Hellenbrand Reverse Osmosis Systems GRO Series User manual

GRO Series
Hellenbrand’s GRO Series Reverse Osmosis Systems
High Quality, Light Duty Industrial / Commercial
Reverse Osmosis Systems
The GRO Series systems provide high quality water at a
low cost. The base systems have optional packages to
meet most facilities control and monitoring requirements.
GRO Series Benets
• Dependable and simplistic operation
• High quality components
• Over two decades of RO design
• Full water production at low temperatures
• Low cost
Standard Features
• Product water check valve
• Recirculation loop for increased recovery
• Factory performance tested
• Automatic feed water shut-off valve
• Pre-lter pressure gauges
• Feed water low pressure protection
• Pre-lter and product water sample ports
• Product and reject ow meters (available on GRO1600-9600 only)
• Pretreatment lockout (available on GRO1600-9600 only)
• Reject Recirculation
• Thin lm composite membranes
• Corrosion resistant stainless steel frame
• Rotary vane or multi-stage stainless steel centrifugal pumps
depending on model
• Heavy duty, berglass RO pressure vessels (models with 4” vessels)
• Polyethylene or polypropylene tubing & ttings on product plumbing
• 5 Micron sediment pre-lter
• On-Off Switch
• Manual feed water shut-off valve
• Heavy duty concentrate control valve
• RO pump pressure gauge
Optional Features
• Auto restart
• Feed to product blend
• TDS Meter

e
Mode
l
Produc
t
Re
j
ec
t
GP
D
M3/
D
Standard
Output Output Recover
y
Model GPM LPM GPM LPM
GRO 250 0.17 0.64 250 0.94 35%
GRO 500 0.34 1.28 0.52 1.97 500 1.9 40%
GRO 700 0.48 1.81 0.52 1.97 700 2.7 48%
GRO 1600 1.1 4.16 1.1 4.16 1,600 6.1 50%
GRO 3200 2.2 8.32 2.2 8.33 3,200 12.1 50%
GRO 4800 3.3 12.49 2.2 8.33 4,800 18.2 60%
GRO 6400 4.4 16.65 2.7 10.22 6,400 24.2 62%
GRO 8000 5.5 20.82 3 11.36 8,000 30.3 65%
GRO 9600 6.6 24.98 4.4 16.65 9,600 36.4 605
Output is based on 50/60hz, 500 mg/l TDS, 70°F Temperature, 8.0pH.
GRO Specifications
Mode
l
Membrane Membran Pump H
P
Wei
g
ht Size
(
in.
)
Inlet Product Re
j
ect
Quantit
y
Size lb./kilo LxWx
H
Size Size Size
GRO 250 1 2.5" x 21" 1/3 50 / 23 17x26x20 3/8" 1/4" 1/4"
GRO 500 2 2.5" x 21" 1/3 58 / 26 17x26x20 3/8" 1/4" 1/4"
GRO 700 3 2.5" x 21" 1/3 66 / 30 17x26x20 3/8" 1/4" 1/4"
GRO 1600 1 4" x 40" 1 110 / 50 20x19x65 3/4" 1/2" 1/2"
GRO 3200 2 4" x 40" 1 130 / 59 20x19x65 3/4" 1/2" 1/2"
GRO 4800 3 4" x 40" 1.5 160 / 73 20x19x65 3/4" 1/2" 1/2"
GRO 6400 4 4" x 40" 1.5 185 / 84 20x19x65 3/4" 1/2" 1/2"
GRO 8000 5 4" x 40" 2 215 / 98 20x19x65 1 1/2" 1/2"
GRO 9600 6 4" x 40" 2 245 / 111 20x19x65 1 1/2" 1/2"
Hellenbrand, Inc.
404 Moravian Valley Rd
Waunakee, WI 53597
www.hellenbrand.com
Phone [phone]
Product Improvement designs are subject to change without notice.
11/07
GRO Series Specications