Hoist Fitness CF-3172 User manual

CATALOG NUMBER
OWNER'S MANUAL
RECORD SERIAL NUMBER HERE
Fax
[phone]
[phone]
[phone]
Note: Both Serial Number and Model Number are Required when Ordering Parts
Customer Service
0507 - 000
CF-3172
OLYMPIC INCLINE BENCH

02
04
05
10
11
12
13
14
16
18
19
20
21
22
OWNER'S MANUAL
PAGE 01 CF-3172 ASSEMBLY
INSTRUCTIONS .....................................................................
ASSEMBLED SHIPPING POSITION.....................................
FRAME ASSEMBLY ..............................................................
DECAL PLACEMENT.............................................................
DECAL REFERENCE.............................................................
PART LIST...............................................................................
ABBREVIATIONS...................................................................
BOLT SIZING CHART............................................................
WASHER SIZING CHART......................................................
MAINTENANCE SCHEDULE.................................................
GENERAL MAINTENANCE INFORMATION........................
WEIGHT TRAINING TIPS.......................................................
EXERCISE LOG......................................................................
LIMITED WARRANTY............................................................
CONTENTS

OWNER'S MANUAL
PAGE 02
CF-3172 ASSEMBLY
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
TOOLS REQUIRED
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
INSTRUCTIONS

***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
OWNER'S MANUAL
PAGE 03 CF-3172 ASSEMBLY

OWNER'S MANUAL
PAGE 04
CF-3172 ASSEMBLY
ASSEMBLED SHIPPING POSITION
ITEM NO. PART NUMBER DESCRIPTION QTY.
25 013-0102003 1/2" X 27mm SAE FLAT WASHER (WZ) 8
26 012-0304011 1/2"-13 UNC THIN NYLOCK NUT (WZ) 4
27 011-0107045 1/2"-13UNC X 1.25" HHB (WZ) 4
28 026-01X4022 CF OLYMPIC BENCH SHIPPING ADAPTER 1
27
25
28
25
22 25
11
26
25
26
*
*
*
*
*
OLYMPIC BENCH SHIPPING
ADAPTER KIT (ALL PARTS ARE
TO BE DISCARDED AFTER
SHIPMENT AND SERVE NO
OTHER PURPOSE.)
* DISCARD PARTS BELOW*
NOTE:
IF PURCHACED ASSEMBLED, MACHINE MAY•
ARRIVE IN THIS ASSEMBLED SHIPPING
POSITION.
REMOVE HARDWARE SHOWN AND PROCEED•
TO PAGE 6 FOR REASSEMBLY.
DISCARD ALL HARDWARE NOTED WITH .•*

OWNER'S MANUAL
CF-3172 ASSEMBLYPAGE 05
FRAME ASSEMBLY

*
OWNER'S MANUAL
PAGE 06
CF-3172 ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- REFER TO CF-OLYMPIC BENCH
UPRIGHTS MANUAL FOR CAGE
ASSEMBLY.
FOLLOW DETAILED DRAWING
FOR CORRECT PLACEMENT
OF ANGLED PULL PIN FACE.
FRAME ASSEMBLY
*
3
21
9
4
22
25 2
12
26
2511
1
14
20
8

OWNER'S MANUAL
PAGE 07 CF-3172 ASSEMBLY
5
6
17
16
13
4
NOTE:
- WRENCH TIGHTEN HARDWARE.
FRAME ASSEMBLY
23
24

OWNER'S MANUAL
PAGE 08
CF-3172 ASSEMBLY
23
24
7
15
NOTE:
- WRENCH TIGHTEN HARDWARE.
FRAME ASSEMBLY

NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS HAVE BEEN
REMOVED FOR CLARITY.
- RACK OUTS MUST ONLY BE
USED WITH SPECIFIED BENCH.
ITEMS REFERENCED AND
ASSEMBLED IN CF-OLYMPIC
BENCH UPRIGHTS MANUAL.
FRAME ASSEMBLY
*
OWNER'S MANUAL
PAGE 09 CF-3172 ASSEMBLY
*
10
* *
*
10
*

DECAL PLACEMENT
OWNER'S MANUAL
PAGE 10
CF-3172 ASSEMBLY
19
19
18
27

DECAL REFERENCE
OWNER'S MANUAL
PAGE 11 CF-3172 ASSEMBLY
021-0003230
021-0004101
SERIAL # DECAL

ITEM NO. PART NUMBER DESCRIPTION QTY.
1 CF OLYMPIC BENCH UPRIGHTS OLYMPIC BENCH UPRIGHTS 1
2 026-01X3189 SEAT ADJUSTER ASSEMBLY 1
3 026-01X3160 RACHET PULL-PIN ASSEMBLY 1
4 026-01X4013 BASE ASSEMBLY 1
5 022-01PD2205-A HEAD PAD ASSEMBLY 1
6 022-01PD2207-A BACK PAD ASSEMBLY 1
7 022-01PD2099-A SEAT PAD ASSEMBLY 1
8 016-0001003 END CAP 1.50" X 2.50" (BLACK) 1
9 026-01M2279 END CAP FLAT 2
10 026-01P3418 INCLINE RACKOUT 2
11 026-01P3548 .125" BRACKET PLATE 1
12 026-01PL0125-125 E-Z GLIDE PLASTIC SLEEVE 2
13 026-01PL2179 PLASTIC SCUFF GUARD 2
14 026-01PL2211-B RUBBER FOOT 1
15 026-01PL2234 SEAT PAD PLASTIC BACKING 1
16 026-01PL2305 HEAD PAD PLASTIC BACKING 1
17 026-01PL2309 BACK PAD PLASTIC BACKING 1
18 021-0004101 DECAL ADJUST 1-8 VERTICAL 1
19 021-0003230 DECAL HOIST 1.63" X 5.93" 2
20 011-0311013 3/8-16UNC X .75" SQUARE HEAD (WZ) 1
21 011-0002048 3/8"-16UNC X 1.25" FHCS (WZ) W/NYLON PATCH 2
22 011-0101070 1/2"-13UNC X 4.00" HHB (WZ) 4
23 011-0107011 5/16"-18UNC X 1.25" HHB (WZ) 11
24 013-0302008 5/16" SAE FLAT WASHER (WZ) 11
25 013-0102003 1/2" X 27mm SAE FLAT WASHER (WZ) 8
26 012-0304011 1/2"-13 UNC THIN NYLOCK NUT (WZ) 4
27 SERIAL # DECAL DECAL HOIST SERIAL # 1.63" X 2.63" 1
PART LIST
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
OWNER'S MANUAL
PAGE 12CF-3172 ASSEMBLY

BZ = Black Zinc
WZ = White Zinc
HHB = Hex Head Bolt
FHCS = Flat Head Cap Screw
BHCS = Button Head Cap Screw
SHCS = Socket Head Cap Screw
SHSS = Socket Head Shoulder Screw
ABBREVIATIONS
OWNER'S MANUAL
PAGE 13 CF-3172 ASSEMBLY

BOLT SIZING CHART
OWNER'S MANUAL
PAGE 14CF-3172 ASSEMBLY
5 1/4"4 1/4"
4 3/4"
5"
5 1/2"
4"
4 1/2"
4 3/4"
5"
5 1/2"
4"
4 1/2"
5 1/4"4 1/4"
5 1/4"
5"
5 1/2"
4 1/4"
4"
4 1/2"
4"
4 3/4"
3 1/4"2 1/4"
2 3/4"1 3/4"
1 1/4"
3"
3 1/2"2 1/2"
2 3/4"
3"
3 1/2"2 1/2"
3 1/4"2 1/4"
1 1/2"
1 3/4"
1"
1 1/2"
1"
1 1/4"
2"
2"
5/16" HHB
0"
0"
3/8" HHB
3 1/4"
3"
3 1/2"
2 1/4"
2 1/2"
3 1/4"2 1/4"
2 3/4"
1 1/2"
1"
1 1/4"
1 3/4"
1 1/4"
2"
3 1/2"2 1/2"
3"
1 1/2"
1" 2"
0"
1/2" HHB
0"
1/2" SHSS
2 3/4"1 3/4" 3 3/4"
3 3/4"
3 3/4"
3 3/4"

3"
3/8" BHCS
1/4" HHB
0" 1"
1 1/4"
3/4"
1 1/2"
0"
1"
0"
1/2" FHCS
0"
3/8" FHCS
3/8" SHCS
1 3/4" 2 3/4"3/4"
1 1/4"
3/4"
0" 1"
2 1/4"
1 1/2"
2"
2 1/2"
1"
3/4"
3/4"
(CONTINUED)
BOLT SIZING CHART
OWNER'S MANUAL
PAGE 15 CF-3172 ASSEMBLY

013-0002003
1/4"
FLAT WASHER
SMALL, SAE, 13mm
013-0102026
1/2"
FLAT WASHER
LARGE, USS, 34mm
014-0018001
1/2" LONG
SPACER
3/8" FENDER WASHER
013-0003002
PLASTIC 1 1/16"
026-01PL151
FENDER WASHER
013-0402005
3/8"
FLAT WASHER
LARGE, USS, 25mm
013-0002004
3/8"
FLAT WASHER
SMALL, SAE, 21mm
013-0102020
3/8"
LOCK WASHER
1" SHIM WASHER
016-0009003
013-0102019
1/4"
LOCK WASHER
026-01M0238
2" ALUMINUM
FLATHEAD CAP
013-0102028
3/8"
CURVED WASHER
013-0102004
5/16"
FLAT WASHER
LARGE, USS, 22mm
013-0402007
3/8"
FLAT WASHER
22mm O.D.
1 1/16"
013-0003004
FENDER WASHER
014-0018002
1" LONG
SPACER
013-0102003
1/2"
FLAT WASHER
SMALL, SAE, 27mm
013-0102018
1/2"
LOCK WASHER
WASHER SIZING CHART
OWNER'S MANUAL
PAGE16CF-3172 ASSEMBLY

026-01M0211
1/4" LONG
FLANGED SPACER
026-01M0198
1/2" LONG
FLANGED SPACER
026-01M0760
1/2" LONG HEAVY
FLANGED SPACER
026-01M211T
1/4" LONG HEAVY
FLANGED SPACER
026-01M0532
11/16" LONG HEAVY
FLANGED SPACER
026-01M0551
1" LONG HEAVY
FLANGED SPACER
026-01M0788
.81" LONG HEAVY
FLANGED SPACER
026-01M0780
.65" LONG HEAVY
FLANGED SPACER
026-01M0761
1 11/16" LONG HEAVY
FLANGED SPACER
026-01M0789
.44" LONG HEAVY
FLANGED SPACER
026-01M0762
1 1/2" LONG HEAVY
FLANGED SPACER
026-01M0768
1 1/4" LONG HEAVY
FLANGED SPACER
026-01M0239
1 5/8" ALUMINUM
FLATHEAD CAP
026-01M0240
1 3/8" ALUMINUM
FLATHEAD CAP
026-01M0600
.625" LONG
FLANGED SPACER
WASHER SIZING CHART
(CONTINUED)
OWNER'S MANUAL
PAGE 17 CF-3172 ASSEMBLY

Your equipment comes with a commercial maintenance decal.
For personal, in home use, please follow the home maintenance schedule listed above.
COMMERCIAL
MAINTENANCE
DAILY
DAILY
WEEKLY
WEEKLY
WEEKLY
DAILY
HOME
MAINTENANCE
WEEKLY
WEEKLY
WEEKLY
3 MONTHS
3 MONTHS
3 MONTHS
Clean;
Upholstery
Inspect;
Links, Pull Pins, Snap Locks,
Swivels, Weight Stack Pins
ROUTINE
Inspect;
All Decals
Inspect;
Accessory Bars, and Handles
Inspect;
Cables or Belts and their
tension
Inspect;
All Nuts and Bolts, Tighten if needed
MAINTENANCE SCHEDULE
WEEKLY
MONTHLY
MONTHLY
YEARLY
6 MONTHS
6 MONTHS
3 MONTHS
3 MONTHS
3 MONTHS
YEARLY
3 YEARS
YEARLY
Inspect;
Anti-Skid Surface
Clean and Wax;
All Glossy Finishes
Repack with Grease;
Linear Bearings
Clean & Lubricate;
Guide Rods with a Teflon (PTFE)
based lubricant (Superlube)
Lubricate;
Seat Sleeves, Turcite Bushings,
Linear Bearing
Replace;
Cables, Belts and Connecting Parts
LATEST DATE ENTRY
OWNER'S MANUAL
PAGE 18CF-3172 ASSEMBLY

HOIST FITNESS SYSTEMS
GENERAL MAINTENANCE INFORMATION
Links, Pull-Pins, Snap Hooks, Swivels, Weight Stack Pins:
*Check all pieces for signs of visible wear or damage.
*Check springs in snap hooks and pull-pins for proper tension and alignment.
*If the spring sticks or has lost its rigidity, replace it immediately.
Upholstery:
*To ensure prolonged upholstery life and proper hygiene, all upholstered pads should be wiped down with a damp cloth after every workout.
*Periodically take the time to use a mild soap or an approved vinyl upholstery cleaner to deter the onset of cracking or drying. Avoid using any
abrasive cleaners or cleaners not intended for use on vinyl.
*Replace ripped or warn upholstery immediately.
*Keep sharp or pointed objects clear of all upholstery.
Decals:
*Inspect and familiarize yourself with any safety warnings or other user information posted on each decal.
Nuts and Bolts:
*Inspect all nuts and bolts for any loosening and tighten if needed.
*Go through a re-tightening sequence periodically to ensure that all hardware is tensioned proper.
Anti-Skid Surfaces:
*These surfaces are designed to supply secure footing and need to be replaced if they appear worn or become slippery.
Belts and Cables:
*Hoist uses only high quality belt, and mil-spec cables.
*Visually inspect the belts and cables for fraying, cracking, peeling or discoloration.
*While the machine is not in use, carefully run your fingers along the belt or cable to feel for thinning or bulging areas.
*Replace belts and cables immediately at the first signs of damage or wear. Do not use equipment until belts or cables have been replaced.
Belt and Cable Tension:
*Referring to the Owners Manual, when belts or cables are used check all bolts attachments to be sure they are properly attached.
*Check slack in cables and re-adjust cable tension if needed.
Seat Sleeves, Guide Rods:
*Wipe down adjusting tubes with a dust free rag before applying lubricant.
*Lubricate seat sleeves and Guide Rods with a Silicon or Teflon based lubricant spray.
Linear Bearings:
*Referring to the Owners Manual carefully disassemble the bearing from its housing and place a finger full of light grease (lithium, super lube,
etc.) into the inside of the bearing. Using your finger, press the grease into the ball-bearings and their tracks. repeat until the ball-bearing
tracks are full of grease. Insert the shaft back into the bearing and wipe off excess grease.
PLEASE KEEP THIS FOR YOUR RECORDS
OWNER'S MANUAL
PAGE19 CF-3172 ASSEMBLY