Connections
3●Before connecting the AC power cord, ensure
you have completed all other connections.
4Basic Operation
sequentially. While in STANDBY mode, the LED
is in solid red.
Standby/On
socket, the main unit will be in STANDBY mode.
• Press the button on the unit or on the
remote control to switch the unit ON.
• Press the button again to switch the unit
back to STANDBY mode.
•Disconnect the mains plug from the mains
socket if you want to switch the unit OFF
completely.
Auto Wake
• If a TV or an external device is connected (AUX
/ OPTICAL / COAXIAL / HDMI ARC), the unit
will switch on automatically when the TV or
the external device is switched on.
•
•
How to Enable Auto Wake
Short press the (SOURCE) button and
+(VOL +) button on the unit to enable or
disable Auto Wake function.
Auto Wake On: white and green LED blink twice
sequentially. While in STANDBY mode, the
RED LED is breathing.
•
The unit automatically turns to STANDBY mode
after about 15 minutes if the TV or the external
•
mains plug from the mains socket.
• Please turn the unit completely to save
energy when not in use.
Select Modes
Press the (SOURCE) button repeatedly on
the unit or on the remote control to select the
OPTICAL,COAXIAL,HDMI ARC,BT(Bluetooth),
USB,AUX mode.
The selected mode will show on the display.
Adjust the Bass/Treble Level
• Press TREBLE +/- button to increase or
decrease the treble. (treble+5 / treble–5)
• Press BASS+/- button to increase or decrease
the bass. (bass+5 / bass–5)
• After about 3 seconds, the unit will exit from
bass/treble setting. The display will show the
current selected mode. You may now press the
VOL+ / - buttons to adjust volume.
•
•
sequence to turn on Auto Standy mode.
In Aux on mode, press - - - in
OPTICAL COAXIAL
AUX
A
AUDIO OUT
B
HDMI ARC
BS Plug
US Plug
*Power cable plug type varies by region.
