Hodedah HI822 User manual

ASSEMBLY INSTRUCTIONS
HODEDAH
www.hodedah.com
[email protected]
1
HI822
METAL BED

Breakdown Structure
HODEDAH
www.hodedah.com
[email protected]
GGGGGGG
GGGGGGG
GGGGGGG
GGGGGGG
H
B
H
B
⑩
I
E
F
⑧
⑨
③
④
④
③
⑨
⑧
⑩
E
F
I
J
HB
H
B
②
J
A
A
①
A
A
⑥
⑥C
C
D
C
C
D
○
○
⑤
⑤
⑦
11
11
4

Parts
Hardware
ABolt
4 un.
1/4*95mm
BBolt
4 un.
1/4*60mm
CBolt
4 un.
1/4*45mm
DBolt
2 un.
1/4*30mm
EBolt
4 un.
1/4*26mm
FBolt
4 un.
1/4*23mm
GBolt
28 un.
1/4*16mm
H
4 un.
IBolt
8 un.
J
15*1/4*15mm
Allen Key
2 un.
1/4
1 un.
①Head Board
1 un.
②Foot Board
12 un.
③Bedstead
2 un.
④Bedstead
2 un.
⑤Bed Beam
2 un.
⑥Bedstead
2 un.
⑦Bedstead
2 un.
⑧Bed Beam
2 un.
⑨Bed Beam
2 un.
⑩Connector
6 un.
○Support Leg
HODEDAH
www.hodedah.com
[email protected]
11
5
Anchor

HARDWARE REQUIRED
2*A 2*H 1*J
A
H
①
⑨
⑧
A
H
⑨
⑧
②
2*A 2*H 1*J
HODEDAH
www.hodedah.com
[email protected]
Step 1
·Attach bed beam (8) and (9) to head board (1), insert the small steel plate into groove.
·Insert anchor (H) into the hole on bed beam, thread bolt (A) through head board to attach bed beam.
(see pictures for example)
Step 2
HARDWARE REQUIRED
·Attach bed beam (8) and (9) to foot board (2), insert the small steel plate into groove.
·Insert anchor (H) into the hole on bed beam, thread bolt (A) through foot board to attach bed beam.
(see pictures for example)
6

4*F 4*I 2*J
HODEDAH
www.hodedah.com
[email protected]
HARDWARE REQUIRED
Step 3
·Put head board and foot board together with connector (10).
·Align bed beam holes with connector holes, thread bolt (F) into holes from inside, thread bolt (I)
into holes from outside, attach together with allen key (J). (see pictures for example)
⑩
⑩
Step 4
·Attach bedstead (6) on bed beam (8) and (9), screw bolt (B) through bed beam from outside into
bedstead. (see pictures for example)
4*B 1*J
HARDWARE REQUIRED
B
⑥
⑥
⑥
F
J
J
I⑩
7

4*E 4*I 2*J
HODEDAH
www.hodedah.com
[email protected]
HARDWARE REQUIRED
Step 5
·Attach bedstead (7) on connector (10), screw bolt (E) through connector from outside and screw
bolt (I) from inside, tighten them together with allen key (J).
(see pictures for example)
⑩
Step 6
·Attach bedstead (4) on bed beam (8) and (9), screw bolt (G) into the holes.
(see pictures for example)
4*G 1*J
HARDWARE REQUIRED
⑦
⑦
J
J
⑩
⑦
⑦
E
I
I
E
④
④
⑨
⑧
G
④
8

4*C 2*D 1*J
HODEDAH
www.hodedah.com
[email protected]
HARDWARE REQUIRED
Step 7
·Attach bed beam (5) under bedstead (4) and (7), stand up support leg (11) and put under the bed beam.
·Insert bolt (C) into holes at both ends of bed beam from top after aligning holes.
·Insert bolt (D) into holes at middle of bed beam from top after aligning holes. (see pictures for example)
Step 8
·Attach bedstead (3) to bed beam (8) and (9), insert bolt (G) from upside after aligning all holes.
(see pictures for example)
24*G 1*J
HARDWARE REQUIRED
⑨
⑧
○
11
⑤
C
○
11
⑤D
③
G
○
○
④
④
⑤
⑤
⑦
11
11
9

HODEDAH
www.hodedah.com
[email protected]
Step 9
·Tighten all bolts with allen key (J) after making sure they are in the right position.
10
In the interest of our environment please dispose of all packaging thoughtfully.
Job Complete !