HIK VISION DS-K1109 Series User manual

DS-K1109 Series Card Reader
User Manual

Legal Informaon
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and
all other informaon hereinaer are for descripon and explanaon only. The informaon
contained in the Manual is subject to change, without noce, due to rmware updates or other
reasons. Please nd the latest version of this Manual at the Hikvision website ( hps://
www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of professionals trained in supporng the
Product.
Trademarks
and other Hikvision's trademarks and logos are the properes of
Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH
ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DS-K1109 Series Card Reader User Manual
i

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Data Protecon
During the use of device, personal data will be collected, stored and processed. To protect data,
the development of Hikvision devices incorporates privacy by design principles. For example, for
device with facial recognion features, biometrics data is stored in your device with encrypon
method; for ngerprint device, only ngerprint template will be saved, which is impossible to
reconstruct a ngerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance with
the applicable data protecon laws and regulaons, including without limitaon, conducng
security controls to safeguard personal data, such as, implemenng reasonable administrave and
physical security controls, conduct periodic reviews and assessments of the eecveness of your
security controls.
DS-K1109 Series Card Reader User Manual
ii

Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference in a residenal installaon. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instrucons, may cause harmful interference to radio communicaons. However, there is
no guarantee that interference will not occur in a parcular installaon. If this equipment does
cause harmful interference to radio or television recepon, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operaon.
DS-K1109 Series Card Reader User Manual
iii

EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed
under the EMC Direcve 2014/30/EU, the RoHS Direcve 2011/65/EU
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be disposed
of as unsorted municipal waste in the European Union. For proper recycling, return
this product to your local supplier upon the purchase of equivalent new equipment,
or dispose of it at designated collecon points. For more informaon see:
www.recyclethis.info
2006/66/EC (baery direcve): This product contains a baery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentaon for specic baery informaon. The baery is marked with this
symbol, which may include leering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the baery to your supplier or to a designated
collecon point. For more informaon see:www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
DS-K1109 Series Card Reader User Manual
iv

Safety Instrucon
These instrucons are intended to ensure that user can use the product correctly to avoid danger
or property loss.
The precauon measure is divided into Dangers and Cauons:
Dangers: Neglecng any of the warnings may cause serious injury or death.
Cauons: Neglecng any of the cauons may cause injury or equipment damage.
Dangers: Follow these safeguards to prevent
serious injury or death.
Cauons: Follow these precauons to prevent
potenal injury or material damage.
Danger:
●All the electronic operaon should be strictly compliance with the electrical safety regulaons,
re prevenon regulaons and other related regulaons in your local region.
●Please use the power adapter, which is provided by normal company. The power consumpon
cannot be less than the required value.
●Do not connect several devices to one power adapter as adapter overload may cause over-heat
or re hazard.
●Please make sure that the power has been disconnected before you wire, install or dismantle the
device.
●When the product is installed on wall or ceiling, the device shall be rmly xed.
●If smoke, odors or noise rise from the device, turn o the power at once and unplug the power
cable, and then please contact the service center.
●If the product does not work properly, please contact your dealer or the nearest service center.
Never aempt to disassemble the device yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
Cauons:
●Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnesm radiaon. Avoid the equipment installaon on vibraons surface or places
subject to shock (ignorance can cause equipment damage).
●Do not place the device in extremely hot (refer to the specicaon of the device for the detailed
operang temperature), cold, dusty or damp locaons, and do not expose it to high
electromagnec radiaon.
●The device cover for indoor use shall be kept from rain and moisture.
●Exposing the equipment to direct sun light, low venlaon or heat source such as heater or
radiator is forbidden (ignorance can cause re danger).
DS-K1109 Series Card Reader User Manual
v

●Do not aim the device at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfuncon however), and aecng the endurance of sensor at the
same me.
●Please use the provided glove when open up the device cover, avoid direct contact with the
device cover, because the acidic sweat of the ngers may erode the surface coang of the device
cover.
●Please use a so and dry cloth when clean inside and outside surfaces of the device cover, do
not use alkaline detergents.
●Please keep all wrappers aer unpack them for future use. In case of any failure occurred, you
need to return the device to the factory with the original wrapper. Transportaon without the
original wrapper may result in damage on the device and lead to addional costs.
●Improper use or replacement of the baery may result in hazard of explosion. Replace with the
same or equivalent type only. Dispose of used baeries according to the instrucons provided by
the baery manufacturer.
●Please take care of your card and report card loss in me when card is lost.
●Mulple card types are supported. Please select an appropriate card type according to the card
performance and the usage scenarios.
DS-K1109 Series Card Reader User Manual
vi

Available Models
Product Name Model Wireless
Card Reader DS-K1109DB 13.56 MHz Card Presenng
Frequency, Bluetooth
DS-K1109DKFB 13.56 MHz Card Presenng
Frequency, Bluetooth
DS-K1109DKFB-QR 13.56 MHz Card Presenng
Frequency, Bluetooth
DS-K1109DKB 13.56 MHz Card Presenng
Frequency, Bluetooth
DS-K1109DKB-QR 13.56 MHz Card Presenng
Frequency, Bluetooth
DS-K1109EB 125 KHz Card Presenng
Frequency, Bluetooth
DS-K1109EKFB 125 KHz Card Presenng
Frequency, Bluetooth
DS-K1109EKFB-QR 125 KHz Card Presenng
Frequency, Bluetooth
DS-K1109EKB 125 KHz Card Presenng
Frequency, Bluetooth
DS-K1109EKB-QR 125 KHz Card Presenng
Frequency, Bluetooth
Use only power supplies listed in the user instrucons:
Model Manufacturer Standard
TS-A018-120015Ec Shenzhen Transin Technologies
Co., Ltd
CEE
DS-K1109 Series Card Reader User Manual
vii

Contents
Chapter 1 Overview .................................................................................................................... 1
Chapter 2 Appearance ................................................................................................................ 2
2.1 Front View .............................................................................................................................. 2
2.2 Rear View ............................................................................................................................... 2
Chapter 3 Installaon ................................................................................................................. 4
3.1 DIP Switch Descripon ........................................................................................................... 4
3.2 Wiring Cables ......................................................................................................................... 5
3.2.1 Descripon of Cable ...................................................................................................... 5
3.2.2 Set RS-485 Communicaon Mode ................................................................................ 5
3.2.3 Set Wiegand Communicaon Mode ............................................................................. 6
Chapter 4 Sound Prompt and Indicator ....................................................................................... 8
Appendix A. Prevenve and Cauonary Tips .............................................................................. 9
Appendix B. Communicaon Matrix and Device Command ...................................................... 10
DS-K1109 Series Card Reader User Manual
viii

Chapter 1 Overview
The card reader is a kind of high-performance product, with a 32 bit high-speed processor. It
communicates with access controller via either RS-485 protocol or Wiegand protocol. And a built-in
tamper-proof module helps to protect card reader from malicious damage. As to the physical
appearance, the PC+ABS material makes water proof and dust proof possible in poor environment.
DS-K1109 Series Card Reader User Manual
1

Chapter 2 Appearance
2.1 Front View
The front view of card reader is shown below:
Figure 2-1 Front View
2.2 Rear View
The rear view of card reader is shown below:
DS-K1109 Series Card Reader User Manual
2

Figure 2-2 Rear View
DS-K1109 Series Card Reader User Manual
3

Chapter 3 Installaon
3.1 DIP Switch Descripon
The DIP switch module is shown below. The No. of DIP switch from le to right is 1 to 8.
When the switch is towards ON, it means the switch is enabled, otherwise, the switch is o. If you
set the DIP switch like the gure displayed below, its binary value is 00001100, and its decimal
value is 12.
Table 3-1 Descripon of DIP Switch
No. Descripon DIP Switch Status
1 to 4 Address of RS-485 1: 1
0: 0
5 Card Security
Note
●For DS-K1108AE/AEK, the
DIP switch is reserved.
1: Enable M1 card encrypon
funcon, and disable door
open via NFC card.
0: Disable M1 card encrypon
funcon, enable door open via
NFC card, and read card No.
6 Wiegand protocol or RS-485
protocol.
1: Wiegand protocol
0: RS-485 protocol
7 Wiegand Protocol (available
when No. 6 is 1)
1: Wiegand protocol of 26-bit;
0: Wiegand protocol of 34-bit.
8 Matched Resistance (available
for RS-485 protocol)
1: Enable
0: Disable
DS-K1109 Series Card Reader User Manual
4

3.2 Wiring Cables
Wire the cables between controller and card reader, thus to establish the communicaon between
them.
3.2.1 Descripon of Cable
The descripon of 10 cables is shown below.
Table 3-2 Descripon of Cable
Color Descripon
Orange Wiegand ERR (Available for Wiegand Protocol)
Brown Wiegand OK (Available for Wiegand Protocol)
White Wiegand W1 (Available for Wiegand Protocol)
Green Wiegand W0 (Available for Wiegand Protocol)
Blue RS-485-
Yellow RS-485+
Red PWR (+12 VDC)
Black GND
Gray TAMPER Control
Purple Beep Control (Available for Wiegand Protocol)
3.2.2 Set RS-485 Communicaon Mode
Steps
1. Set the DIP switch of No. 6 as 0.
2. Set the DIP switch of No. 1 ~ 5 for RS-485 address and reading card mode. For details, refers to
DIP Switch Descripon .
3. Wire the cable between controller and card reader as shown below.
DS-K1109 Series Card Reader User Manual
5

Figure 3-1 Wiring for RS-485 Communicaon Mode
3.2.3 Set Wiegand Communicaon Mode
Steps
1. Set the DIP switch of No. 6 as 1.
DS-K1109 Series Card Reader User Manual
6

2. Set the DIP switch of No. 5 and 7 for reading card mode and Wiegand protocol. For details, refers
to DIP Switch Descripon .
3. Wiring the cable between controller and card reader as shown below.
Figure 3-2 Wiring for Wiegand Communicaon Mode
DS-K1109 Series Card Reader User Manual
7

Chapter 4 Sound Prompt and Indicator
Aer the card reader is powered on, LED status indicator will turn green and ashing for 1 me.
Then it will turn red and ashing for 3 mes. At last the buzzer will send out a beep sound
indicang the starng up process is completed.
When using the card reader, it will send out dierent sounds prompt and the LED indicator on it
will have dierent statuses. You can refer to tables below for detailed informaon.
Table 4-1 Descripon of Prompt Sound
Sound Prompt Descripon
One Beep Presenng card prompt
Pressing keys prompt
Prompt of pressing key for too long me when inpung card
No.
Time out prompt for pressing keys or presenng card.
For authencaon: prompt for entering the password aer
presenng the card.
Two Rapid Beeps The operaon of pressing keys or swiping card is valid.
Three Slow Beeps The operaon of pressing keys or swiping card is invalid.
Rapidly Connuous Beeps Prompt for tamper-proof alarm.
Prompt for buzzer alarm.
Slowly Connuous Beeps The card reader is unencrypted.
Table 4-2 Descripon of LED Switch
LED Indicator Status Descripon
Flashing Green for 1 Time and
Flashing Red for 3 Times
The card reader is power on.
Flashing Green For Card + Password authencaon: prompt for entering the
password aer presenng the card.
Solid Green for 2 s The operaon of pressing keys or presenng card is valid.
Solid Red Card reader is working normally.
Flashing Red for 3 Times The operaon of pressing keys or presenng card is invalid.
Flashing Red For RS-485 protocol: Registering failed or card reader is oine.
DS-K1109 Series Card Reader User Manual
8

Appendix A. Prevenve and Cauonary Tips
To guarantee the card reader works properly, please read and obey the notes below.
●If the card reader is powered by the controller, the power supply distance is recommended to be
no longer than 100m. If the distance is longer than 100 m, you are advised to power the card
reader by external 12 V (range: -%10 to +%10) DC power supply, which is non-switched and
linear.
●To guarantee the communicaon between the controller and the card reader, you must use
RVVP cable above 0.5 to connect them.
●If the card reader is installed outside or in environment easy to permeable, it is advisable to
install a waterproof shield.
●If you need to install several card readers, the distance among them must over 30 cm.
●To reduce the noise in long distance transmission, the shield of cable should connect to the GND
of both controller and card reader terminal.
●Please take care of your card and report card loss in me when card is lost.
●If you require a higher security level, use mulple authencaon modes.
●Mulple card types are supported. Please select an appropriate card type according to the card
performance and the usage scenarios.
DS-K1109 Series Card Reader User Manual
9

Appendix B. Communicaon Matrix and Device
Command
Communicaon Matrix
Scan the following QR code to get the device communicaon matrix.
Note that the matrix contains all communicaon ports of Hikvision access control and video
intercom devices.
Figure B-1 QR Code of Communicaon Matrix
Device Command
Scan the following QR code to get the device common serial port commands.
Note that the command list contains all commonly used serial ports commands for all Hikvision
access control and video intercom devices.
Figure B-2 Device Command
DS-K1109 Series Card Reader User Manual
10

UD29976B