HOLLY&MARTIN CK764100TX User manual

CK764100TX
Lavrock Cocktail Trunk – Black
Assembly Instruction
Holly & Martin® a valued brand of SEI
Customer Service 1-800-633-5096
[email protected]
www.hollyandmartin.com
Page 1

CK764100TX
Lavrock Cocktail Trunk – Black
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Using a screw that is too long
will cause damage. Before beginning assembly, separate each type of screw.
Carefully study the
diagrams below. You may receive e tra hardware with your unit.
A
1pc
Wood Top
B 1pc
Left Panel
C 1pc
Right Panel
D 1pc
Bottom Panel
E 1pc
Front Panel
F 1pc
Back Panel
G 4pcs
Leg
1 18pcs
Cam Bolt: ∮ 1/4”x1-1/2”
2 18pcs
Cam Lock: ∮ 5/8”x1/2”
3 8pcs
Wood Dowel :5/16” x1-1/4”
4 8pcs
Bolt : ∮ 1/4”x1-1/2”
5 1pc
Allen wrench :1/4”
Page 2

6 1pc
Left-Support
7 1pc
Right-Support
8 8pcs
Screw: ∮ 1/8”x1/2”
9 3pcs
Hinge
10 24pcs
Screw: ∮3x15mm
11 2pcs
Adhesive Pad
12 8pcs
PVC cover
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Please call manufacturer for assistance,
questions or parts.
Assembly Tool Required
No.2 Phillips Screwdriver
(Not included)
Page 3

CK764100TX
Lavrock Cocktail Trunk – Black
Assembly Instructions
Figure 1
Unpack and lay parts on
clean, padded surface like
carpet or blanket. Check
that you have all parts
indicated on the front page
Insert cam locks (2) into
predrilled holes on bottom
panel (D). Screw cam bolt (1)
into pre-drilled holes on left
panel (B) .Attach bottom panel
(D) to left panel (B) by inserting
cam bolt (1) into corresponding
pre-drilled holes until left panel
(B) &bottom panel (D) meet.
Secure by rotating cam lock (2)
clockwise with Phillips
screwdriver (not included).
Repeat above procedure to
attach right panel (C) &
bottom
panel (D).
Figure 2
Insert cam locks (2) into
predrilled holes on the
pre-assembled parts in figure 1.
Screw cam bolt (1) into
predrilled holes on front panel
(E). Attach front panel(E) using
wood dowel (3)& cam bolt (1)
into corresponding predrilled
holes until pre-assembled parts
in figure 1 & front panel (E)
meet.
Secure by rotating cam lock (2)
clockwise with Phillips
screwdriver. Cover camlock
holes with 4pcs PVC cover (12).
(2)
(1)
"Please do not over tighten cam bolts. Please stop
when you feel tight"
Page 4

Figure 3
Repeat above procedure to
attach back panel (F) to
pre-assembled unit in figure 2.
Figure 4
Attach leg (G) to bottom panel
(D) using bolt (4) and tighten
with Allen wrench (5)
Page 5

Figure 5
Attach hinge (9) to back panel
(F) & inside of wood top (A)
using 24pcs screw (10) as
shown in figure 5.
Figure 6
Open the top (A), attach
support (6&7) to inside of top
(A) and trunk base using 8pcs
screw (8) and tighten with
Phillips screwdriver.
Stick 2pcs adhesive pad (11) on
top edge of front Panel (E) as
Shown in figure 6. Slowly drop
top (A) close the unit.
With assistant from another
person, please lift from the
bottom when moving the trunk.
Page 6

Figure 7
Now your Lavrock Cocktail
Trunk - Black is ready for use
Top panel support up to 50
lbs
Inside support up to 70 lbs

Parts Replacement Form
Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service
1-800-633-5096
[email protected]
www.hollyandmartin.com
600 Freeport Parkway, Suite 200
Coppell
, Texas
75019
Page 8