HIK VISION DS-96128NI-H16DS-96128NI-H16/HDS-96128NI-H16/IDS-96128NI-H16/H/IDS-96128NI-F16DS-96128NI-F16/HDS-96128NI-F16/IDS-96128NI User manual

Network Video Recorder
User Manual
UD.6L0202D1973A01

User Manual of Network Video Recorder
1
User Manual
COPYRIGHT ©2015 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou
Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user
manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed,
partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated,
Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the
Manual.
About this Manual
This Manual is applicable to Network Video Recorder (NVR).
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other
information hereinafter are for description and explanation only. The information contained in the Manual is
subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the
company website (http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND
ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR
PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.

User Manual of Network Video Recorder
2
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the EMC Directive
2004/108/EC, the LVD Directive 2006/95/EC and the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local
supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection
points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted
municipal waste in the European Union. See the product documentation for specific battery
information. The battery is marked with this symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

User Manual of Network Video Recorder
3
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”.
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Warnings
●Proper configuration of all passwords and other security settings is the responsibility of the installer and/or
end-user.
●In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation
and region. Please refer to technical specifications for detailed information.
●Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with
100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for
detailed information.
●Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire
hazard.
●Please make sure that the plug is firmly connected to the power socket.
●If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then
please contact the service center.
Warnings Follow these
safeguards to prevent serious
injury or death.
Cautions Follow these
precautions to prevent
potential injury or material
damage.

User Manual of Network Video Recorder
4
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
•Ensure unit is installed in a well-ventilated, dust-free environment.
•Unit is designed for indoor use only.
•Keep all liquids away from the device.
•Ensure environmental conditions meet factory specifications.
•Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it
may cause damage to the sensitive electronics within the unit.
•Use the device in conjunction with an UPS if possible.
•Power down the unit before connecting and disconnecting accessories and peripherals.
•A factory recommended HDD should be used for this device.
•Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the battery
manufacturer.

User Manual of Network Video Recorder
5
Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer.
This manual is applicable to the models listed in the following table.
Series
Model
Type
DS-96128NI-H16
DS-96128NI-H16
DS-96128NI-H16/H
DS-96128NI-H16/I
DS-96128NI-H16/H/I
Network Video Recorder
DS-96128NI-F16
DS-96128NI-F16
DS-96128NI-F16/H
DS-96128NI-F16/I
DS-96128NI-F16/H/I
Network Video Recorder
DS-96256NI-H16
DS-96256NI-H16
DS-96256NI-H16/H
DS-96256NI-H16/I
DS-96256NI-H16/H/I
Network Video Recorder
DS-96256NI-F16
DS-96256NI-F16
DS-96256NI-F16/H
DS-96256NI-F16/I
DS-96256NI-F16/H/I
Network Video Recorder
DS-96128NI-H24
DS-96128NI-H24
DS-96128NI-H24/H
DS-96128NI-H24/I
DS-96128NI-H24/H/I
Network Video Recorder
DS-96128NI-F24
DS-96128NI-F24
DS-96128NI-F24/H
DS-96128NI-F24/I
DS-96128NI-F24/H/I
Network Video Recorder
DS-96256NI-H24
DS-96256NI-H24
DS-96256NI-H24/H
DS-96256NI-H24/I
DS-96256NI-H24/H/I
Network Video Recorder
DS-96256NI-F24
DS-96256NI-F24
DS-96256NI-F24/H
DS-96256NI-F24/I
DS-96256NI-F24/H/I
Network Video Recorder

User Manual of Network Video Recorder
6
Product Key Features
General
Connectable to network cameras, network dome and encoders.
Connectable to the third-party network cameras like ACTI, Arecont, AXIS, Bosch, Brickcom, Canon,
PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek and ZAVIO, and cameras that adopt ONVIF or
PSIA protocol.
Connectable to the smart IP cameras.
PAL/NTSC adaptive video inputs.
Each channel supports dual-stream.
Up to 128/256 network cameras can be connected.
Independent configuration for each channel, including resolution, frame rate, bit rate, image quality, etc..
The quality of the input and output record is configurable.
A redundant power supply is provided to improve the system stability.
Local Monitoring
Simultaneous HDMI1/VGAoutput as the main output and the HDMI2 works as the auxiliary output.
All video outputs at up to 1920×1080 resolution.
Live view screen can be switched in group, and manual switch and auto-switch live view are also provided,
and the interval of automatic cycle can be adjusted.
Quick setting menu is provided for live view.
Motion detection, video tampering, video exception alert and video loss alert functions.
Privacy mask.
Multiple PTZ protocols supported; PTZ preset, patrol and pattern.
Zooming in by clicking the mouse and 3D positioning by dragging mouse.
HDD Management
Up to 24/18 SATAhard disks can be connected. (Each disk with a maximum of 4TB storage capacity.)
8 network disks (8 NAS disks, or 7 NAS disks+1 IP SAN disk) can be connected.
The SAS expansion enclosure can be connected for the expanded storage via the miniSAS interface.
Support S.M.A.R.T. and bad sector detection. (Not supported when the RAID function is enabled.)
HDD group management.
Support HDD standby function.
HDD property: redundancy, read-only, read/write (R/W).
HDD quota management; different capacity can be assigned to different channel.
Support RAID0, RAID1, RAID5 and RAID10 storage scheme, and can be enabled and disabled on your
demand.
Recording and Playback
Holiday recording schedule configuration.
Continuous and event video recording parameters.
Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm.
8 recording time periods with separated recording types.
Pre-record and post-record for alarm, motion detection for recording, and pre-record time for schedule and
manual recording.
Locking and unlocking record files.
Local redundant recording.
Playing back record files by events (alarm input/motion detection/VCA).
Playing back record files by smart search (intrusion/motion detection).

User Manual of Network Video Recorder
7
Tag adding for record files, searching and playing back by tags.
Provide new playback interface with easy and flexible operation.
Searching and playing back record files by channel number, recording type, start time, end time, etc.
Smart search for the selected area in the video.
Zooming in when playback.
Reverse playback of multi-channel.
Supports pause, play reverse, speed up, speed down, skip forward, and skip backward when playback, and
locating by dragging the mouse.
Up to 16-ch synchronous playback.
Backup
Export video data by USB or SATA device.
Export video clips when playback.
Management and maintenance of backup devices.
Either Normal or Hot Spare working mode is configurable to constitute an N+1 hot spare system.
Alarm and Exception
Configurable arming time of alarm input/output.
Alarm for video loss, motion detection, video tampering, abnormal signal, video input/output standard
mismatch, illegal login, network disconnected, IP confliction, record exception, HDD error, and HDD full,
hot spare exception, etc.
VCA detection alarm is supported.
VCA search for face detection, behavior analysis, people counting and heat map.
Alarm triggers full screen monitoring, audio alarm, notifying surveillance center, sending email and alarm
output.
Automatic restore when system is abnormal.
Other Local Functions
Operable by front panel, mouse and control keyboard.
Three-level user management; admin user is allowed to create many operating accounts and define their
operating permission, which includes the limit to access any channel.
Operation, alarm, exceptions and log recording and searching.
Manually triggering and clearing alarms.
Import and export of device configuration information.
Network Functions
4 self-adaptive 10M/100M/1000M network interfaces, and various working modes are configurable:
multi-address, network fault tolerance, etc.
4 1000M optical fiber interfaces.
IPv6 is supported.
TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, and iSCSI are supported.
TCP, UDP and RTP for unicast.
Auto/Manual port mapping by UPnPTM.
Remote web browser access by HTTPS ensures high security.
Remote reverse playback via RTSP.
Support accessing by the platform via ONVIF.
Remote search, playback, download, locking and unlocking of the record files, and support downloading
files breakpoint resume.
Remote parameters setup; remote import/export of device parameters.

User Manual of Network Video Recorder
8
Remote viewing of the device status, system logs and alarm status.
Remote keyboard operation.
Remote locking and unlocking of control panel and mouse.
Remote HDD formatting and program upgrading.
Remote system restart and shutdown.
RS-232, RS-485 transparent channel transmission.
Alarm and exception information can be sent to the remote host
Remotely start/stop recording.
Remotely start/stop alarm output.
Remote PTZ control.
Remote JPEG capture.
Two-way audio and voice broadcasting.
Embedded WEB server.
Development Scalability:
SDK for Windows and Linux system.
Source code of application software for demo.
Development support and training for application system.

User Manual of Network Video Recorder
9
TABLE OF CONTENTS
Chapter 1 Introduction........................................................................................................................13
1.1 Front Panel ....................................................................................................................................14
1.2 USB Mouse Operation ..................................................................................................................17
1.3 Input Method Description..............................................................................................................18
1.4 Rear Panel .....................................................................................................................................19
Chapter 2 Getting Started ...................................................................................................................21
2.1 Starting Up and Shutting Down the NVR......................................................................................22
2.2 Setting the Admin Password..........................................................................................................23
2.3 Using the Wizard for Basic Configuration.....................................................................................24
2.4 Adding and Connecting the IP Cameras........................................................................................28
2.4.1 Setting the Admin Password for IP Camera......................................................................28
2.4.2 Adding the Online IP Cameras .........................................................................................29
2.4.3 Editing the Connected IP cameras and Configuring Customized Protocols......................32
Chapter 3 Live View.............................................................................................................................36
3.1 Introduction of Live View .............................................................................................................37
3.2 Operations in Live View Mode......................................................................................................38
3.2.1 Front Panel Operation on Live View.................................................................................38
3.2.2 Using the Mouse in Live View .........................................................................................38
3.2.3 Using an Auxiliary Monitor..............................................................................................39
3.2.4 Quick Setting Toolbar in Live View Mode .......................................................................40
3.3 Adjusting Live View Settings........................................................................................................42
Chapter 4 PTZ Controls......................................................................................................................44
4.1 Configuring PTZ Settings..............................................................................................................45
4.2 Setting PTZ Presets, Patrols & Patterns.........................................................................................46
4.2.1 Customizing Presets..........................................................................................................46
4.2.2 Calling Presets ..................................................................................................................46
4.2.3 Customizing Patrols..........................................................................................................47
4.2.4 Calling Patrols ..................................................................................................................48
4.2.5 Customizing Patterns........................................................................................................49
4.2.6 Calling Patterns.................................................................................................................49
4.2.7 Customizing Linear Scan Limit........................................................................................50
4.2.8 Calling Linear Scan ..........................................................................................................51
4.2.9 One-touch Park.................................................................................................................51
4.3 PTZ Control Panel.........................................................................................................................53
Chapter 5 Recording Settings..............................................................................................................54
5.1 Configuring Parameters.................................................................................................................55
5.2 Configuring Recording Schedule ..................................................................................................58
5.3 Configuring Motion Detection Recording.....................................................................................61
5.4 Configuring VCA Event Recording...............................................................................................63
5.5 Configuring Alarm Triggered Recording.......................................................................................65
5.6 Manual Recording.........................................................................................................................67
5.7 Configuring Holiday Recording ....................................................................................................68