Hillsdale Furniture 1870-010 User manual

PORTER DAYBED
Model #1870-010 / 1870-010A Side Panels
Model #1870-020 / 1870-020A Back Panel
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
Date: 10-28-2015
Page 1 of 1
HARDWARE LIST
A (8) 30mm Wood Screws
B (12) 1/4” x 50mm Allen Bolts
C (12) 1/4” Flat Washers
D (12) 1/4” Spring Washers
E (1) 1/4” Allen Wrench
PARTS LIST
F (1) Back Panel
G (2) Side Panels
H (1) Front Rail
I (1) Rear Rail
J (14) Plywood Slats
QTYPART
8A
12C
HARDWARE QTYPART HARDWARE
12
12
B
D
1E
*
Trundle Sold Separately
Model #1719-030 Trundle Panel
STEP1
Begin assembly by attaching the Back Panel (F) to the back of each Side
Panel (G) by aligning the holes and securing with 2 Allen Bolts (B), 2
Spring Washers (D) & 2 Flat Washers (C) from the backside per each end.
Do not fully tighten bolts for this step.
STEP2
Next attach the Rear Rail (I) to the back of
each Side Panel (G) by aligning the holes and
securing with 2 Allen Bolts (B), 2 Spring
Washers (D) and 2 Flat Washers (C) per
each end. Do not fully tighten bolts for
this step.
STEP3
Attach the Front Rail (H) to the inside of
each Side Rail (G) in the front by
aligning the holes and securing with 2
Allen Bolts (B), 2 Spring Washers (D)
and 2 Flat Washers (C) per each end.
Tighten all bolts from Steps 1 through 3 using
the Allen Wrench (E) that has been provided.
A
BB
B
B
B
B
C
C
C
C
C
C
D
D
D
D
D
D
FIGURE 1
STEP4
Insert both ends of each Plywood
Slat (J) onto the Front and Rear
Rails (H & I) and secure with 8
Wood Screws (A). See Figure 1.
The assembly is now complete.
AA
A
A
A
AA
AA
A
A
A
A
A
A
A
A
A
F
F
J
G
G
G
G
H
H
I
Note: Wood Block is on
the top side of rails for
slat spacing.

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
PORTER TRUNDLE
Model #1870-030 / 1870-030A Trundle Panel
Date: 10-28-2015
Page 1 of 1
HARDWARE LIST
A (8) 1/4” x 20mm Allen Bolts
B (28) Slat Caps
C (24) 20mm Wood Screws
D (6) Metal Casters
E (8) Flat Washers
F (8) Spring Washers
G (1) 1/4” Allen Wrench
PARTS LIST
H (1) Trundle Front Panel
I (2) Trundle Side Panels
J (1) Trundle Back Panel
K(14) Bentwood Slats
QTYPART
8A
24C
HARDWARE QTYPART HARDWARE
28
6
B
D
8E 8F
1G
STEP1
Attach each Trundle Side Panel (I) to the backside of the Trundle Front Panel (H) by aligning holes
and securing with 2 Allen Bolts (A), 2 Spring Washers (F) and 2 Flat Washers (E) per each end. Do
not fully tighten bolts for this step.
STEP2
Attach the Trundle Back Panel (J) to the REMAINING side of each Trundle Side Panel (I) also by
aligning holes and securing with 2 Allen Bolts (A), 2 Spring Washers (F) and 2 Flat Washers (E) per
each end. Tighten all bolts from steps 1 and 2.
STEP3
Attach the Casters (D) to the
bottom of each Trundle Front
Panel (H) and Trundle Back Panel
(J) using 4 Wood Screws (C) per
each caster. Tighten all screws.
STEP4
Finally insert the Slat Caps (B) to
both ends of the Bentwood Slats
(K) and install them to both Front
& Back Panels (H & J) by
pushing into place into
the holes. The
assembly is now
complete.
FF
F
F
F
F
F
F
F
F
F
F
E
E
E
EE
E
E
E
E
E
E
E
H&J
AA
A
A
A
A
A
A
A
A
B
B
C
C
C
CC
C
C
C
D
D
D
DD
D
D
D
J
J
K
KH
H
I
I
I