Henri Studio 5887F3 User instructions

SETTING UP THE 5887F3
Pump sits on its side, behind the 6888AD (Access Door). Power cord out the back.
Attach tees and tube segments as drawn, using clamps where shown in the photos.
Make sure to place your fountain on
a firm area which will not settle. Use
plenty of help from others with these
heavy pieces. Note: Always follow
local electrical codes and use a 110V
GFCI protected outlet.

IMPORTANT – WINTER CARE
Winter ice build-up can cause damage to concrete statuary.
Follow these tips to reduce winter weathering to your fountain:
* Disconnect power to pumps and lights.
* Remove plugs/stoppers in all fountain bowls to open drains
and let all moisture out. Keep drains open throughout winter.
* Place an absorbant material like burlap, blankets, etc. inside
vases/bowls and cover all with a Henri fountain cover.
* Do not allow snow or ice to build up on or against the
concrete. Remove snow before it turns to ice. Do not use
antifreeze, salt or chemical ice removers as these may
damage concrete.
Online Resources
Products: www.henristudio.com/products
FAQs: www.henristudio.com/faq
Warranty: www.henristudio.com/warranty
Contact : www.henristudio.com/contact-us
Caution: The use of Chlorine or Chlorine Bleach or water
coloring additives may damage the finish of your fountain.