Hewi ES5370 User manual

M1000_115_ES5370_EN_Vers-001.pdf M1000.115 Page 1of 3
HEWI P.O.-Box 1260 D-34442 Bad Arolsen
HEWI installation-instruction
HEWI double-knob-cylinder ES5370 / ES5372
1) Put the cylinder into the PC-bore. 2) Fix the cylinder with the included cylinder-screw.
Don’t fix the screw too strong.
3) Put the inside knob onto the cylinder-shaft 4) Insert disengagement peg into bore of inside-knob
and secure it by turning and pressing the and link up internal electrical connection by applying
inside-knob against the outside-knob. a little pressure.
Attention: Don´t use brute force!
5) Fit batteries into outside-knob, ensuring 6) Check the function of the cylinder and do the
correct connection (plus-pole pointing out- programming corresponding to the HEWIKey5
wards). manual.
The cylinders clock has to be reseted!

M1000_115_ES5370_EN_Vers-001.pdf M1000.115 Page 2of 3
HEWI P.O.-Box 1260 D-34442 Bad Arolsen
HEWI Montageanleitung
Removal
1) Insert the Unlocking-tool with the short 2) Turn the tool 180° downwards.
arm pointing upwards into the bore of the Remove the inside-knob by turning an pulling.
cylinder-housing (beyond the knob). Remove the cylinder-screw.

M1000_115_ES5370_EN_Vers-001.pdf M1000.115 Page 3of 3
HEWI P.O.-Box 1260 D-34442 Bad Arolsen
Technical Data
General
Producttitle HEWI double-knob-cylinder ES5370
HEWI double-knob-cylinder with non-wake-up-function ES5372
Dimensions
Lenght 25/25 mm, protractable in 5 mm steps each side to a max. lenght over
all of 100 mm
further dimensions on request
Power-supply
current 3 Volt Lithium battery Type CR2 (2 pcs.)
Battery lifetime Min. 30.000 activations
Reading distance <= 30mm
Specific data
Operating temperature 0 to +55C°
Storage temperature -40 to +70C°
PC-Lock corresponding to DINDesignated mounting
Inside of buildings
memory 25.000 or 60.000 identifiers (on request)
Time zones One per identifier
Communication with
programming device
inductive
signaling Optical (green and red LED)
IA