Campania FT-312 User manual

FT
-
312
Vence Wall
Fountain
Three people are recommended for the installation ofthisfountain!
p
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK500 pump (1)
#7 wing nut drain stopper(1)
20” lengthof 1/2” Blacknon-kinktubing(1) **
2” lengthof 5/8” clear vinyltubing (1) **
2” lengthof 1/2” CPVC pipe(1) **
Approx.53”length of3/8”rebar(2)
SpillerSpout (1)
2.8 oztubeofsilicone (1)
Hose clamps(1)*
Wedges(4)
*Hoseclamps maybe used asflow restrictors
** The internaltubinghasbeen preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately20 gallonsof water.
Thisfountain usesalargefountain cover.
(FTNCOV-LG)
Compatible withRefill #10 Device and LEDKits
(A different style stopper mayberequestedfor therefillkit.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF525 - 525GPH Pump
16 FTcord length
Revised August 23, 2018
SHOP NOW
SHOP NOW

FT
-
312
Vence Wall
Fountain
Three people are recommended for the installation ofthisfountain!
Assembleyourfountainon alevelsurface capableofholdingaminimumof1200 pounds with an approximate
4 square footfootprint.
FT-312H(614 lbs)
30”Lx23”Wx23”H
FT-312G(246 lbs)
28”Lx5”Wx31.5”H
FT-312E (72 lbs)
28”Lx7.25”Wx16”H
FT-312F(28lbs)
9”Lx5”Wx20.75”H
1. Position thebasin(FT-312H)wherethefountainis
tobeinstalled, ensuring that it islevel.
2. Assemble thepumpkit
a. NOTE: All pumpscomewith multipleadapters
i. This fountainusesthe smallestadapter
provided.
b. Connect thenon-kink tubingend ofthetubing
assemblytothepumpoutlet withahose
clamp.
3. Laythepumpcordover thenotchat theback-center
ofthebasin(FT-312H).
4. Carefullylowerthewater feature(FT-312G) onto
thebasin(FT-312H).
5. Insertbothpiecesofrebar intothePVCstandpipes
at thetop ofthewater feature(FT-312G).
6. Fit thefountaincap(FT-312E)ontothewater
feature(FT-312G).
7. InserttheCPVCend oftubing assemblyintothe
coupling onthebottomofthewater feature(FT-
312G).
8. Using asmallamountofsilicone, slowlytwistthe
spiller spoutintothewaterfeature(FT-312G).
9. Place thepumpcover (FT-312F) over thepumpand
tubing.
10.Let thefountainsit 24 hoursbeforefilling with
water.
Revised August 23, 2018
SHOP NOW