Power tool TE 7‑A
Drilling speed without hammering 0…800/min
Hammer drilling speed 740/min
Single impact energy in accordance with EPTA proced-
ure 05/2009 2.6 J
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
giveninEN60745andmaybeusedtocompareonetoolwithanother.Itmaybeused for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Noise and vibration information (measured in accordance with EN 60745‑1):
Typical A-weighted sound power level 99 dB (A)
Typical A-weighted emission sound pressure level. 88 dB (A)
Uncertainty for the given sound level 3 dB (A)
Triaxial vibration values (vibration vector sum) Measured in accordance with EN 60745‑2‑6
Hammer drilling in concrete, ah, HD 11 m/s²
Chiseling, ah, Cheq 9m/s²
Uncertainty (K) for triaxial vibration value 1.5 m/s²
Other information about the power tool
Chuck TE‑C Click
Battery B36/2.4NiCd B 36/3.3 Li‑Ion B 36/3.9 Li‑Ion
Rated voltage 36 V 36 V 36 V
Capacity 2.4 Ah 3.3 Ah 3.9 Ah
Energy capacity 86.4 Wh 118.8 Wh 140.4 Wh
Weight 2.1kg 1.65kg 1.65kg
Type of cell NiCd Li‑ion Li‑ion
Number of cells 30 30 30
Recommended working
temperature range -20…+80°C -20…+80°C -20…+80°C
5 Safety instructions
NOTE
The safety rules in section 5.1 contain all general safety
rules for power tools which, in accordance with the
applicable standards, require to be listed in the operating
instructions. Accordingly, some of the rules listed may
not be relevant to this tool.
5.1 General power tool safety warnings
a) WARNING
Read all safety warnings and all instructions. Fail-
ure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
en
20
Printed: 07.07.2013 | Doc-Nr: PUB / 5142490 / 000 / 00
