hilscher netHOST NHST-T100 Instruction Manual

User Manual
netHOST NHST-T100
LAN controlled master devices for Fieldbus and Real-
Time Ethernet Systems
Hilscher Gesellschaft für Systemautomation mbH
www.hilscher.com
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public

Table of contents 2/75
Table of contents
1 Introduction .............................................................................................................................. 5
1.1 About this document ........................................................................................................5
1.1.1 Description of the contents ............................................................................... 5
1.1.2 Obligation to read the manual........................................................................... 6
1.1.3 List of revisions ................................................................................................. 6
1.1.4 Conventions in this document........................................................................... 7
1.1.5 Reference to hardware, firmware, software and drivers ................................... 8
1.2 Contents of the product DVD .........................................................................................10
1.3 Documentation overview................................................................................................12
1.4 Legal notes.....................................................................................................................16
1.5 Registered Trademarks..................................................................................................19
2 Safety ...................................................................................................................................... 20
2.1 General note ..................................................................................................................20
2.2 Intended use ..................................................................................................................20
2.3 Personnel qualification ...................................................................................................20
2.4 Safety references ...........................................................................................................20
2.5 Safety instructions to avoid personal injury....................................................................21
2.5.1 Danger of unsafe system operation ................................................................ 21
2.6 Safety instructions to avoid property damage ................................................................21
2.6.1 Device destruction by exceeding allowed supply voltage ............................... 21
2.6.2 Danger of unsafe system operation ................................................................ 21
2.7 Labeling of safety messages..........................................................................................22
3 Description ............................................................................................................................. 23
3.1 Functionality ...................................................................................................................23
3.2 Device types...................................................................................................................25
3.3 Interfaces .......................................................................................................................26
4 Requirements ......................................................................................................................... 28
5 Device drawings and connectors......................................................................................... 30
5.1 Dimensioned drawings...................................................................................................30
5.2 Positions of the LEDs, connectors and control elements...............................................31
5.2.1 netHOST for Fieldbus systems ....................................................................... 31
5.2.2 netHOST for Real-Time Ethernet systems ..................................................... 32
5.3 Protocol logo and LED label sticker ...............................................................................33
5.4 Device label....................................................................................................................33
5.5 Power supply connector (X1) .........................................................................................33
5.6 Ethernet connectors .......................................................................................................34
5.7 Fieldbus interfaces (X3) .................................................................................................35
5.7.1 PROFIBUS DP interface (NHST-T100-DP/DPM) ........................................... 35
5.7.2 CANopen interface (NHST-T100-CO/COM) ................................................... 35
5.7.3 DeviceNet interface (NHST-T100-DN/DNM) .................................................. 36
5.8 USB interface (Mini-B USB) ...........................................................................................36
5.9 Schematic diagram of Galvanic isolation .......................................................................36
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018

Table of contents 3/75
5.9.1 netHOST for Fieldbus systems ....................................................................... 37
5.9.2 netHOST for RTE systems ............................................................................. 38
6 Mounting and dismounting of netHOST device.................................................................. 39
6.1 Safety messages............................................................................................................39
6.2 Mounting netHOST device onto Top Hat Rail ................................................................40
6.3 Removing netHOST device from the Top Hat Rail ........................................................41
7 Commissioning ...................................................................................................................... 42
7.1 Firmware ........................................................................................................................42
7.2 Configuring the netHOST...............................................................................................42
7.3 Start-up behavior............................................................................................................44
7.3.1 Start-up without SD memory card................................................................... 44
7.3.2 Start-up with inserted SD memory card .......................................................... 44
8 Firmware recovery ................................................................................................................. 45
8.1 Overview ........................................................................................................................45
8.2 Using an SD memory card to reset the netHOST to its “factory settings”......................45
8.3 Using USB to recover firmware......................................................................................47
9 Troubleshooting..................................................................................................................... 51
10 LEDs........................................................................................................................................ 52
10.1 SYS LED ........................................................................................................................52
10.2 APL LED ........................................................................................................................53
10.3 LEDs of the Fieldbus and Real-Time Ethernet systems ................................................54
10.3.1 LED PROFIBUS DP Master (NHST-T100-DP/DPM)...................................... 54
10.3.2 LED CANopen Master (NHST-T100-CO/COM).............................................. 55
10.3.3 LED DeviceNet Master (NHST-T100-DN/DNM) ............................................. 56
10.3.4 LEDs PROFINET IO Controller ...................................................................... 57
10.3.5 LEDs EtherCAT Master .................................................................................. 58
10.3.6 LEDs EtherNet/IP Scanner ............................................................................. 60
11 Technical data ........................................................................................................................ 62
11.1 Technical data of the netHOST devices.........................................................................62
11.1.1 netHOST for Fieldbus systems ....................................................................... 62
11.1.2 netHOST for Real-Time Ethernet systems ..................................................... 64
11.2 Technical data of the protocols ......................................................................................65
11.2.1 PROFIBUS DP Master (NHST-T100-DP/DPM).............................................. 65
11.2.2 CANopen Master (NHST-T100-CO/COM)...................................................... 66
11.2.3 DeviceNet Master (NHST-T100-DN/DNM) ..................................................... 67
11.2.4 PROFINET IO Controller ................................................................................ 68
11.2.5 EtherCAT Master ............................................................................................ 69
11.2.6 EtherNet/IP Scanner ....................................................................................... 70
12 Decommissioning/Disposal .................................................................................................. 71
12.1 Putting the device out of operation.................................................................................71
12.2 Disposal of waste electronic equipment.........................................................................71
List of figures ......................................................................................................................... 72
List of tables........................................................................................................................... 73
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018

Table of contents 4/75
Contacts.................................................................................................................................. 75
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018

Introduction 5/75
1 Introduction
1.1 About this document
1.1.1 Description of the contents
This user manual describes hardware, installation and commissioning of
the LAN controlled Hilscher netHOST master devices for fieldbus and Real-
Time Ethernet networks:
NHST-T100-DP/DPM for PROFIBUS DP (order no.: 1890.410/DPM)
NHST-T100-CO/COM for CANopen (order no.: 1890.500/COM)
NHST-T100-DN/DNM for DeviceNet (order no.: 1890.510/DNM)
NHST-T100-EN/PNM for PROFINET IO (order no.: 1890.840/PNM)
NHST-T100-EN/ECM for EtherCAT (order no.: 1890.110/ECM)
NHST-T100-EN/EIM for EtherNet/IP (order no.: 1890.820/EIM)
NHST-T100-EN for PROFINET IO, EtherCAT or EtherNet/IP
(order no.: 1890.800, hardware and performance are identical to the NHST-
T100-EN/PNM/ECM/EIM devices, but firmware has to be loaded into the
device by the customer)
This document also features the technical data of the devices and of the
supported network protocols. Instructions for resetting a netHOST device to
its “factory settings” (firmware recovery) are also provided here.
The installation of the configuration software and the configuration of the
netHOST devices are not subject of this document.
The installation of the software is described in the user manual Software
Installation netHOST Devices. Instructions on how to configure, diagnose
or test a netHOST device, or how update its firmware are provided in the
operating instruction manual Configuration of LAN controlled master
devices – netHOST.
All devices are delivered with their firmware already installed, except for the
NHST-T100-EN netHOST device. If you are using the NHST-T100-EN, you
will find instructions on how to install the firmware in the operating
instruction manual Configuration of LAN controlled master devices –
netHOST.
See also section Documentation overview [}page12].
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018

Introduction 6/75
1.1.2 Obligation to read the manual
Important:
ØTo avoid personal injury or property damage to your system or
to your device, you must read and understand all instructions in
this manual and in the documents accompanying your device
before installing and operating your device.
ØFirst read the Safety Instructions in the chapter
Safety [}page20].
ØObserve all Safety Messages in this manual.
ØKeep the product DVD providing the product manuals.
1.1.3 List of revisions
Index Date Revision
1 2013-08-05 Created
2 2014-12-05 Devices for Real-Time Ethernet added, document completely revised.
Subtitle of document changed from “Remote Fieldbus Device for Field
Installation“ to „LAN controlled master devices for Fieldbus and Real-
Time Ethernet networks“.
3 2015-07-10 Device NHST-T100-EN for loadable firmware added.
4 2015-07-22 Firmware version in section Hardware and firmware [}page8]
updated to version ≥ 1.7
Section LEDs of the Fieldbus and Real-Time Ethernet
systems [}page54] updated.
Layout of document updated.
Layout of safety messages updated.
5 2018-05-16 Software versions in section Software [}page9] updated.
Section Legal notes [}page16] updated.
Section LEDs EtherCAT Master [}page58] updated.
Section LEDs EtherNet/IP Scanner [}page60] updated.
Reference to stack version (2.7.) in section Technical data PROFINET
IO RT Controller [}page68] updated.
Section Technical data EtherCAT Master protocol [}page69]
updated (stack version 4.4.)
Reference to stack version (2.10.) in section Technical data EtherNet/
IP Scanner (master) protocol [}page70] updated.
Table1: List of revisions
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018

Introduction 7/75
1.1.4 Conventions in this document
Notes, operation instructions and results of operation steps are marked as
follows:
Notes
Note:
<important note>
Note:
<simple note>
<note, where to find further information>
Operation instructions
1. <operational step>
Ø<instruction>
2. <operational step>
Ø<instruction>
Results
<intermediate result>
<final result>
For a description of the labeling of Safety Messages, see section Labeling
of safety messages [}page22].
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018

Introduction 8/75
1.1.5 Reference to hardware, firmware, software and drivers
1.1.5.1 Hardware and firmware
This document relates to the following versions of hardware and firmware:
Devices with preloaded firmware
netHOST device
preloaded with
firmware
Order no. Hardware
revision
Protocol Firmware file Firmware
(starting
from this
version and
higher)
NHST-T100-DP/DPM 1890.410/DPM 4 PROFIBUS DP Master FT20V010.NXF 1.7.x.x
NHST-T100-CO/COM 1890.500/COM 4 CANopen Master FT20V040.NXF 1.7.x.x
NHST-T100-DN/DNM 1890.510/DNM 4 DeviceNet Master FT20V060.NXF 1.7.x.x
NHST-T100-EN/PNM 1890.840/PNM 2 PROFINET IO Controller FT20C0V0.NXF 1.7.x.x
NHST-T100-EN/ECM 1890.110/ECM 2 EtherCAT Master FT20E0V0.NXF 1.7.x.x
NHST-T100-EN/EIM 1890.820/EIM 2 EtherNet/IP Scanner FT20G0V0.NXF 1.7.x.x
Table2: Reference to devices with preloaded firmware
Device for loadable firmware
(Firmware not loaded in state of delivery of device):
netHOST device for
loadable firmware
Order no. Hardware
revision
Supported protocols Loadable
firmware file
Firmware
(starting
from this
version and
higher)
NHST-T100-EN 1890.800 2 PROFINET IO Controller FT20C0V0.NXF 1.7.x.x
EtherCAT Master FT20E0V0.NXF 1.7.x.x
EtherNet/IP Scanner FT20G0V0.NXF 1.7.x.x
Table3: Reference to devices for loadable firmware
Note:
For acting as master device, the NHST-T100-EN requires the
NXLIC-Master license (order no.: 8211.000). Make sure to order
the NHST-T100-EN device together with the master license, so that
it can be delivered with the license already loaded.
If necessary, a master license can also be ordered and installed
belatedly; instructions for this are provided in the operating
instruction manual Configuration of LAN controlled master devices –
netHOST.
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018

Introduction 9/75
1.1.5.2 Software
This document relates to the following software versions:
Software Version File name Path on netHOST Solutions DVD
SYCON.net 1.400.x.x SYCONnet netX setup.exe Setups & Drivers\SYCON.net
Ethernet Device
Configuration Tool
1.900.x.x EnDevConfigTool.msi Setups & Drivers\Ethernet Device Setup Utility
netHOST Device
Test Application
1.2.x.x netHOST.exe Setups & Drivers\netHOST Test
ComProX 1.0.x.x comproX.exe Supplements & Examples\netHOST Device
Recovery\Recovery via USB
Table4: Reference to software
1.1.5.3 Drivers
This document relates to the following driver versions:
Driver Version File name Path on netHOST Solutions DVD
Installation program for
Windows USB drivers,
contains:
- setup.exe Setups & Drivers\USB Driver
·Windows Driver Package
hilusbser
6.0.x.x - -
·Windows Driver Package
hilusbser
6.0.x.x - -
Table5: Reference to drivers
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018

Introduction 10/75
1.2 Contents of the product DVD
The netHOST Solutions product DVD contains:
·PDF documentation for users and developers
·SYCON.net configuration and diagnostic program for Windows
·Ethernet Device Configuration Tool for Windows
·netHOST Device Test Application for Windows
·Communication DLLs for immediate usage in customer-engineered
Windows applications
·source code of the DLLs
·XML templates and examples for configuring the netHOST device
without SYCON.net
·Converter DLL for converting XML text files into netHOST-readable
NXD binary files
·C-Toolkit (source code for developers of Non-Windows target platforms
and embedded systems)
·USB drivers for Windows (only needed for resetting the device to its
factory settings)
·Firmware:
If you are using devices with preloaded firmware, these firmware files
are needed only for resetting the device to its factory settings or for
firmware recovery in case of a device defect.
If you are using an NHST-T100-EN device (netHOST for loadable
firmware), you have to load the corresponding firmware file of the
desired protocol into the device during commissioning with SYCON.net.
·Software for resetting the device to its factory settings and for loading
firmware
·Video-audio tutorials
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018

Introduction 11/75
Directory of the DVD:
Folder Contents
Documentation
1. Software Software documentation for standard users (PDF)
Ethernet Device Setup Utility
SYCON.net
2. Hardware User Manual of the netHOST NHST-T100 device (PDF)
3. For Programmers
0.Understanding the Remote Access
Principle
Documentation for developers (PDF)
1.Communication Interface DLL API
2.C-Toolkit Programming Reference
Guide
3.Shared Memory Interface
4.Communication Protocol specific
APIs
5.Configuration without SYCON.net,
XML file based
Documentation for developers (PDF) and XML files
6.Ethernet Device Scanning UDP
Protocol
Documentation for developers (PDF)
7.Error Codes
4. Installation Instructions Wiring and software installation instructions for standard users (PDF)
Firmware Loadable device firmware
Note: If you are using devices with preloaded firmware, these firmware
files are needed only for resetting the device to its factory settings or
for firmware recovery in case of a device defect.
If you are using an NHST-T100-EN device (netHOST for loadable
firmware), you have to load the corresponding firmware file of the
desired protocol into the device during commissioning with
SYCON.net.
fscommand Files needed for displaying the installation menu of the netHOST
Solutions DVD
Programming & Development
Configuration without SYCON.net, XML file
based
XML files
Generic XML Configuration Schema
Protocol Specific XML Templates
XML2NXD Converter DLL
Developing own remote accessing
Applications
Header Files Header files for compilation
netXTransport Protocol C-Toolkit C source code of the netHOST transport protocol for target platform
adaptation
netXTransport Protocol DLL C++ source codes of the DLLs and the netHOST Device Test
Application for usage under Windows and precompiled Windows DLLs
Wireshark netXTransport Protocol
Interpreter-DLL
DLL files for Wireshark
Setups & Drivers Installation programs for the SYCON.net configuration and diagnostic
software, for the netHOST Device Test Application, for the Ethernet
Device Configuration Tool (Ethernet Device Setup Utility) and for the
USB drivers
Supplements & Examples
netHOST Device Recovery
Recovery via Memory Card Images for recovering the factory settings of the device by memory
card
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018

Introduction 12/75
Folder Contents
Recovery via USB Software for recovering the factory settings of the device via USB
netXTransport Protocol C-Toolkit -
Linux,Win32 Test Applications with Source
Code
netXTransport Protocol C-Toolkit - Test Applications.sfx.exe
netXTransport Protocol DLL - Win32 Test
Application with Source Code
netHOST test application for Windows
SYCON.net Sample Projects SYCON.net example projects
XML2NXD Converter - Test Application
(WPF) with Source Code
XML2NXD Converter - Test Application.sfx.exe
Training & Podcasts Video presentations in avi format
Table6: Directory of netHOST Solutions DVD
1.3 Documentation overview
This section lists documents that are relevant to the user of the netHOST
device.
Basic documents
Title Contents Document ID Path on the netHOST Solutions DVD
User Manual
netHOST NHST-
T100 – LAN
controlled master
devices for Fieldbus
and Real-Time
Ethernet Systems
(this document)
Installation,
commissioning and
hardware description
of the netHOST
devices and other
technical data
DOC130401UMxxEN Documentation\english\2.Hardware\netHOST,
Model NHST-T100-xx\netHOST NHST-T100 – LAN
controlled master devices UM xx EN.pdf
Operating
Instruction Manual
Configuration of
LAN controlled
master devices –
netHOST
Configuring, testing,
diagnosing and
updating firmware of
the netHOST
devices
DOC130402OIxxEN Documentation\english\1.Software\SYCON.net
Configuration Software\Configuration of netHOST-
Devices OI xx EN.pdf
User Manual
Software Installation
netHOST Devices
Instructions for
installing the
netHOST software
DOC130501UMxxEN Documentation\english\4.Installation Instructions
\netHOST - Software Installation UM XX EN.pdf
Operating
Instruction Manual
Ethernet Device
Configuration
Instructions on how
to assign an IP
address to Hilscher
devices
DOC050402OIxxEN Documentation\english\1.Software\Ethernet Device
Setup Utility \Ethernet Device Configuration OI XX
EN.pdf
User Manual
Wiring Instructions
Wiring instructions
(cable
characteristics) for
fieldbus networks
DOC120208UMxxEN Documentation\english\4.Installation Instructions
\Wiring Instructions UM XX EN.pdf
Table7: Basic documentation for netHOST
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018

Introduction 13/75
netHOST as PROFIBUS DP Master
You also need the following documents if you are using an NHST-T100-DP/
DPM netHOST device:
Title Contents Document ID Path on the netHOST Solutions DVD
Operating
Instruction Manual
DTM for Hilscher-
PROFIBUS DP
Master Devices
Description of the
device type manager
for PROFIBUS DP
master devices
DOC070401OIxxEN Documentation\english\1.Software\SYCON.net
Configuration Software\Master Configuration
\PROFIBUS DP Master\PROFIBUS DP Master
DTM OI xx EN.pdf
Operating
Instruction Manual
Generic Slave DTM
for PROFIBUS DP
Slave Devices
Description of the
device type manager
for generic
PROFIBUS DP slave
devices
DOC031001OIxxEN Documentation\english\1.Software\SYCON.net
Configuration Software\Master Configuration
\PROFIBUS DP Master\Slave Configuration
\PROFIBUS DP Generic Slave DTM OI xx EN.pdf
Table8: Additional documentation for netHOST as PROFIBUS DP Master
netHOST as CANopen Master
You also need the following documents if you are using an NHST-T100-
CO/COM netHOST device:
Title Contents Document ID Path on the netHOST Solutions DVD
Operating
Instruction Manual
DTM for Hilscher-
CANopen Master
Devices
Description of the
device type manager
for CANopen master
devices
DOC070402OIxxEN Documentation\english\1.Software\SYCON.net
Configuration Software\Master Configuration
\CANopen Master\CANopen Master DTM OI xx
EN.pdf
Operating
Instruction Manual
Generic Slave DTM
for CANopen Slave
Devices
Description of the
device type manager
for generic CANopen
slave devices
DOC060203OIxxEN Documentation\english\1.Software\SYCON.net
Configuration Software\Master Configuration
\CANopen Master\Slave Configuration\CANopen
Generic Slave DTM OI xx EN.pdf
Table9: Additional documentation for netHOST as CANopen Master
netHOST as DeviceNet Master
You also need the following documents, if you are using an NHST-T100-
DN/DNM netHOST device:
Title Contents Document ID Path on the netHOST Solutions DVD
Operating
Instruction Manual
DTM for Hilscher-
DeviceNet Master
Devices
Description of the
device type manager
for DeviceNet master
devices
DOC070403OIxxEN Documentation\english\1.Software\SYCON.net
Configuration Software\Master Configuration
\DeviceNet Master\DeviceNet Master DTM OI xx
EN.pdf
Operating
Instruction Manual
Generic Slave DTM
for DeviceNet Slave
Devices
Description of the
device type manager
for generic
DeviceNet slave
devices
DOC041201OIxxEN Documentation\english\1.Software\SYCON.net
Configuration Software\Master Configuration
\DeviceNet Master\Slave Configuration\DeviceNet
Generic Slave DTM OI xx EN.pdf
Table10: Additional documentation for netHOST as DeviceNet Master
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018

Introduction 14/75
netHOST as PROFINET IO Controller
You also need the following documents if you are using an NHST-T100-EN/
PNM, respectively NHST-T100-EN device with loaded PROFINET IO
Controller firmware:
Title Contents Document ID Path on the netHOST Solutions DVD
Operating
Instruction Manual
DTM for Hilscher-
PROFINET IO-
Controller Devices
Description of the
device type manager
for PROFINET IO
Controller devices
DOC060302OIxxEN Documentation\english\1.Software\SYCON.net
Configuration Software\Master Configuration
\PROFINET IO Controller\PROFINET IO Controller
DTM OI xx EN.pdf
Operating
Instruction Manual
Generic DTM for
PROFINET IO
Devices
Description of the
device type manager
for generic
PROFINET IO
devices
DOC060305OIxxEN Documentation\english\1.Software\SYCON.net
Configuration Software\Master Configuration
\PROFINET IO Controller \IO Device Configuration
\PROFINET IO Generic Device DTM OI xx EN.pdf
Table11: Additional documentation for netHOST as PROFINET IO Controller
netHOST as EtherCAT Master
You also need the following documents if you are using an NHST-T100-EN/
ECM, respectively NHST-T100-EN device with loaded EtherCAT Master
firmware:
Title Contents Document ID Path on the netHOST Solutions DVD
Operating
Instruction Manual
DTM for Hilscher
EtherCAT Master
Device
Description of the
device type manager
for EtherCAT Master
devices
DOC080404OIxxEN Documentation\english\1.Software\SYCON.net
Configuration Software\Master Configuration
\EtherCAT Master\EtherCAT Master DTM OI xx
EN.pdf
Operating
Instruction Manual
Generic Slave DTM
for EtherCAT Slave
Devices
Description of the
device type manager
for generic EtherCAT
slave devices
DOC071202OIxxEN Documentation\english\1.Software\SYCON.net
Configuration Software\Master Configuration
\EtherCAT Master\Slave Configuration\EtherCAT
Generic Slave DTM OI xx EN.pdf
User Manual
Wiring Instructions
EtherCAT
Wiring instructions
for EtherCAT
networks
DOC121104UMxxEN Documentation\english\4.Installation Instructions\
Wiring Instructions UM xx EN.pdf
Table12: Additional documentation for netHOST as EtherCAT Master
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018

Introduction 15/75
netHOST as EtherNet/IP Scanner
You also need the following documents if you are using an NHST-T100-EN/
EIM, respectively NHST-T100-EN device with loaded EtherNet/IP Scanner
firmware:
Title Contents Document ID Path on the netHOST Solutions DVD
Operating
Instruction Manual
DTM for EtherNet/IP
Scanner Devices
Description of the
device type manager
for EtherNet/IP
Scanner devices
DOC061201OIxxEN Documentation\english\1.Software\SYCON.net
Configuration Software\Master Configuration
\EtherNetIP Scanner\EtherNetIP Scanner DTM OI
xx EN.pdf
Operating
Instruction Manual
Generic, Modular
Generic DTM from
EDS File for non-
modular and
modular EtherNet/IP
Adapter Devices
Description of the
generic, modular
generic device type
manager from EDS
file for non-modular
EtherNet/IP Adapter
devices and modular
EtherNet/IP Adapter
devices
DOC100221OIxxEN Documentation\english\1.Software\SYCON.net
Configuration Software\Master Configuration
\EtherNetIP Scanner\Adapter Configuration
\EtherNetIP Generic Adapter DTM EDS OI xx
EN.pdf
Operating
Instruction Manual
Generic DTM for
EtherNet/IP Adapter
Devices and
Modular Generic
DTM for modular
EtherNet/IP Adapter
Devices
Description of the
generic device type
manager for
EtherNet/IP Adapter
devices and modular
EtherNet/IP Adapter
devices
DOC070203OIxxEN Documentation\english\1.Software\SYCON.net
Configuration Software\Master Configuration
\EtherNetIP Scanner\Adapter Configuration
\EtherNetIP Generic Adapter DTM OI xx EN.pdf
Table13: Additional documentation for netHOST as EtherNet/IP Scanner
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018

Introduction 16/75
1.4 Legal notes
Copyright
© Hilscher Gesellschaft für Systemautomation mbH
All rights reserved.
The images, photographs and texts in the accompanying materials (in the
form of a user's manual, operator's manual, Statement of Work document
and all other document types, support texts, documentation, etc.) are
protected by German and international copyright and by international trade
and protective provisions. Without the prior written consent, you do not
have permission to duplicate them either in full or in part using technical or
mechanical methods (print, photocopy or any other method), to edit them
using electronic systems or to transfer them. You are not permitted to make
changes to copyright notices, markings, trademarks or ownership
declarations. Illustrations are provided without taking the patent situation
into account. Any company names and product designations provided in
this document may be brands or trademarks by the corresponding owner
and may be protected under trademark, brand or patent law. Any form of
further use shall require the express consent from the relevant owner of the
rights.
Important notes
Utmost care was/is given in the preparation of the documentation at hand
consisting of a user's manual, operating manual and any other document
type and accompanying texts. However, errors cannot be ruled out.
Therefore, we cannot assume any guarantee or legal responsibility for
erroneous information or liability of any kind. You are hereby made aware
that descriptions found in the user's manual, the accompanying texts and
the documentation neither represent a guarantee nor any indication on
proper use as stipulated in the agreement or a promised attribute. It cannot
be ruled out that the user's manual, the accompanying texts and the
documentation do not completely match the described attributes, standards
or any other data for the delivered product. A warranty or guarantee with
respect to the correctness or accuracy of the information is not assumed.
We reserve the right to modify our products and the specifications for such
as well as the corresponding documentation in the form of a user's manual,
operating manual and/or any other document types and accompanying
texts at any time and without notice without being required to notify of said
modification. Changes shall be taken into account in future manuals and do
not represent an obligation of any kind, in particular there shall be no right
to have delivered documents revised. The manual delivered with the
product shall apply.
Under no circumstances shall Hilscher Gesellschaft für Systemautomation
mbH be liable for direct, indirect, ancillary or subsequent damage, or for
any loss of income, which may arise after use of the information contained
herein.
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018

Introduction 17/75
Liability disclaimer
The hardware and/or software was created and tested by Hilscher
Gesellschaft für Systemautomation mbH with utmost care and is made
available as is. No warranty can be assumed for the performance or
flawlessness of the hardware and/or software under all application
conditions and scenarios and the work results achieved by the user when
using the hardware and/or software. Liability for any damage that may have
occurred as a result of using the hardware and/or software or the
corresponding documents shall be limited to an event involving willful intent
or a grossly negligent violation of a fundamental contractual obligation.
However, the right to assert damages due to a violation of a fundamental
contractual obligation shall be limited to contract-typical foreseeable
damage.
It is hereby expressly agreed upon in particular that any use or utilization of
the hardware and/or software in connection with
·Flight control systems in aviation and aerospace;
·Nuclear fusion processes in nuclear power plants;
·Medical devices used for life support and
·Vehicle control systems used in passenger transport
shall be excluded. Use of the hardware and/or software in any of the
following areas is strictly prohibited:
·For military purposes or in weaponry;
·For designing, engineering, maintaining or operating nuclear systems;
·In flight safety systems, aviation and flight telecommunications systems;
·In life-support systems;
·In systems in which any malfunction in the hardware and/or software
may result in physical injuries or fatalities.
You are hereby made aware that the hardware and/or software was not
created for use in hazardous environments, which require fail-safe control
mechanisms. Use of the hardware and/or software in this kind of
environment shall be at your own risk; any liability for damage or loss due
to impermissible use shall be excluded.
Warranty
Hilscher Gesellschaft für Systemautomation mbH hereby guarantees that
the software shall run without errors in accordance with the requirements
listed in the specifications and that there were no defects on the date of
acceptance. The warranty period shall be 12 months commencing as of the
date of acceptance or purchase (with express declaration or implied, by
customer's conclusive behavior, e.g. putting into operation permanently).
The warranty obligation for equipment (hardware) we produce is 36
months, calculated as of the date of delivery ex works. The aforementioned
provisions shall not apply if longer warranty periods are mandatory by law
pursuant to Section 438 (1.2) BGB, Section 479 (1) BGB and Section 634a
(1) BGB [Bürgerliches Gesetzbuch; German Civil Code] If, despite of all
due care taken, the delivered product should have a defect, which already
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018

Introduction 18/75
existed at the time of the transfer of risk, it shall be at our discretion to
either repair the product or to deliver a replacement product, subject to
timely notification of defect.
The warranty obligation shall not apply if the notification of defect is not
asserted promptly, if the purchaser or third party has tampered with the
products, if the defect is the result of natural wear, was caused by
unfavorable operating conditions or is due to violations against our
operating regulations or against rules of good electrical engineering
practice, or if our request to return the defective object is not promptly
complied with.
Costs of support, maintenance, customization and product care
Please be advised that any subsequent improvement shall only be free of
charge if a defect is found. Any form of technical support, maintenance and
customization is not a warranty service, but instead shall be charged extra.
Additional guarantees
Although the hardware and software was developed and tested in-depth
with greatest care, Hilscher Gesellschaft für Systemautomation mbH shall
not assume any guarantee for the suitability thereof for any purpose that
was not confirmed in writing. No guarantee can be granted whereby the
hardware and software satisfies your requirements, or the use of the
hardware and/or software is uninterruptable or the hardware and/or
software is fault-free.
It cannot be guaranteed that patents and/or ownership privileges have not
been infringed upon or violated or that the products are free from third-party
influence. No additional guarantees or promises shall be made as to
whether the product is market current, free from deficiency in title, or can be
integrated or is usable for specific purposes, unless such guarantees or
promises are required under existing law and cannot be restricted.
Confidentiality
The customer hereby expressly acknowledges that this document contains
trade secrets, information protected by copyright and other patent and
ownership privileges as well as any related rights of Hilscher Gesellschaft
für Systemautomation mbH. The customer agrees to treat as confidential all
of the information made available to customer by Hilscher Gesellschaft für
Systemautomation mbH and rights, which were disclosed by Hilscher
Gesellschaft für Systemautomation mbH and that were made accessible as
well as the terms and conditions of this agreement itself.
The parties hereby agree to one another that the information that each
party receives from the other party respectively is and shall remain the
intellectual property of said other party, unless provided for otherwise in a
contractual agreement.
The customer must not allow any third party to become knowledgeable of
this expertise and shall only provide knowledge thereof to authorized users
as appropriate and necessary. Companies associated with the customer
shall not be deemed third parties. The customer must obligate authorized
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018

Introduction 19/75
users to confidentiality. The customer should only use the confidential
information in connection with the performances specified in this
agreement.
The customer must not use this confidential information to his own
advantage or for his own purposes or rather to the advantage or for the
purpose of a third party, nor must it be used for commercial purposes and
this confidential information must only be used to the extent provided for in
this agreement or otherwise to the extent as expressly authorized by the
disclosing party in written form. The customer has the right, subject to the
obligation to confidentiality, to disclose the terms and conditions of this
agreement directly to his legal and financial consultants as would be
required for the customer's normal business operation.
Export provisions
The delivered product (including technical data) is subject to the legal
export and/or import laws as well as any associated regulations of various
countries, especially such laws applicable in Germany and in the United
States. The products / hardware / software must not be exported into such
countries for which export is prohibited under US American export control
laws and its supplementary provisions. You hereby agree to strictly follow
the regulations and to yourself be responsible for observing them. You are
hereby made aware that you may be required to obtain governmental
approval to export, reexport or import the product.
Terms and conditions
Please read the notes about additional legal aspects on our netIOT web
site under http://www.netiot.com/netiot/netiot-edge/terms-and-
conditions/.
1.5 Registered Trademarks
Adobe Reader® is a registered trademark of the Adobe Systems
Incorporated.
CANopen® is a registered trademark of CAN in AUTOMATION -
International Users and Manufacturers Group e.V (CiA), Nürnberg.
DeviceNet™ and EtherNet/IP™ are trademarks of ODVA (Open DeviceNet
Vendor Association, Inc).
EtherCAT® is a registered trademark and a patented technology of
Beckhoff Automation GmbH, Verl, Federal Republic of Germany, formerly
Elektro Beckhoff GmbH.
PROFIBUS® and PROFINET® are registered trademarks of PROFIBUS &
PROFINET International (PI), Karlsruhe.
Windows® XP, Windows® Vista, Windows® 7 and Windows® 8 are
registered trademarks of Microsoft Corporation.
All other mentioned trademarks are property of their respective legal
owners.
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018

Safety 20/75
2 Safety
2.1 General note
The user manual, the accompanying texts and the documentation are
written for the use of the products by educated personnel. When using the
products, all safety instructions and all valid legal regulations have to be
obeyed. Technical knowledge is presumed. The user has to assure that all
legal regulations are obeyed.
2.2 Intended use
The netHOST devices described in this manual are communication devices
which connect a TCP/IP network to a fieldbus or Real-Time Ethernet
network. The netHOST devices thus serve as “gateways” between the two
networks.
The netHOST devices are in a compact housing and suitable for DIN rail
mounting according to DIN EN 60715.
2.3 Personnel qualification
The netHOST devices must only be installed, configured and removed by
qualified personnel. Job-specific technical skills for people professionally
working with electricity must be present concerning the following topics:
·Safety and health at work
·Mounting and attaching of electrical equipment
·Measurement and analysis of electrical functions and systems
·Evaluation of the safety of electrical systems and equipment
·Installing and configuring IT
2.4 Safety references
[S1] ANSI Z535.6-2011 American National Standard for Product Safety Information in
Product Manuals, Instructions, and Other Collateral Materials
[S2] DIN EN 62368-1: 2016-05, Audio/video, information and communication
technology equipment - Part 1: Safety requirements (IEC 62368-1: 2014,
modified + Cor.:2015); German version EN 62368-1: 2014 + AC: 2015
[S3] EN 61340-5-1 and EN 61340-5-2 as well as IEC 61340-5-1 and IEC 61340-5-2
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018