Hillrom TruSystem 7500 U14 User manual

Instructions for use
TruSystem 7500
Operating tabletop universal
AMERICAN ENGLISH
en-US
Read the instructions for use carefully before using the
product components and keep them safe for future reference.

This page is intentionally left blank.

TruSystem 7500
7990020_030_02 – 2078415 – 2021-03-02 3
Manufacturer TRUMPF Medizin Systeme GmbH + Co. KG
Carl-Zeiss-Straße 7–9
07318 Saalfeld
Germany
[email protected]
hillrom.com
TRUMPF Medizin Systeme GmbH + Co. KG is a company of the Hill-
Rom Holdings Group. The manufacturer is hereinafter referred to
as Trumpf Medizin Systeme.
Technical Customer Service The contact details for the current Technical Customer Service
hubs in the individual countries are listed on the Internet at
www.hillrom.com.
Information about the document Original instructions for use
These instructions for use are included in paper form in the scope
of the product supply.
This document applies to the following sales units:
Supporting documents
Phone: [phone]
Fax: [phone]
Document number: 7990020
Language ID: 030
Version: 02
Part number: 2078415
Date of publication: 2021-03-02
Product designation Part number
Operating tabletop U14
OR table top U14 S 1846371
OR table top U14 V 1846373
Operating tabletop U24
OR table top U24 S 1846377
OR table top U24 S W 1846378
OR table top U24 V 1846379
OR table top U24 V W 1846380
OR table top U24 U V 1846381
Operating tabletop U26
OR table top U26 S 1846382
OR table top U26 V 1846384
Operating tabletop ST26
OR table top ST26 S 1846390
OR table top ST26 V 1846391
Product designation Document
number
Instructions for use for the TruSystem 7500
Operating Table
7990010
Compatibility matrix 7990090

TruSystem 7500
47990020_030_02 – 2078415 – 2021-03-02
This page is intentionally left blank.

TruSystem 7500
7990020_030_02 – 2078415 – 2021-03-02 5
Basic information
After purchase, the product is handed over to the operator in an appropriate and professional manner.
Handover is performed by someone authorized by the manufacturer and is documented using a
handover protocol.
Check the packaging on delivery for damage sustained during transport. If damage is noticed before
unpacking, contact the Technical Customer Service.
Before using the product, familiarize yourself with the settings options and how to operate the product.
Observe the information notices on the product.
About the instructions for use
– These instructions for use contain important information about the safe and effective use of this
product.
– The instructions for use are part of the product and must be complied with.
– Read the instructions for use carefully and fully before using the product. The instructions for use
must be thoroughly understood. In the event of uncertainty or questions about the product, please
contact the manufacturer.
– The instructions for use must also be handed over in the event of a change of location or personnel.
– The instructions for use must be kept where the product is used.
– The instructions for use must be easily accessible in full to all users of the product at all times.
– The figures in the instructions for use are highly simplified and are intended to provide a basic
understanding.
– Residual dangers that may occur while using the product are identified in the document with a signal
word. The safety measures required and potential consequences of failing to take these are listed.
A corresponding signal word provides information about the severity of the danger:
© TRUMPF Medizin Systeme GmbH + Co. KG
Reprinting, copying, or translating this document, in whole or in part, is forbidden without the express
written permission of Trumpf Medizin Systeme. All rights under copyright law are expressly reserved by
Trumpf Medizin Systeme.
Signal word Meaning
DANGER This signal word indicates a dangerous situation that will immediately lead to
death or serious injury if no precautionary measures are taken.
WARNING This signal word indicates a dangerous situation that may lead to death or serious
injury if no precautionary measures are taken.
CAUTION This signal word indicates a dangerous situation that may lead to moderate to
slight injury if no precautionary measures are taken.
NOTICE This signal word indicates a dangerous situation that may lead to material
damage or damage to the environment if no precautionary measures are taken.

TruSystem 7500
67990020_030_02 – 2078415 – 2021-03-02
This page is intentionally left blank.

Contents
7990020_030_02 – 2078415 – 2021-03-02 7
Contents
1 Usage specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
1.1 Intended purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.2 Patient definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.1 Combination with other products from Trumpf Medizin Systeme . . . . . . . . . . . . . . . . . . . . . .10
2.2 Information notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
2.2.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
2.2.2 Position and meaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
3 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.1 Overview of operating tabletop U26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.2 Overview of operating tabletop U24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.3 Overview of operating tabletop U14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.4 Operating tabletop ST26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
3.5 Hook couplings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3.6 Side rails. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
3.7 Connections for cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.8 Maximum load capacity U24, U26, ST26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.8.1 Conditions for operating table loads of up to 360 kg / 794 lbs . . . . . . . . . . . . . . . . . . . . . . . 21
3.8.2 Conditions for operating table loads of up to 225 kg / 496 lbs. . . . . . . . . . . . . . . . . . . . . . . 22
3.8.3 Conditions for operating table loads of up to 180 kg / 397 lbs . . . . . . . . . . . . . . . . . . . . . . . 24
3.8.4 Conditions for operating table loads of up to 160 kg / 353 lbs . . . . . . . . . . . . . . . . . . . . . . . 25
3.8.5 Conditions for operating table loads of up to 135 kg / 298 lbs . . . . . . . . . . . . . . . . . . . . . . . 27
3.9 Maximum load capacity for U14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3.9.1 Conditions for operating table loads of up to 360 kg / 794 lbs . . . . . . . . . . . . . . . . . . . . . . 30
3.9.2 Conditions for operating table loads of up to 225 kg / 496 lbs. . . . . . . . . . . . . . . . . . . . . . . . 31
3.9.3 Conditions for operating table loads of up to 180 kg / 397 lbs . . . . . . . . . . . . . . . . . . . . . . . 32
3.9.4 Conditions for operating table loads of up to 160 kg / 353 lbs . . . . . . . . . . . . . . . . . . . . . . . 33
3.9.5 Conditions for operating table loads of up to 135 kg / 298 lbs . . . . . . . . . . . . . . . . . . . . . . . 34
3.10 Maximum permissible load on side rails. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3.11 Use with imaging systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
4 Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
4.1 Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
4.2 Fastening/removing tabletop sections to/from the operating tabletop . . . . . . . . . . . . . . . . 39
4.3 Attaching accessories to the side rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
4.4 Adjusting the operating table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
4.4.1 Trendelenburg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
4.4.2 Longitudinal slide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
4.4.3 Back section - U24, U26, ST26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
4.4.4 Back section joints - U14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
4.4.5 Leg section joints together. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4.4.6 Leg section joints individually. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4.4.7 Upper back section joints (normal patient position) - U26, ST26 . . . . . . . . . . . . . . . . . . . . . 43
4.4.8 Lower leg section joints together (inverted patient position) - U26, ST26 . . . . . . . . . . . . . 43
4.4.9 Lower leg section joints individually (inverted patient position) - U26, ST26 . . . . . . . . . . . 43
4.4.10 Level position. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
4.4.11 Flex down / flex up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
4.4.12 Upper back section joints ( adjustable by hand) - U24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
4.5 Transfer (shuttle operation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
5 Cleaning and disinfection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Contents
87990020_030_02 – 2078415 – 2021-03-02
7 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
8 Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
9 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
10 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
10.1 Operating tabletop U14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
10.2 Operating tabletop U24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
10.3 Operating tabletop U26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
10.4 Operating tabletop ST26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Usage specifications
7990020_030_02 – 2078415 – 2021-03-02 9
1 Usage specifications
In addition to the information on the medical product
TruSystem 7500 Operating Table, the following information
applies.
1.1 Intended purpose
The operating table with a universal operating tabletop is intended
for the following use:
– Patient positioning during surgical interventions from the
initiation of anesthesia and the actual surgery to waking up
from anesthesia
– Application-related repositioning of the patient on the
operating table (without column) within the operating room
– For use in combination with intra-surgical imaging (e.g. CT, MRI,
X-ray) with special tabletop sections
1.2 Patient definition
All patients who are classified as suitable for the operation by a
medical expert.
All patients weighing up to 360 kg / 794 Ibs may be placed onto the
operating table. The conditions for loading the operating table are
specified in Chapter 3.8.

Safety
10 7990020_030_02 – 2078415 – 2021-03-02
2Safety
2.1 Combination with other products from Trumpf Medizin Systeme
Use of the operating tabletop is permitted with other products
from Trumpf Medizin Systeme. The approved products are listed
in the compatibility matrix 1).
2.2 Information notices
2.2.1 Safety instructions
– The information notices on the product provide information
about residual dangers during use, or provide additional useful
information.
– The device label and all information notices must be present
and be undamaged in the prescribed locations on the product.
A damaged, illegible or missing device label / information
notice must be replaced immediately.
– Observe the information notices on the product.
– The information notices must not be altered or removed.
2.2.2 Position and meaning
1 ) Document number 7990090
Single-part operating tabletop
Two-part operating tabletop
D
F
CI
A
EDE
D
G
DD
C
I
H
E
E
A
G
DBB
No. Information
notice
Meaning
[A] Current operating table software
version
[B] Risk of entrapment of fingers during
Trendelenburg/reverse
Trendelenburg function, with the
ST26 operating tabletop (see
Chapter 4.4.1).

Safety
7990020_030_02 – 2078415 – 2021-03-02 11
[C] The operating tabletop can be
cleaned in a washing machine.
[D] Marking for using the extension
carriage
[E] Connection socket for electrical
accessories
[F] Standard head orientation with the
U14 operating tabletop
[G]
(Example)
Designation of the operating tabletop
[H] Reference to US patents
[I] Component type label
Manufacturer
Trumpf Medizin Systeme part number
Serial number
Date of manufacture
No. Information
notice
Meaning

Description
12 7990020_030_02 – 2078415 – 2021-03-02
3Description
3.1 Overview of operating tabletop U26
The operating tabletop is a product component of the
TruSystem 7500 operating table medical product.
The operating tabletop is a two-part operating tabletop, which can
be individually adapted to the required patient position by using
various functions. The back section is permanently attached to the
seat section.
The operating tabletop can be extended at the foot and head-end
hook couplings with tabletop sections. Accessories can be
attached to the lateral side rails.
The operating tabletop has the following electrical functions:
– Head-end longitudinal slide, foot-end longitudinal slide
– Leg section up, leg section down
– Back section up, back section down
– Head section up, head section down
Further electrical functions of the operating table are accessible
via the operating table column.
The transfer of the operating tabletop between the patient
transfer device and the operating theater is accomplished with a
transporter.
3
5
6
7
8
9
2
4
15
16
11
14
B
1
12
A
A
10
13
[1] Seat section
[2] Side rail
[3] Leg section joint, motorized
[4] Hook coupling point for double rail, wide
[5] Connection socket with cover cap for electrical accessories
and the connection to an external service tool for
maintenance and repair
The accessories are optionally available from
Trumpf Medizin Systeme.

Description
7990020_030_02 – 2078415 – 2021-03-02 13
3.2 Overview of operating tabletop U24
The operating tabletop is a product component of the
TruSystem 7500 operating table medical product.
The operating tabletop is a two-part operating tabletop, which can
be individually adapted to the required patient position by using
various functions. The back section is permanently attached to the
seat section.
The operating tabletop can be extended at the foot and head-end
hook couplings with tabletop sections. Accessories can be
attached to the lateral side rails.
The operating tabletop has the following electrical functions:
– Head-end longitudinal slide, foot-end longitudinal slide
– Leg section up, leg section down
– Back section up, back section down
The rails for the upper back section can be moved manually. There
are no joints on the back section of the U version.
Further electrical functions of the operating table are accessible
via the operating table column.
The transfer of the operating tabletop between the patient
transfer device and the operating theater is accomplished with a
transporter.
[6] Insertion opening for traction adapter
The traction adapter is available as an optional accessory
from Trumpf Medizin Systeme.
[7] Bayonet lock for traction adapter
The traction adapter is available as an optional accessory
from Trumpf Medizin Systeme.
[8] Wedge fixture
[9] Back section joint, adjustable by motor
[10] Back section
[11] Upper back section joint, adjustable by motor
[12] Hook coupling for narrow double rail
[13] Cassette rail for X-ray cassette
[14] Crash protection
[15] Head end of the operating tabletop
[16] Foot end of the operating tabletop

Description
14 7990020_030_02 – 2078415 – 2021-03-02
3
5
6
7
8
9
2
4
15
16
17
14
B
1
12
A
A
10
13
C
C
18
19
12
[1] Seat section
[2] Side rail
[3] Leg section joint, motorized
[4] Hook coupling point for double rail, wide
[5] Connection socket with cover cap for electrical accessories
and the connection to an external service tool for
maintenance and repair
The accessories are optionally available from
Trumpf Medizin Systeme.
[6] Insertion opening for traction adapter
The traction adapter is available as an optional accessory
from Trumpf Medizin Systeme.
[7] Bayonet lock for traction adapter
The traction adapter is available as an optional accessory
from Trumpf Medizin Systeme.
[8] Wedge fixture
[9] Back section joint, adjustable by motor
[10] Back section
[12] Hook coupling for narrow double rail
[13] Cassette rail for X-ray cassette
[14] Crash protection
[15] Head end of the operating tabletop
[16] Foot end of the operating tabletop
Back section with joint (not U version):
[17] Upper back section joint, adjustable by hand
[18] Locking lever
[19] Release knob

Description
7990020_030_02 – 2078415 – 2021-03-02 15
3.3 Overview of operating tabletop U14
The operating tabletop is a product component of the
TruSystem 7500 operating table medical product.
The operating tabletop is a single-piece operating tabletop, which
can be adapted to the required patient position with the use of
various functions.
The operating tabletop can be extended at the foot and head-end
hook couplings with tabletop sections. Accessories can be
attached to the lateral side rails.
The operating tabletop has the following electrical functions:
– Head-end longitudinal slide, foot-end longitudinal slide
– Leg section up, leg section down
– Back section up, back section down
Further electrical functions of the operating table are accessible
via the operating table column.
The transfer of the operating tabletop between the patient
transfer device and the operating theater is accomplished with a
transporter.
3
5
6
7
8
9
2
4
15
16
14
B
1
20
A
A
[1] Seat section
[2] Side rail
[3] Leg section joint, motorized
[4] Hook coupling point for double rail, wide
[5] Connection socket with cover cap for electrical accessories
and the connection to an external service tool for
maintenance and repair
The accessories are optionally available from
Trumpf Medizin Systeme.
[6] Insertion opening for traction adapter
The traction adapter is available as an optional accessory
from Trumpf Medizin Systeme.
[7] Bayonet lock for traction adapter
The traction adapter is available as an optional accessory
from Trumpf Medizin Systeme.
[8] Wedge fixture

Description
16 7990020_030_02 – 2078415 – 2021-03-02
3.4 Operating tabletop ST26
The operating tabletop is a product component of the
TruSystem 7500 operating table medical product.
The operating tabletop is a two-part operating tabletop, which can
be individually adapted to the required patient position by using
various functions. The back section is permanently attached to the
seat section.
The operating tabletop can be extended at the foot and head-end
hook couplings with tabletop sections. Accessories can be
attached to the lateral side rails.
The operating tabletop has the following electrical functions:
– Head-end longitudinal slide, foot-end longitudinal slide
– Leg section up, leg section down
– Back section up, back section down
– Head section up, head section down
– Trendelenburg, reverse Trendelenburg
The operating tabletop can be further tilted via the additional
adjustment range on the operating tabletop.
Further electrical functions of the operating table are accessible
via the operating table column.
The transfer of the operating tabletop between the patient
transfer device and the operating theater is accomplished with a
transporter.
[9] Back section joint, adjustable by motor
[14] Crash protection
[15] Head end of the operating tabletop
[16] Foot end of the operating tabletop
[20] Hook coupling point for double rail, wide
3
5
6
7
8
9
2
4
15
16
11
14
1
12
A
A
10
13

Description
7990020_030_02 – 2078415 – 2021-03-02 17
[1] Seat section
[2] Side rail
[3] Leg section joint, motorized
[4] Hook coupling point for double rail, wide
[5] Connection socket with cover cap for electrical accessories
and the connection to an external service tool for
maintenance and repair
The accessories are optionally available from
Trumpf Medizin Systeme.
[6] Insertion opening for traction adapter
The traction adapter is available as an optional accessory
from Trumpf Medizin Systeme.
[7] Bayonet lock for traction adapter
The traction adapter is available as an optional accessory
from Trumpf Medizin Systeme.
[8] Wedge fixture
[9] Back section joint, adjustable by motor
[10] Back section
[11] Upper back section joint, adjustable by motor
[12] Hook coupling for narrow double rail
[13] Cassette rail for X-ray cassette
[14] Crash protection
[15] Head end of the operating tabletop
[16] Foot end of the operating tabletop

Description
18 7990020_030_02 – 2078415 – 2021-03-02
3.5 Hook couplings
The hook coupling is a separable connecting point between the
operating tabletop and the tabletop sections. Each hook coupling
is made up of a fixing point or a clamp. The design of the fixing
point determines which clamp can be attached. The hook
couplings are designed so that only certain combinations are
possible, and the configuration of the operating tabletop is always
mechanically secure. There are 3 different fixing points and
clamps, which can be combined as follows:
[A] Single clamp
[B] Double clamp, narrow
[C] Double clamp, wide
[D] Single rail
[E] Double rail, narrow
[F] Double rail, wide
The available hook couplings on the operating tabletop are
specified in Chapter 3. The hook coupling of each tabletop section
is described in the instructions for use for each tabletop section.
Mount
Clamp
Single rail Single rail plus Double rail, narrow, minus Double rail, narrow Double rail, narrow, plus Double rail, wide
Single clamp xxxxxx
Single clamp plus – x–xxx
Double clamp, narrow,
minus (in pairs)
––xxxx
Double clamp, narrow (one) – – xxxx
Double clamp, narrow (in
pairs)
–––xxx
Double clamp, narrow, plus – – – – x x
Doubleclamp,wide –––––x
ABC
DEF

Description
7990020_030_02 – 2078415 – 2021-03-02 19
3.6 Side rails
The operating tabletop is equipped with side rails. Accessories can
be attached to the side rails. The accessories approved by
Trumpf Medizin Systeme are listed in the Compatibility Matrix 2).
The accessories must be taken into account when determining the
total patient weight (see Chapters 3.8, 3.9).
The side rails are available in various country-specific standards
and differ in their dimensions. The side rail according to the US
standard may also have an additional safety mechanism [A]/[B] at
the end of the side rail. The securing device prevents loose
accessories from sliding off the side rail.
3.7 Connections for cables
Only the listed products may be connected to the operating
tabletop.
Connection socket [5] under the seat section:
– Operating panel for table top II (#1549939)
2 ) Document number 7990090
A
B
5

Description
20 7990020_030_02 – 2078415 – 2021-03-02
3.8 Maximum load capacity U24, U26, ST26
WARNING
Do not exceed the permissible load.
• Do not exceed the permitted load capacity for the operating
table. If the permissible load is exceeded, the mobile operating
table may tip over and cause serious injuries to the patient or
staff.
• In general, overloading the operating table can lead to a failure
of electrical functions and cause material damage to
mechanical parts.
The operating table is approved for a maximum patient weight of
360 kg / 794 lbs. The maximum load on the operating table may
only be applied, if the conditions in Chapter 3.8 are met.
Consult Trumpf Medizin Systeme regarding the permissible load in
any configuration of the operating table other than that described
in these instructions for use.
The load comprises the weight of the patient and the net weight
of the accessories. An additional accessory on the operating
tabletop therefore reduces the permissible patient weight. The
net weight of the accessory must be deducted from the
permissible patient weight.
Regardless of the load on the operating table, the load on the
individual accessories and the tabletop sections must be complied
with. The requirements are indicated in the instructions for use of
the products.
The maximum patient weight applies for an evenly loaded
operating tabletop (surface load).
Restriction
The lightweight, single-piece leg section [A] (#1790121) can be
used at all hook coupling points with double rails, taking into
account the restricted patient weight. The lightweight, single-
piece leg section is generally only approved for a patient weight of
up to 135 kg / 298 lbs. A different leg section must be used on the
operating table for a heavier patient.
A