Hodedah HI 29 -A User manual

ASSEMBLY INSTRUCTIONS
HI 29 -A ( WARDROBE )
HODEDAH
www.hodedah.com
[email protected]
1
~ Before assembly, pleas read the instructions ~
~ Keep these instructions for future reference ~ ~ Follow these steps to assemble the chest cabinet~
FRONT VIEW BACK VIEW

2

3

2
1
4
3
5
8
67
HODEDAH
www.hodedah.com
[email protected]
1) Main Unit :
2) Main Unit :
1Top Panel
1Pc
800x425x15mm
2Right Side Panel
1Pc
1800x400x15mm
3Left Side Panel
1Pc
1800x400x15mm
4
4Kick Panels
1Pc
766x70x15mm
5
7
8
5Back Strengthening Panels
2Pcs
766x70x15mm
7Kick Panels
1Pc
766x100x15mm
8Partition Panel
1Pc
766x400x15mm
9
9
12 13
10 Drawer Front Panel
2Pcs
780x238x15mm
9Door Panel
2Pcs
1214x388x15mm
Drawer Side Panel
2Pcs
350x128x15mm
13 Drawer End Panel
2Pcs
709x128x15mm
14 Drawer Base Panel
2Pcs
718x344x2.5mm
99
11
12
13
14 15
16 Back Panels
2Pcs
1770x397x2.5mm
16
16
10
10
4
12
6
Kick Panels
1Pc
766x100x15mm
6
15 Drawer Base Supporting
Panels
2Pcs
335x50x15mm
11
Drawer Side Panel
2Pcs
350x128x15mm
11
11
12 11
12
13
14 15
3
12
10 10
14
14

APVC Dowel
27Pcs BMinifix
6Sets CScrew M4x45mm
24Pcs DScrew M3.5x16mm
48Pcs EScrew M3.5x21mm
12Pcs
FNail
40Pcs
KV - Bracket
2Pcs
JHinges 5/8
4Pcs
IDrawer Slide - A
(350mm)
2Sets
HHandle (96mm)
6Pcs
GAluminium Pipe
(760 x 19mm)
1Pc
LSticker
22Pcs
*Fix On Side Panels
5
ML - Leg
4Pcs

HODEDAH
www.hodedah.com
[email protected]
6
Insert PVC dowel (A) to panel 2, 3, 4, 5, 6, 7, 8, 11 and 12 's non-thru holes as shown, using hammer to gently tap
them in.
A
2
4 3
5
8
67
11
11
12
12
Pre - Assembly
APVC Dowel
27Pcs

HODEDAH
www.hodedah.com
[email protected]
7
D
I
D
K
D
I
2
3
Tighten V-Bracket (K) on panel 2
and 3 as shown by using 2 scews
D. Place the drawer slide (I) at the
predrilled holes on the panel 2 and
3 as shown. Then tighten the
drawer slide(I) with 3 screws (D).
Place the drawer slide (I) at the
panel 2 and 3 as shown. Then
tighten the drawer slide(I) with 2
screws (D).
Pre - Assembly
DScrew M3.5x16mm
16Pcs KV - Bracket
2Pcs IDrawer Slide - A
(350mm)
2Sets

HODEDAH
www.hodedah.com
[email protected]
8
C
2
4
8
57
6
Assembly Instruction Step 1
*Place and fix Panel 4, 5, 6, 7, 8 onto Panel 2 by inserting the (Left)
dowels onto the non-thru holes at Panel 2.
*Using tighten screws (C) from the 5 thru holes of panel 2, one by one.
CScrew M4x45mm
5Pcs
: When inserting the PVC Doweld to non-thru holes, don't push to hard. Otherwise,
the side panels (2 & 3) may be damaged.
CAUTIONS

HODEDAH
www.hodedah.com
[email protected]
9
C
Assembly Instruction Step 2
*Fix Panel 3 onto Panels 4, 5, 6, 7 and 8 by inserting the panel 4, 5, 6, 7
and 8 's dowels onto non-thru holes at Panel 3.
*Using tighten 5 screws (C) from the thru holes of panel 3.
: When inserting the PVC Doweld to non-thru holes, don't push to hard. Otherwise,
the side panels (2 & 3) may be damaged.
CAUTIONS
ML Leg
4Pcs
DScrew M3.5x16mm
8Pcs
CScrew M4x45mm
5Pcs
MD
*Place the L Leg (M) on the two side of Panel 2
and Panel 3. Using tighten 2 screws (D) thru the
holes of L Leg (M) one by one.
3

HODEDAH
www.hodedah.com
[email protected]
10
C
1
CScrew M4x45mm
4Pcs
Assembly Instruction Step 3
-Fix Panel 1 onto panel 2 and 3 and align properly by inserting the 5
dowels of panel 2 ,3 and 4 onto the non thru holes of panel 1.
-Pushing and light tapping of panel 1 to have panel 1, panel 3, panel 2 ,
panel 4 fix tightly.
-Use to tighten screws (C) frm the thru-holes of panel 1.
3
24

HODEDAH
www.hodedah.com
[email protected]
11
F
Assembly Instruction Step 4
FNail
40Pcs
16 16
L
*Cover all the scrrews (C)' head with sticker (M) provided by
stick up onto hole of screw (C)' heads one by one for all the
screw (C). LSticker
5Pcs
C
*Fix 40 x Nails (F) into Panel (16) using a Hammer.

HODEDAH
www.hodedah.com
[email protected]
12
E
H
9
JD
D
Door Panel Assembly Instruction Step 1
*Insert 4 Hinges (J) into door panel 9 's non-thru hole as shown, then
tighten screws (D) through hinges (J) 's thru hole.
*Tighten 2 screw (E)
from inner side of door
panel 9 into the handle
(H) holes.
*Cover all screw (E)'
head with sticker
provided by stick up
onto the hole of screw
(E)' head.
EScrew M3.5x21mm
4Pcs
DScrew M3.5x16mm
8Pcs HHandle
2Pcs LSticker 4Pcs
L
JHinges 5/8
4Pcs
*Remark : Door Panels 9
can use for both sides
(Right door or left door).

HODEDAH
www.hodedah.com
[email protected]
13
B
10
12
15
11
14
10
BMinifix
6Sets
B
Assembly Of Drawers
*Insert the mini fix (B)
*Insert the mini fix (B)(nuts)
with the cross arrow mark
facing upward and aim to
panel 11,12 and 15 's top
thru holes.(As shown)
*Insert Panel 14 into the
drawer and align properly.
(As shown)

HODEDAH
www.hodedah.com
[email protected]
14
13
12
E
H
10
L
C
CScrew M4x45mm
10Pcs
HHandle
4Pcs
LSticker
8Pcs
EScrew M3.5x21mm
8Pcs
*Flip the drawer over.
*Tighten 2 screw (E) from
inner side of panel 10 into
the handle (H) holes.
*Cover all screw (E)'
head with sticker
provided by stick up
onto the hole of screw
(E)' head.
*Place panel 13 on each side of panel 11 and 12 as shown.
*Then, tighten screw (C) to panel 11 's upper thru holes to fix them onto
panel 13.
*Next tighten screw (C) to panel 12 's upper thru holes to fix up to the
panel 13.
*Tighten screw (C) to panel 13 upper thru holes to fix up to the panel 15.
15
11

HODEDAH
www.hodedah.com
[email protected]
15
Adjust
J
K
G
9
9
J
D
D
Assembly Instruction Step 5
*Place aluminiun pipe onto both panel 2 and 3 's V-bracket.
*You can align the
door panel 2 and 3
by tightening and
loosening the screw
as shown.
DScrew M3.5x16mm
16Pcs GAluminium Pipe
(760 X 19mm)
1Pc
JHinges 5/8
4Pcs
*Tighten screw
(D) through
hinges (J)' s thru
hole.

HODEDAH
www.hodedah.com
[email protected]
16
10
10
*Take drawer 10, and slide them (the white roller at drawer slide at both
side of drawers are to go into the track of the slides at each side panel.)
all the way gently, one drawer by one drawer starting from bottom one.
Assembly Instruction Step 6