
HIMO Battery Charger User Manual
Type: DPLC084V42
1. Features
This product is a smart charger. The switching power supply is a special
charger for lithium batteries with superior performance. It has the
following advantages:
Wide voltage input: 180-264VAC.
Output ripple noise is small
Intelligent anti-reverse connection
With anti-backflow function
Adopting a fully sealed structure, it is safe and reliable to use
2. Applicable Scope
This charger is suitable for charging 42V/8-15AH lithium electronic
battery pack with a charging voltage of ±0.4V.
3. Instructions
When using the battery box it should be plugged in first, then plug
in the AC power plug;
When charging normally, the power charging indicator shows red,
and when fully charged, the charging indicator shows green.
When the battery is fully charged, the charging indicator shows green.
If you want to stop charging, you should unplug the AC power plug first
and then unplug the battery box.
4. Troubleshooting
Failure phenomenon Cause of failure
The power indicator
does not light up
Charging indicator
does not light up
The charging indicator
is always on
Check if there is AC input
Check whether the input line interface is in poor
contact
Whether the output connector is connected
Whether the battery is damaged
Whether the battery is damaged
If all of the above may be discharged, please send it to the factory for repair
instead of repairing by yourself.
Warning
1. The charger is limited to indoor use.
2. Do not charge non-rechargeable batteries.
3. Do not disassemble, repair or modify by yourself.
4. Do not use in an environment with flammable gas, it may cause
explosion or fire.
5. Do not put the charger near water or get wet, it may catch fire
or electric shock.
6. Unplug the power cord immediately when the charger has abnormal
conditions such as smoke or burning smell.
7. If the charger is damaged due to collision or other reasons, and the
internal parts are exposed, please do not touch it with your hands,
as it may cause electric shock and injury.