WIN Enterprises PL-80240 User manual

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., sales@win-ent.c om www.win-ent.com, [phone]
1
PL-80240
Networking Appliance
Desktop VIA® VX800 Network System with 5 x GbE, SATA, CF,
bypass function, mini-PCI & PCI
User’s Manual
Version 1.0, 6/10

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., sales@win-ent.c om www.win-ent.com, [phone]
2
© Copyright 2008. All Rights Reserved
Manual Edition 1.0, June, 2010
This document contains proprietary info rmation protected by copyright. All rights are reserved; no part
of this manual may be reproduced, copied, translated or transmitted in any form or by any means
without prior written permission of the manufacturer.
The content of this document is intended to be accurate and reliable; the original manufacturer assumes
no responsibility for any inaccuracies that may be contained in this manual. The original manufacturer
reserves the right to make improvements to the products described in this manual at any time without
prior notice.
Trade marks
IBM, EGA, VGA, XT/AT, OS/2 and PS/2 are registered trademarks of International business Machine
Corporation
Award is a trademark of Award Software International, Inc
Intel is a trademark of Intel
RTL is a trademark of Realtek
VIA is a trademark of VIA Technologies, Inc
Microsoft, Windows, Windows NT and MS-DOS are either trademarks or registered trademarks of
Microsoft Corporation
All other product names mentioned herein are used for identification purpose only and may be
trademarks and/or registered trademarks of their respective companies
Limitation of Lia bility
While reasonable efforts have been made to ensure the accuracy of this document, the manufacturer
and distributor assume no liab ility resulting from errors or omissions in this document, or from the use
of the information contained herein.
For more information on PL-80240 or other WIN ENTERPRISES products , please visit our website
http://www.win-ent.com.
For technical support send your inquiries to
[e-mail].

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., [e-mail] www.win-ent.com, [phone]
3
Table of Contents
Chapter 1. General Information ...............................................................................4
1.1 Introducing.........................................................................................................4
1.2 Specifications.....................................................................................................4
1.3 Order Information .............................................................................................. 5
1.4 Packaging...........................................................................................................6
1.5 Precautions.........................................................................................................6
1.6 System Layout ...................................................................................................7
1.7 Board Dimensions..............................................................................................7
Chapter 2. Connector/Jumper Configuration...........................................................9
2.1 Connector/Jumper Location and Definition.......................................................9
2.2 Connector and Jumper Setting .........................................................................11
2.3 CompactFlash
TM
Card Socket Pin Define........................................................19
Chapter 3. BIOS Setup...........................................................................................19
3.1 Quick Setup......................................................................................................19
3.2 Entering the BIOS Setup Utility ......................................................................21
3.3 Menu Options.................................................................................................231
3.4 Advanced Menu .............................................................................................242
3.5 Boot Menu .......................................................................................................32
3.6 Security Menu................................................................................................396
3.7 Chipset Menu .................................................................................................418
3.8 Exit Menu .......................................................................................................42
Chapter 4. Utility & Driver Installation.................................................................47
4.1 Operation System Supporting..........................................................................47
4.2 System Driver Installation .............................................................................474
4.3 LAN Driver Installation.................................................................................485
Appendix A: Watchdog Timer Programming Guide..............................................49
Appendix B: LAN Bypass Programming Guide ...................................................51
Appendix C: System Resources.............................................................................57
Appendix D: Cable Development Kit....................................................................61

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., [e-mail] www.win-ent.com, [phone]
4
Chapter 1. General Information
1.1 Description
The PL-80240 is a compact network security platform specifically designed for
Internet security applications. It is suitable for SOHO (Small Office, Home
Office), SMB (Small Medium Business), and ROBO (Remote Office, Branch
Office) segments. It is designed with VIA® VX800 chipset and supports the low
power VIA® Nano, C7, Eden processor. Both CompactFlash™ and DDR2
SO-DIMM socket can be accessed and replaced to make software upgrades
through an easily removable cover. The PL-80240 supports five Intel® 82574L
GbE Ethernet ports with bypass function on two ports or four GbE Ethernet
ports & four 10/100 Switch ports. Each Ethernet interface has LED indicators
for activity and transfer rate status. For easy access, the back panel has dual
USB 2.0 ports and a console port for local system management, maintenance
and diagnostics. The PL-80240 provides space for an optional slim-type 2.5"
SATA HDD. It is FCC and CE compliant.
1.2 Specifications
CPU VIA® Nano, C7™, Eden™ Processors
Chipset VIA® VX800
Processor System
BIOS AMIFlash BIOS
Technology Un-buffered and Non-ECC DDR2 667
MHz memory
Memory
Capacity Up to 2GB with one SO-DIMM socket
Expansion Expansion Slots one mini-PCI socket
one PCI slot
* Each of them can’t be used in the
same time.
Ethernet GbE Ethernet Five RJ45 GbE ports, Realtek®
RTL8111D, PCI-E x1, co-layout Intel®
82574L & 82583V(Pin to pin) with one
pair bypass function (optional)
4 switch 10/100 ports (optional
expansion module)
Storage HDD One internal 2.5” SATA HDD bracket

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., [e-mail] www.win-ent.com, [phone]
5
Compact Flash Socket One CompactFlash
TM
Type I/II
USB One external USB2.0
One internal 5x2 pin header (2x USB
2.0)
I/O
Serial One RJ45 Console port (COM1)
One internal header for second console
(COM2)
Power Supply Watt 60W power supply, AC to DC12V
Form Factor Desktop
LCD Module N/A
Keypad N/A
LED One Bypass LED (Green)
One Power LED (Green)
One HDD LED(Yellow)
Dimension （ W x D x H ） 232mm (W) x 153.3mm (D) x 44mm (H)
(9.1”W x 6”D x 1.7”H)
Operating Temperature Operating: 0 ~ 40°C ( 32 ~ 104°F )
Storage Temperature -20 ~ 75°C (-4 ~ 167°F)
Mechanical and
Environment
Humidity 10 ~ 85% relative humidity,
non-operating, non-condensing
Weight 1pc/box, 4kgs,
14cm(W) x 38cm(D) x 23.2cm(H)
5boxes/CTN, 20kgs,
40cm(W) x 72.4cm(D) x 26.4cm(H)
Certification CE/FCC
1.3 Ordering Information
We offer some accessories for PL-80240 appliance for customer need.
PL-8024A Desktop VIA® Nano LV 1.3+GHz CPU, 5 GbE (82574L), CF, SATA, Bypass
PL-8024B Desktop VIA® Eden™ ULV 1.0GHz CPU, 5 GbE (82574L), CF, SATA
PL-8024C Desktop VIA® Eden™ ULV 500MHz CPU, 5 GbE (82574L), CF, SATA
PL-8024D Desktop VIA® Eden™ ULV 500MHz CPU, 5 GbE (RTL8111D), CF, SATA
DK001 Cable development kit

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., [e-mail] www.win-ent.com, [phone]
6
1.4 Packaging
Please make sure that the following items have been included in the package
before installation.
1. PL-80240 Appliance
2. Quick Installation Guide (Optional)
3. Cables (Optional)
4. CD-ROM that contains the following folders:
(1) Manual
(2) Quick Installation Guide
(3) System Driver
(4) Ethernet Driver
(5) Utility Tools
If any of the above items are missing or damaged contact [e-mail].
Keep the box and carton for safe shipping and storage. After you unpack the
items, inspect them and make sure everything is intact. Do not plug in the
power adapter if you find the unit appears damaged.
Note: Keep the PL-80240 in the original packaging until you start installation.
1.5 Precautions
Please make sure you properly ground yourself before handling the PL-80240
appliance or system components. Electrostatic discharge can easily damage
the PL-80240 appliance.
Do not remove the anti-static packing until you are ready to install the
PL-80240 appliance.
Ground yourself before removing any system component from protective
anti-static packaging. To ground yourself, grasp the expansion slot covers or
other unpainted parts of the computer chassis.
Handle the PL-80240 appliance by its edges and avoid touching its
components.

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., [e-mail] www.win-ent.com, [phone]
7
1.6 System Layout
PL-80240 Front Side
CPU CF
Socket
DDR2 SO-DIMM
Socket Mini PCI
HDD bay
(optional)
CPU
PCI
PL-80240 Rear Side
Layout

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., [e-mail] www.win-ent.com, [phone]
8
1.7 Board Dimensions

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., [e-mail] www.win-ent.com, [phone]
9
Chapter 2. Connector/Jumper Configuration
2.1 Connectors/Jumper Locations and Definitions

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., [e-mail] www.win-ent.com, [phone]
10
Connector Define Connector Define
CN1 IDE 44 Pins Connector CN22 Gigabit Ethernet RJ-45 (LAN1)
CN2 System Fan Connector CN23 Gigabit Ethernet RJ-45 (LAN2)
CN3 SATA Port 0 Connector CN24 Gigabit Ethernet RJ-45 (LAN3)
CN4 LPC Pin Header CN25 Gigabit Ethernet RJ-45 (LAN4)
CN5 USB Port 2/3 Pin Header CN26 Gigabit Ethernet RJ-45 (LAN5)
CN7 VGA Pin Header CN27 COM1 RJ-45 Connector
CN8 COM2 Pin Header CN28 LCM Pin Header
CN9 SATA Port 1 Connector CN29 Power Jack
CN11 PS2 KB/MS Pin Header JP1 CF Master/Slave Selection
CN13 SATA Power Connector JP2 Clear CMOS
CN17 CPU Fan Connector JP4 LAN1/2 Bypass Selection
CN18 LCM Keypad Pin Header JP5 GPI or H/W Reset Selection
CN19 Back Panel LED (Reserved) JP6 Watchdog Function Selection
CN21 USB Port 0/1 Connector SW1 GPI or H/W Reset Button

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., [e-mail] www.win-ent.com, [phone]
11
2.2 Connector and Jumper Setting
CN1: IDE 44 Pins Connector (2.0mm pitch)
Pin Define Pin Define
1 RSTPIDE# 2 Ground
3 PDD7 4 PDD8
5 PDD6 6 PDD9
7 PDD5 8 PDD10
9 PDD4 10 PDD11
11 PDD3 12 PDD12
13 PDD2 14 PDD13
15 PDD1 16 PDD14
17 PDD0 18 PDD15
19 Ground 20 NC
21 PDDREQ 22 Ground
23 PDIOW# 24 Ground
25 PDIOR# 26 Ground
27 PDIORDY 28 Ground
29 PDDACK# 30 Ground
31 IRQ14 32 V5P0
33 PDA1 34 PD66#
35 PDA0 36 PDA2
37 PDCS#1 38 PDCS#3
39 PIDELED 40 Ground
41 V5P0 42 V5P0
43 Ground 44 N/C
CN2: System FAN Connector

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., [e-mail] www.win-ent.com, [phone]
12
Pin Define
1 Ground
2 +12V
3 Speed Detect
CN3:SATA Port 0 Connector
CN9:SATA Port 1 Connector
Pin Define
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
CN4: LPC Connector
Pin Define Pin Define
1 +3.3V 2 AD 0
3 AD 1 4 AD 2
5 AD 3 6 Frame#
7 PCIERST# 8 +5V
9 CLOCK 10 PME#
11 GND 12
13 SERIRQ 14 LDRQ

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., [e-mail] www.win-ent.com, [phone]
13
CN5: USB Port 2/3 Pin Header
Pin Define Pin Define
1 +5V 2 +5V
3 USB1N 4 USB2N-
5 USB1P 6 USB2P
7 Ground 8 Ground
9 N/A 10 Ground
CN7:VGA Pin Header
Pin Define Pin Define
1 RED 2 GREEN
3 BLUE 4 +5V
5 Ground 6 Ground
7 Ground 8 Ground
9 +5V 10 Ground
11 +5V 12 SDA
13 HSYNC 14 VSYNC
15 SCL 16 NC
CN8: COM2 Pin Header
Pin Define Pin Define
1 DCD# 6 DSR#
2 RXD# 7 RTS#
3 TXD# 8 CTS#

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., [e-mail] www.win-ent.com, [phone]
14
4 DTR# 9 RI#2
5 Ground 10 NC
CN11: PS/2 KB/MS Pin Header
Pin Define Pin Define
1 KCLK 2 MCLK
3 KDAT 4 MDAT
5 N/A 6 N/A
7 PS2_GND 8 PS2_GND
9 PS2_VCC 10 PS2_VCC
CN13: SATA Power Connector
Pin Define
1 +12V
2 GND
3 GND
4 VCC5
CN17: CPU FAN Connector
Pin Define
1 Ground
2 +12V

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., [e-mail] www.win-ent.com, [phone]
15
3 Speed Detect
CN18: LCM Keypad Pin Header
Pin Define
1 ACK#
2 BUSY
3 PE
4 SLCT
5 Ground
CN21: USB Connector
Pin Define
1 +5V
2 DATA0-
3 DATA0+
4 GND
CN22/CN23/CN24/CN25/CN26: Gigabit Ethernet RJ-45 Connector
Pin Define
1 TX+
2 TX-
3 RX+
4 Chassis Ground
5 Chassis Ground
6 RX-

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., [e-mail] www.win-ent.com, [phone]
16
7 Chassis Ground
8 Chassis Ground
D2: Speed indicated LED
1 Gbps GREEN
100 Mbps YELLOW
D1 :Link/Activity LED
Link GREEN
Activity BLINKING
CN27:COM1 RJ-45 Connector
Pin Define(STD)
1 CTS#
2 DTR#
3 TXD#
4 GND
5 Ground
6 RXD#
7 DSR#
8 RTS#
CN28: LCM Pin Header
Pin Define Pin Define
1 +5V 2 Ground
3 AFD# 4 N/A
5 INIT# 6 SLIN#
7 PD1 8 PD0
9 PD3 10 PD2
11 PD5 12 PD4
13 PD7 14 PD6
15 BLN 16 BLP

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., [e-mail] www.win-ent.com, [phone]
17
JP1: CF Master/Slave Selection
Short Master
Open Slave
JP2: Clear CMOS
Pin Setting
1-2 Normal
(Default)
2-3 Clear CMOS
JP4: LAN 1/2 Bypass Selection
Pin Setting
1-2 Normal
(Default)
2-3 Bypass Always
Disable
JP5: GPI or H/W Reset Selection for SW1 Button
Pin Setting
1-2 GPI
2-3 RESET

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., [e-mail] www.win-ent.com, [phone]
18
JP6: Watchdog Function Selection
Pin Setting
1-2 H/W Reset
2-3 Lan Bypass

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., [e-mail] www.win-ent.com, [phone]
19
2.3 CompactFlash
TM
Card Socket Pin Definitions
CompactFlash
TM
card is a small removable mass storage device. It can
provide complete PCMCIA-ATA functionality and compatibility plus True IDE
functionality compatible with ATA/ATAPI-4.
CompactFlash
TM
storage products are solid state form factors, meaning they
contain no moving parts. Thus, they provide users with much greater
protection of the data than conventional magnetic disk device.
Pin Assignment Pin Assignment P in Assignment Pin Assignment Pin Assignment
1 Ground 11 Ground 21 D00 31 D15 41 RESET
2 D03 12 Ground 22 D01 32 CS 42 ORDY
3 D04 13 VCC 23 D02 33 NC 43 DREG
4 D05 14 Ground 24 WP 34 IOR 44 DACK
5 D06 15 Ground 25 NC 35 IOW 45 LED
6 D07 16 Ground 26 NC 36 WE 46 BVD
7 CS 17 Ground 27 D11 37 RDY/BSY 47 D08
8 Ground 18 A02 28 D12 38 VCC 48 D09
9 Ground 19 A01 29 D13 39 SCSE 49 D10
10 Ground 20 A00 30 D14 40 NC 50 Ground

User’s Manual
Custom Embedded Solutions
WIN Enterprises, Inc., [e-mail] www.win-ent.com, [phone]
20
Chapter 3. BIOS Setup
The ROM chip of your PL-80240 board is configured with a customized Basic
Input/Output System (BIOS) from AMI BIOS. The BIOS is a set of
permanently recorded program routines that give the system its fundamental
operational characteristics. It also tests the computer and determines how
the computer reacts to instructions that are sub-sets of programs.
The BIOS is made up of code and programs that provide the device-level
control for the major I/O devices in the system. It contains a set of routines
(called POST, for Power-On Self Test) that check out the system when you turn
it on. The BIOS also includes BIOS Setup Utility, so no disk-based setup
program is required CMOS RAM stores information for:
Date and time
Memory capacity of the appliance
Type of display adapter installed
Number and type of disk drives
The CMOS memory is maintained by battery installed on the PL-80240 board.
By using the battery, all memory in CMOS can be retained when the system
power switch is turned off. The system BIOS also supports easy way to
reload the CMOS data when you replace the battery of the battery power lose.
3.1 Quick Setup
In most cases, you can quickly configure the system by choosing the following
main menu options:
1. Choose “Exit” “Load Optimal Defaults” from the main menu. This loads
the setup default values from the BIOS Features Setup and Chipset
Features Setup screens.
2. Choose “Main” & “Advanced” from the main menu. This option lets you
configure the date and time, hard disk type, floppy disk drive type, primary
display and more.
3. In the main menu, press F10 (“Save Changes and Exit”) to save your
changes and reboot the system.