 2 1/2Ó Screw
72 8 #8 x 3/4Ó Screw
73 18 #10 x 3/4Ó Screw
74 3 5/16Ó Zinc Washer
75 2 Leveling Pad
76 4 Pedal Bushing
77 2 Pedal Wheel
78 4 Pedal Wheel Bearing
79 2 5/16Ó x 4Ó Bolt
80 3 5/16Ó Nylon Locknut
81 10 5/16Ó Black Washer
82 2 Extension Tube Spacer
83 2 5/16Ó x 3/4Ó Nylon Lock Bolt
84 2 5/16Ó Lock Washer
85 2 5/8Ó Axle Cap
86 2 Pulse Wire
87 1 Console
88 1 #8 x 1/2Ó Screw
89 1 5/16Ó Nut
90 6 Plastic Tie
91 1 Side Shield Support Strip
92 1 5/16Ó Shoulder Bolt
93 1 Resistance Motor
94 1 Spring Bracket
95 1 Motor Mount
96 1 Power Supply
97 2 #10 Bolt
98 2 3/16Ó Grommet
99 2 #10 Washer
100 2 #10 Nut
# 1 Lubricant
# 1 UserÕs Manual
Key
No. Qty. Description
Key
No. Qty. Description
PART LISTÑModel No. HREL07980 R1199A

EXPLODED DRAWINGÑModel No. HREL07980 R1199A
15
52
54
88
50
81
78
77 78
81
43
44
44
61 76
3
63
63 41
40
73
76
83
74
6
8
11
64
1
64
62
62
46
45
45
46
24
30
81
31
31
31
29
58
30
5
32
32
31
75
74
65
49
35
31
66 16
67
13
12
17
14 15
28
63
4
42
44
43
43
81
81
78
78
76 61
63
76
30
9
9
6
74
83
40 73
73
67
67
17
17
38
68
70
69
34
36
80
38
39
37
48
71 73
73
72
72
77
84
84
35
56
72
47
2
7
7
18
17
19
20
21
21
22
22
23
23 23
27
27
25
26
26
59
59
81
81
79
79
80
80
82
82
85
85
60
72
57
87
35
35
86 53
35
55
89
90
81
81
58
81
10
91
73
73
94
73
95
73
92
14
93
97 98
99
99
100
73
73
51
57
103
96

Part No. 159046 R1199A Printed in USA © 1999 ICON Health & Fitness, Inc.
HOW TO ORDER REPLACEMENT PARTS
To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be
prepared to give the following information when calling:
¥ The MODEL NUMBER of the product (HREL07980).
¥ The NAME of the product (HealthRider¨E530 Elliptical Crosstrainer).
¥ The SERIAL NUMBER of the product (see the front cover of this manual).
¥ The KEY NUMBER and DESCRIPTION of the part(s) from page 14 of this manual.
HealthRider¨is a registered trademark of ICON Health & Fitness, Inc.
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-
ited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be pre-authorized by ICON. This warranty does not
extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse,
improper or abnormal usage or repairs not provided by an ICON authorized service center, products used
for commercial or rental purposes, or products used as store display models. No other warranty beyond
that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss of
property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other con-
sequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-
dental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813