Hitachi SCI User manual

Getting Started
© 2000 Hitachi Koki Imaging Solutions, Inc.
1757 Tapo Canyon Rd.
Simi Valley, CA 93063
April 2000
337096-001, Revision A
50/62 ppm Printer

© 2000 Hitachi Koki Imaging Solutions, Inc. All rights reserved.
No part of this document may be reproduced without the expressed permission of
Hitachi Koki Imaging Solutions, Inc.
The material in this document is for informational purposes and is subject to change
without notice. Hitachi Koki Imaging Solutions, Inc., assumes no responsibility for
errors or omissions in this document. No liability is assumed for any damages
resulting from the use of the information it contains.
TRADEMARK
Hitachi Koki Imaging Solutions, Inc., ScanCenter, and their associated logo marks,
are trademarks of Hitachi Koki Imaging Solutions, Inc.
Hitachi and the Hitachi logo are trademarks of Hitachi, Ltd. All rights reserved.
NOTICE TO USER
In an effort to meet the demands of a rapidly changing technology, the manufacturer
is continually developing new features and functions to meet your changing printing
or printer needs. As a result, this manual may not exactly reflect future changes made
to the product. Please be sure to consult all manual updates or addenda when using
this product’s documentation.

Preface i
Preface
What This Manual Contains
■Chapter 1 (Unpacking and Setup) shows how to unpack the
ScanCenter, how to attach the necessary cables and power cord, and
provides power up instructions.
■Appendix A (Safety Information) provides safety, certification, and
environmental information.
Related Documentation
■ScanCenter User’s Guide
■ScanCenter Quick Reference Guide
■ScanCenter Service Manual
■ScanCenter Illustrated Parts List

ii Preface

Contents iii
Contents
What This Manual Contains. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Chapter 1. Unpacking and Setup
Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Selecting a Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Unpacking the Scanner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Shipaway Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Scanner Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4
Rear View Without Shroud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-5
Attaching the Cables and Power Cord to the Scanner . . . . . . . . . . . . . . . .1-5
Attaching the Shroud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-6
Attaching the Printer Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
Power Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-8
Appendix A. Safety Information
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
Certifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
FCC Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
Canadian Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
CE Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4
Environmental Limit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

Contents iv

Unpacking and Setup 1-1
Chapter 1
Unpacking and Setup
Before You Begin
Set up of the printer must be complete before you begin to set up the
scanner.
Selecting a Location
The scanner can be located on top of the printer, or on a flat, stable surface
near the printer. Whatever the location, be sure it is cleared and ready
before you begin to unpack the scanner.

1-2 Unpacking and Setup
Unpacking the Scanner
Follow these instructions for unpacking the scanner. The packing
arrangement is illustrated in the figure below.
1. Open the box.
2. Lift up and remove the left, right, and front packaging foam.
3. Lift up and remove the shipaway kit packaging.
4. Reach under the scanner, lift it out of the box and place it in the
location you have prepared for it.
5. Place all of the packaging foam back in the box and save it for use in
case you have to ship the scanner to another location.
WARNING!
The scanner weighs approximately 55 lb. Two people must be
available to lift the scanner from the box.
Left and Right
Front Packaging Foam
Shipaway Kit
Packaging
Bottom
Packaging Foam
Packaging Foam

Unpacking and Setup 1-3
Shipaway Kit Contents
You will need the following items from the shipaway kit to set up the
scanner:
■Shroud
■Standoffs (2 ea.)
■Tie Wrap (1 ea.)
■Printer Cable
■Power Cord (USA and Europe only)

1-4 Unpacking and Setup
Scanner Components
Rear View Without Shroud
ADF
ADF
Exit Table Extension
Document Table
Document
Document
ADF Cover
Indicator Support Wire
Guides
OCP
OCP
Cable Cover Power
Scanner Indicator Lamps
Exit Table
Switch
Lamps
Power Plug Inlet
Image Processing
Reset Switch SCSI ID Rotary Switch
DIP Switches
SCSI Connectors
(Do Not Use)
(Do Not Use)
(Do Not Use)
Printer Connector
OCP Cable
Board