4. Operating process
(1) Plugging in: The indication of 00:00 shows and flashes all the way. At this time,
pressing any button except the “on/off” can stop flashing and start the time going from
00:00. The appliance enters the stand-by state. Pressing the “on/off” button can make
the appliance brew coffee immediately and the time runs from 00:00.
(2) Setting the time: After plugging in or in the stand-by state, set the hours or minutes
by pressing the “h” or the “min” button repeatedly till the time you want. After setting
the time, the indication begins counting like a digital clock. At this time, you can select
to brew now or later at a certain time you want.
(3) Immediate brewing: the immediate brewing can be started in the alternative state:
- After plugging in or in the stand-by state, press the on/off button, the LED lights up
with red and the appliance begins to brew coffee. If the time has not been set, the
time runs from 00:00.
- In the delay brewing state, press the on/off button, the function of delay brewing is
cancelled and the LED with blue goes out; press the on/off button again, the LED lights
up with red and the appliance begins to brew coffee.
(4) Delay brewing: the delay brewing can be started as follows:
- Setting the delay time: hold and press the “Set” button by one hand; meanwhile,
press the “h” or the “min” button by the other hand to set the hours or minutes till the
time you want to brew. Release the “Set”button, the machine returns to display the
running time.
- Starting the delay brewing: After setting the delay time, press the “Delay” button
to start and enter the delay brewing state; the LED lights up with blue all the way.
When the running time reaches the preset delay time, the appliance will switch on
automatically and enter the brewing state and the light of LED changes from blue to
red.
(5) Cancelling: In the brewing state, pressing the “on/off”button can stop heating. In
the delay brewing state, pressing the “on/off”button can cancel the function of the
delay brewing.
Note: After disconnecting from the power supply, the appliance will not save all the
data you set and any state.
