Heinner Juissiart JT-2250R User manual

Model No: JT-2250R
Meat Grinder
INSTRUCTION MANUAL
Please read carefully and keep the instruction well

TABLE OF CONTENTS
PARTS AND FEATURES............................................3
INTRODUCTION ........................................................4
IMPORTANT SAFEGUARDS ....................................5-7
INSTRUCTION FOR USE...........................................8-11
Assembling..................................................................8
Mincer..........................................................................9
Making kebbe...............................................................10
Making sausages.........................................................11
Making noodle..............................................................12
SHREDDER.................................................................12
ASSEMBLING..............................................................12
HOW TO CLEAN YOUR APPLIANCES.....................13
2

DESCRIPTION
17
18
19
20
21
1. Hopper plate 10. Cutting plate (fine)
11. Cutting plate(medium)
12. Cutting plate (coarse)
13. Food pusher
14. Sausage
15. Kebbe
16. Blade cleaner
17-21. Shredder
2. Body
3. Power
4. Reverse
5. Fasten button
6. Head Tube
7. Snake
8. Cutting blade
9. Fixing ring
3

INTRODUCTION
This appliance is equipped with a thermostat system.
This system will automatically cut off the power supply to
the appliance in case of overheating.
If you appliance suddenly stops running:
1. Pull the mains plug out of the socket.
2. Press the switch button to turn off the appliance.
3. Let the appliance cool down for 60 minutes.
4. Put the mains plug in the socket.
5. Switch the appliance on again.
6. Please contact your dealer of an authorized service
center if the thermostat system is activated too often.
7. If you plug in, the indicator light will be on.
8. This appliance shall not be used by children. Keep the
appliance and its cord out of reach of children.
9. Appliances can be used by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and if they understand
the hazards involved.
10. Children shall not play with the appliance.
11. Switch off the appliance and disconnect from supply
before changing accessories or approaching parts
that move in use.
CAUTION: In order to avoid a hazardous situation, this
appliance must never be connected to a time switch.
4

IMPORTANT SAFEGUARDS
1.Read these instructions for use carefully and look at the
illustrations before using the appliance.
2.Before use, tight the fixing ring by spanner, make sure
the ring can not be detach by 4 Nm.
3.Keep these instructions for future reference.
4.Check if the voltage indicated on the appliance
corresponds to the local mains voltage before you
connect the appliance.
5.Never use any accessories of parts from other
manufacture. Your guarantee will become invalid if such
accessories or parts have been used.
6.Do not use the appliance if the mains cord, the plug or
other parts are damaged.
7.If the power cord of this appliance is damaged, it must
always be replaced by manufacture or a service center
authorized, in order to avoid hazardous situations
8.Thoroughly clean the parts that will come into contact
with food before you use the appliance for the first time
9.Unplug the appliance immediately after use
10.Never use your finger or an objection to push ingredients
down the feed tube while the appliance is running. Only
the pusher is to be used for this purpose
11.Keep the appliance out of the reach of children
12.Never let the appliance run unattended
13.Switch the appliance off before detaching and install
any accessory
14.Wait until moving parts have stopped running before you
remove the parts of the appliance
5

15.Never immerse the motor unit in the water or any other
liquid, nor rinse it under the tap. Use only a moist cloth
to clean the motor unit
16.Do not attempt to grind bones, nuts or other hard items.
17.Never reach into the cutter housing. Always use the
pusher
18.Mincers are fed with sinewless, boneless and fatless
beef that has been cut into pieces approximately
20 mm x 20 mm x 60 mm. Pushers are pressed with
a force of 5N against the meat. Do not use the appliance
for more than 5 minutes consecutively. Leave the
appliance to cool for 10 minutes before using again.
19.Accessories shall include instructions for their safe use.
20.It shall warn of potential injury from misuse.
21.This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been give supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
22.Children should be supervised to ensure that they do not
play with the appliance.
23.If the appliance is locked, please press Reversal button
(REV). The meat locked in cutter housing is untrodden,
so the appliance can renew its usual condition.
24.Disposal of appliances and batteries.
After the implementation of the European Directive
2002/96/EU in the national legal system, the followi
ng applies:
6
IMPORTANT SAFEGUARDS

26.Electrical and electronic devices may not be disposed
of with domestic waste. Consumers are obliged by law
to return electrical and electronic devices at the end of
their service lives to the public collecting points set up
for this purpose or point of sale. Details to this are
defined by the national law of the respective country.
This symbol on the product, the instruction manual or
the package indicates that a product is subject to these
regulations. By recycling, reusing the materials or other
forms of utilising old devices, you are making an important
contribution to protecting our environment.
27.This appliance can be used by children aged from 8 years
and above if they have been given supervision or
instruction concerning use of the appliance in a safe way
and if they understand the hazards involved. Cleaning
and user maintenance shall not be made by children
unless they are aged from 8 years and above and
supervised. Keep the appliance and its cord out of reach
of children aged less than 8 years.
28.This appliance is intended to be used in household and
similar applications such as:
– staff kitchen areas in shops, offices and other working
environments;
– farm houses;
– by clients in hotels, motels and other residential type
environments;
– bed and breakfast type environments.
7
IMPORTANT SAFEGUARDS

INSTRUCTION FOR USE
Assembling
1.Press the fasten button,
hold the head and insert it
into the inlet when inserting
please pay attention the
head must be slanted as
per arrow indicated on the
top, see (fig.1), then move
the head anticlockwise so
that the head being fastened
tightly. (fig.2)
2.Place the snake into the
head, long end first, and turn
to feed the screw slightly until
it is set into the motor
housing. (fig.3)
3.Place the cutting blade onto the snake shaft with the
blade facing the front as illustrated (fig.4). If it is not fitted
properly, meat will not be grinded.
4.Place the desired cutting plate next to the cutting blade,
fitting protrusions in the slot. (fig.5)
5.Support or press the center of the cutting plate with one
finger then screw the fixing ring tight with another hand
(fig.6). Do not over tighten.
8

INSTRUCTION FOR USE
6.Place the hopper plate on the head and fix it into position.
7.Locate the unit on a firm place.
8.The air passage at the bottom and the side of the motor
housing should be kept free and not blocked.
1.Insert the worm shaft into the cutter housing, the
plastic end first.
Place the cutter unit onto the worm shaft. (The cutting
edges should be at the front) Place the medium grinding
disc or coarse grinding disc (depending on the consistency
you prefer) onto the worm shaft. (Make sure the notch of
the grinding disc fit onto the projections of the mincer head.)
Turn the screw ring in the direction of the arrow on the cutter
housing until it is properly fastened.
2.Attach the cutter housing to the motor unit.
3.Place the tray on the upright part of the cutter housing.
4.Now the appliance is ready for mincing.
Cut the meat into 10cm-long, 2cm-thick strips.
Remove bones, pieces of gristle and sinews as much as
possible. (Never use frozen meat!)
Put the meat in the tray. Use the pusher to gently push the
meat into the cutter hosing. (For steak tartare , mince the
meat with the medium grinding disc twice. ) (fig.7)
Plug the unit on and switch/ knob to "" , then switch
ON/0/R knob to " ON " position. After use it, Plug the unit
on and switch / knob to "", then switch ON/0/R knob
to " R " position.
Mincer
9

INSTRUCTION FOR USE
Making kebbe
10
1.Insert the worm shaft into the cutter
housing, the plastic end first. (fig.8)
Place the cone in the cutter housing.
Place the former on the cutter housing
and screw the ring on the cutter
housing. (fig.9)
2.Attach the cutter housing to the
motor unit.
3.Place the tray on the upright part of
the cutter housing.
4.Now the appliance is ready for
making kebbe. (fig.10)
Feed the prepared kebbe mixture
through the kebbe maker. Cut the
continuous hollow cylinder into the desired lengths and
user as required.
Kebbe is a traditional Middle Eastern dish made primarily
of lamp and bulgur wheat which are minced together to
form a paste the mixture is extruded through the kebbe
maker and cut into short lengths. The tubes can then be
stuffed with a minced meat mixture, the ends pinched
together and then deep fried.