Hodedah HI5009-Z User manual

ITEM#HI5009-Z
OFFICE CHAIR
1 person
30 mins
1 Box
1 YR LTD
H40.15"W22.4"D17.4"

4
Silver Bolt
Silver Bolt
8
Allen Key
1
Ø6*35mm Ø6*20mm
121
11
15
Chair back
Base
Caster
Gas bar
Plastic cover
Chair arms
1
Metal base
Chair seat

C
A
B
B
A
1
B
2
4
3
8
6
7
5

●
Attach caster (8) to base(6) .(see photos for example)
8
6
Insert plastic cover (7) on base(6).
●
6
7

●
Attach gas bar (5) to base(6) .(see photos for example)
5
6
Attach chair arm(2) on chair back(1), screw 4 X bolt(B) with allen key (C) in the hole
after four holes aligned .(see photos for example)
●
HARDWARE REQUIRED
C
4*B
2
1
C
B

Step 6
●
Attach chair seat (3) on chair arm (2),screw 4 X bolt(A) with allen key (C)in the holes.
(see photos for example)
HARDWARE REQUIRED
C
4*A
C
A
3
2
Attach metal base (4) on bottom of chair seat (3),fix screw 4 X bolt(B) with allen key ©
in the holes after four holes aligned ,then tighten screw.(see photos for example)
●
HARDWARE REQUIRED
C
4*B
B
C
4
3

Step 7
Step 8
Put chair seat (3) on top of gas bar(5), let the gas top into metal base hole, sit on chair
to let gas bar attach together.(see photos for example)
3
4
●
5
●
Tighten all screws after every part is in the right position;