Hodedah HI425-G User manual

1
Hodedah
www.hodedah.com
support @hodedah.com
HI 425
L47 28" X D23 58" X H29 48"

PART & HARDWARE LIST
2
CAP
Hodedah
www.hodedah.com
support @hodedah.com
APLASTIC DOWEL M8 X 25MM 17
B 24
CSK CAP M6 X 40MM
4
POWER NAIL 68"
G
16
P/H SCREW M4 X 40MM
I
4+4
G1
G2
E1 E2
C
CB SCREW M3.5 X 12MM
16
D 9
E5
F1
CB SCREW M4 X 35MM
2
MINIFIX 5654
DRAWER SLIDE 12"
Q1
ALLEN KEY
H
1
2
5
346
7
8
910
9
11 8
910
11 9
HANDLE 2379 (160MM) - PVC
F2
14
PLASTIC PIN 4J

3
- This product contains small components, please ensure that they are
kept away from small children.
- THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE
REFERENCE.
STOP
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, email our customer
service. We will gladly ship your replacement parts
FREE of charge.
email us at
[email protected]
For prompt, reliable service; please have your
assembly manual ready.
Need Parts or Assistance?
Hodedah
www.hodedah.com
support @hodedah.com

4
Thank you for purchasing from Hodedah
To learn more about hodedah and our products visit
www.hodedah.com
READ BEFORE BEGINNING ASSEMBLY
- Read each step carefully. It is very important that each step of instruction is performed in the
correct order. If these steps are not followed in sequence, assembly difficulties will occur.
- Make sure all parts are included. Most parts are labeled or stamped on the raw edge.
- Work in spacious area, preferably on a carpet, near the place the unit will be used.
- Do not use power tools to assemble your furniture. Power tools may strip or damage the parts.
HELPFUL HINTS
- Call us if you need assistance.
- Move your new furniture carefully, with two people lift and carry the unit to it's new location.
- Never push, drag or pull your furniture (especially on carpet).
Warranty Information
Hodedah warrants this product to be free from defects in material and workmanship agrees to
remedy any such defect. This warranty covers one year from the date of original purchase. This is
solely limited to be repair or replacement of defective parts and no assembly labor is included.
This warranty does not apply to any product which has been improperly assembled, subjected to
misuse or abuse or which has been altered or repaired in any way.
To obtain warranty, purchaser must present original bill of sale. Components repaired or
replaced warranted through the remainder of the original warranty period only. The defective
components will be repaired or replaced without charge, subject to the terms and conditions
described above.
For help with assembly, identifying parts, product information or to
order parts, please contact us :
Call us at :
718-456-0505
Monday - Friday
9:00am - 5:00pm
Visit our website :
www.hodedah.com
Hodedah
www.hodedah.com
support @hodedah.com

MINIFIX 5654
B
E2 5
STEP 1
APLASTIC DOWEL M8 X 25MM 17
5
Hodedah
www.hodedah.com
support @hodedah.com
- Insert 17 x Plastic dowel (A) into Panels (1), (2) (3), (4), (5) & (6) using a plastic hammer.
- Insert 5 x Minifix 5654 (E2) into the bottom of Panel (7) using a Philips head screwdriver.
- Assemble 4 x Drawer slide 12" (G1) to Panel (3) & (6) with 12 x CB Screw M3.5 x 12m (B) using
Philips head screwdriver.
CB SCREW M3.5 X 12MM
A
1
3
4
2
5
7
BOTTOM VIEW
E2
RIGHT VIEW
B
G1
LEFT VIEW
6
3
12 DRAWER SLIDE 12"
G1 4
6

STEP 2
6
Hodedah
www.hodedah.com
support @hodedah.com
H
D
9
9
CAP
2
1
D
K
H
D
K
4
3
HD
K
2
6
5
JDH
K
- Attach Panel (2) & (5) into Panel (1). Insert 3 x Csk Cap M6 x 40 (D), tighten with Allen key (K) & insert
3 x Cap (H).
- Attach Panel (3) into Panel (2). Insert 1 x Csk Cap M6 x 40 (D), tighten with Allen key (K) & insert 1 x Cap (H).
- Attach Panel (4) into Panel (3) and insert 1 x Csk Cap M6 x 40mm (D), tighten with Allen key (K) & insert
1 x Cap (H).
- Attach Panel (6) into Panel (2), (4) & (5). Insert 4 x Csk Cap M6 x 40 (D), tighten with Allen key (K) & insert
4 x Cap (H).
- Knock 4 x Plastic pin (J) using Hammer into Panel (10 & (6) base.
CSK CAP M6 X 40MM
H
1
1
ALLEN KEY
K
4
PLASTIC PIN
J

STEP 3
7
Hodedah
www.hodedah.com
support @hodedah.com
- Attach panel (7) to Panels (1), (3) & (6), insert 5 x Minifix (E1), tighten with Allen key (K) & insert 5 x Cap (H).
- Attach 4x Panel (9) to Panel (8). Then attach 2 x Panel (10) to Panel (8) using CB screw M4 x 35mm (C)
using Phillips head screwdriver.
- Fix 4 x Drawer slide 12" (G2) into Panel (9) using 12 x CB Screw M3.5 x 12mm (C) & tighten with
Philip head screwdriver.
- Slot 1 x Panel (11) between Panel (9) groove & use 16 x Power nail (I) for fix it. Knock by using a hammer.
E1
POWER NAIL 68"
7
E1 H
K
8
10
9
9
8
10
9
9
I
G2
B
H5
CAP
MINIFIX 5654
E1 5
1
6
3
C16
CB SCREW M4 X 35MM
1
ALLEN KEY
K
I16
B12
CB SCREW M3.5 X 12MM
G2 4
DRAWER SLIDE 12"

STEP 4
8
Hodedah
www.hodedah.com
support @hodedah.com
8
- Fix 2 x Handle (F1) to Panel (8) front. Insert 4 x P/H Screw M4 x 40mm (F2) & tigthen with Phillips head
screwdriver.
- Slide the drawer box into the drawer slide at the Panel (3) & (6).
8
F1 2
HANDLE 2379 (160MM) - PVC P/H SCREW M4X40 4
F2
F1
F2
8
Job Complete !
In the interest of our environment please dispose of all packaging throughtfully.