Hoist Fitness V1-PRESS ARM User manual

CATALOG NUMBER
OWNER'S MANUAL
RECORD SERIAL NUMBER HERE
Fax
[phone]
[phone]
[phone]
Note: Both Serial Number and Model Number are Required when Ordering Parts
Customer Service
0907 - 002
V1-PRESS ARM

02
04
10
11
12
13
14
15
17
19
20
21
23
24
OWNER'S MANUAL
PAGE 01 V-1 PRESS ARM ASSEMBLY
INSTRUCTIONS .....................................................................
FRAME ASSEMBLY ..............................................................
PRE-ASSEMBLY....................................................................
DECAL PLACEMENT.............................................................
DECAL REFERENCE.............................................................
PART LIST...............................................................................
ABBREVIATIONS...................................................................
BOLT SIZING CHART............................................................
WASHER SIZING CHART......................................................
MAINTENANCE SCHEDULE.................................................
GENERAL MAINTENANCE INFORMATION........................
WEIGHT TRAINING TIPS.......................................................
EXERCISE LOG......................................................................
LIMITED WARRANTY............................................................
CONTENTS

OWNER'S MANUAL
PAGE 02
V-1 PRESS ARM ASSEMBLY
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
2 People Required For Assembly
TOOLS REQUIRED
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
INSTRUCTIONS

***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
OWNER'S MANUAL
PAGE 03 V-1 PRESS ARM ASSEMBLY

OWNER'S MANUAL
PAGE 04
V-1 PRESS ARM ASSEMBLY
FRAME ASSEMBLY

ASSEMBLY OF PRESS
V BASE MANUAL.
ARM HANGER SHOWN IN
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
*
PAGE 05
OWNER'S MANUAL
V1-PRESS ARM ASSEMBLY
11
2
V BASE UNIT (SELECT
OR ELITE VERSION)
*

11
3
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
OWNER'S MANUAL
V1-PRESS ARM ASSEMBLY PAGE 06

18
3
5
OWNER'S MANUAL
PAGE 07 V1-PRESS ARM ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
FRAME ASSEMBLY

2
12
20
OWNER'S MANUAL
V1-PRESS ARM ASSEMBLY PAGE 08
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.

1
3
OWNER'S MANUAL
PAGE 09 V1-PRESS ARM ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
FRAME ASSEMBLY

OWNER'S MANUAL
V1-PRESS ARM ASSEMBLY PAGE 10
PRE-ASSEMBLY
13
10
4
4
9
16
17
19
7
4
14
10
9
16
17
19
4
10
14
9
16
17
19
7
4
4
13
9
16
17
19
15
66
8
2
3
10 4

PAGE 11 V1-PRESS ARM ASSEMBLY
OWNER'S MANUAL
DECAL PLACEMENT
24
21
22
23

SERIAL # DECAL
021-0003307
021-0003677
021-0003667
PAGE 12
OWNER'S MANUAL
V1-PRESS ARM ASSEMBLY
DECAL REFERENCE

PAGE 13 V1-PRESS ARM ASSEMBLY
OWNER'S MANUAL
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 026-01X0186 PULL-PIN ASSEMBLY 1
2 026-01X5083 PRESS ARM HANGER ASSEMBLY 1
3 026-01X5084 PRESS ARM ASSEMBLY 1
4 011-0111008 SET SCREW: 1/4"-28 X .25" LG. (WZ) 8
5 014-0019005-1 T SPLIT COLLAR THREADED 1.00" I.D. X 20mm 4
6 014-0101005 BUSHING: OILITE FLANGED Ø1.38" O.D. X Ø1.00" I.D. X .81" LG. 2
7 016-0101017 END CAP 2.00" X .120" WALL (GRAY) 2
8 019-0001001 PLUG BUMPER 2
9 026-01M0932 END CAP: ALUMINIUM 1.25" ID 4
10 026-01M0933 ALUMINUM RING: 1.25" ID 4
11 026-01M2267 SHAFT: 1.00" x 9.44" 1
12 026-01P6131 R.O.M. PLATE 1
13 026-01PL0235-12 GRIP OPEN END 1.25" X 4.25" LG. 2
14 026-01PL0235-26 GRIP OPEN END 1.25" X 16.25" LG. 2
15 026-01PL2005 PLUG BUMPER (2 STEM) 1
16 013-0002003 1/4" X 16mm SAE FLAT WASHER (WZ) 4
17 013-0102023 1/4" INTERNAL LOCK WASHER 4
18 011-0007097 1/4"-20UNC X .75" SHCS (BZ) 8
19 011-0101025 1/4"-20UNC X 1.00" BHCB (WZ) 4
20 011-0002049 3/8"-16UNC X .75" FHCS (WZ) W/NYLON PATCH 2
21 021-0003307 DECAL DO NOT HANG (LAT AREA) 1.63" X 2.50" 1
22 021-0003677 DECAL R.O.M. PLATE 1
23 021-0003667 DECAL: V1 BADGE 1
24 SERIAL # DECAL DECAL HOIST SERIAL # 1.63" X 2.63" 1
PART LIST
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED

ABBREVIATIONS
BZ = Black Zinc
WZ = White Zinc
FHCS = Flat Head Cap Screw
BHCS = Button Head Cap Screw
SHCS = Socket Head Cap Screw
HHB = Hex Head Bolt
PAGE 14
OWNER'S MANUAL
V1-PRESS ARM ASSEMBLY

OWNER'S MANUAL
PAGE 15 V1-PRESS ARM ASSEMBLY
5 1/4"4 1/4"
4 3/4"
5"
5 1/2"
4"
4 1/2"
4 3/4"
5"
5 1/2"
4"
4 1/2"
5 1/4"4 1/4"
5 1/4"
5"
5 1/2"
4 1/4"
4"
4 1/2"
4"
4 3/4"
3 1/4"2 1/4"
2 3/4"1 3/4"
1 1/4"
3"
3 1/2"2 1/2"
2 3/4"
3"
3 1/2"2 1/2"
3 1/4"2 1/4"
1 1/2"
1 3/4"
1"
1 1/2"
1"
1 1/4"
2"
2"
5/16" HHB
0"
0"
3/8" HHB
3 1/4"
3"
3 1/2"
2 1/4"
2 1/2"
3 1/4"2 1/4"
2 3/4"
1 1/2"
1"
1 1/4"
1 3/4"
1 1/4"
2"
3 1/2"2 1/2"
3"
1 1/2"
1" 2"
0"
1/2" HHB
0"
1/2" SHSS
2 3/4"1 3/4" 3 3/4"
3 3/4"
3 3/4"
3 3/4"
BOLT SIZING CHART

OWNER'S MANUAL
PAGE 16
V1-PRESS ARM ASSEMBLY
3"
3/8" BHCS
1/4" HHB
0" 1"
1 1/4"
3/4"
1 1/2"
0"
1"
0"
1/2" FHCS
0"
3/8" FHCS
3/8" SHCS
1 3/4" 2 3/4"3/4"
1 1/4"
3/4"
0" 1"
2 1/4"
1 1/2"
2"
2 1/2"
1"
3/4"
3/4"
(CONTINUED)
BOLT SIZING CHART

OWNER'S MANUAL
PAGE 17 V1-PRESS ARM ASSEMBLY
013-0002003
1/4"
FLAT WASHER
SMALL, SAE, 13mm
013-0102026
1/2"
FLAT WASHER
LARGE, USS, 34mm
014-0018001
1/2" LONG
SPACER
3/8" FENDER WASHER
013-0003002
PLASTIC 1 1/16"
026-01PL151
FENDER WASHER
013-0402005
3/8"
FLAT WASHER
LARGE, USS, 25mm
013-0002004
3/8"
FLAT WASHER
SMALL, SAE, 21mm
013-0102020
3/8"
LOCK WASHER
1" SHIM WASHER
016-0009003
013-0102019
1/4"
LOCK WASHER
026-01M0238
2" ALUMINUM
FLATHEAD CAP
013-0102028
3/8"
CURVED WASHER
013-0102004
5/16"
FLAT WASHER
LARGE, USS, 22mm
013-0402007
3/8"
FLAT WASHER
22mm O.D.
1 1/16"
013-0003004
FENDER WASHER
014-0018002
1" LONG
SPACER
013-0102003
1/2"
FLAT WASHER
SMALL, SAE, 27mm
013-0102018
1/2"
LOCK WASHER
WASHER SIZING CHART

OWNER'S MANUAL
PAGE 18
V1-PRESS ARM ASSEMBLY
026-01M0211
1/4" LONG
FLANGED SPACER
026-01M0198
1/2" LONG
FLANGED SPACER
026-01M0760
1/2" LONG HEAVY
FLANGED SPACER
026-01M211T
1/4" LONG HEAVY
FLANGED SPACER
026-01M0532
11/16" LONG HEAVY
FLANGED SPACER
026-01M0551
1" LONG HEAVY
FLANGED SPACER
026-01M0788
.81" LONG HEAVY
FLANGED SPACER
026-01M0780
.65" LONG HEAVY
FLANGED SPACER
026-01M0761
1 11/16" LONG HEAVY
FLANGED SPACER
026-01M0789
.44" LONG HEAVY
FLANGED SPACER
026-01M0762
1 1/2" LONG HEAVY
FLANGED SPACER
026-01M0768
1 1/4" LONG HEAVY
FLANGED SPACER
026-01M0239
1 5/8" ALUMINUM
FLATHEAD CAP
026-01M0240
1 3/8" ALUMINUM
FLATHEAD CAP
026-01M0600
.625" LONG
FLANGED SPACER
WASHER SIZING CHART
(CONTINUED)

OWNER'S MANUAL
PAGE 19 V1-PRESS ARM ASSEMBLY
Your equipment comes with a commercial maintenance decal.
For personal, in home use, please follow the home maintenance schedule listed above.
COMMERCIAL
MAINTENANCE
DAILY
DAILY
WEEKLY
WEEKLY
WEEKLY
DAILY
HOME
MAINTENANCE
WEEKLY
WEEKLY
WEEKLY
3 MONTHS
3 MONTHS
3 MONTHS
Clean;
Upholstery
Inspect;
Links, Pull Pins, Snap Locks,
Swivels, Weight Stack Pins
ROUTINE
Inspect;
All Decals
Inspect;
Accessory Bars, and Handles
Inspect;
Cables or Belts and their
tension
Inspect;
All Nuts and Bolts, Tighten if needed
MAINTENANCE SCHEDULE
WEEKLY
MONTHLY
MONTHLY
YEARLY
6 MONTHS
6 MONTHS
3 MONTHS
3 MONTHS
3 MONTHS
YEARLY
3 YEARS
YEARLY
Inspect;
Anti-Skid Surface
Clean and Wax;
All Glossy Finishes
Repack with Grease;
Linear Bearings
Clean & Lubricate;
Guide Rods with a Teflon (PTFE)
based lubricant (Superlube)
Lubricate;
Seat Sleeves, Turcite Bushings,
Linear Bearing
Replace;
Cables, Belts and Connecting Parts
LATEST DATE ENTRY