HOLLY&MARTIN MS995900TX User manual

1
For assistance with assembly contact:
Holly & Martin® a valued brand of SEI
Customer Service 1-800-633-5096
[email protected]
www.hollyandmartin.com
MS995900TX
Media Console

2
Care and Cleaning Instructions:
Before using, wipe with a clean , dry cloth.
Periodically apply furniture wax to renew
The nish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Do not return product to store. Please call
manufacturer for assistance, questions or
parts.
MS995900TX
Media Console
Assembly Instructions
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study
the screw diagrams below. You may receive extra hardware with your unit.
※ MAX. LOADING CAPACITY IS 175 LBS FOR TOP PANEL, 20 LBS FOR FIXED SHELF,
15 LBS PER ADJUSTABLE SHELF.
a. Wood Dowel
∅6mmx25mm
d. Cam Lock
∅15mmx9mm
g. Hex Screw
∅6mmx31mm
j. Hex Spanner
∅4mmx57mmx21mm
m. Connector
100mmx63mm
x35mm
b. Cam Lock Dowel
∅6.2mmx32mm
e. Screw
∅3mmx16mm
h. Panel Holder
∅6mmx19mm
k. Black
Door Handle
80mmx33mm
x28mm
n. Metal Stands
395mmx75mm
x130mm
c. Flat Head Screw
∅3mmx12mm
f. Metal Plate
16mmx10mm
i. Screw
∅5mmx13mm
l. Screw
∅4mmx12mm
o. Metal Stands
385mmx16mm
x16mm
Quantity
Of 20
Quantity
Of 20
Quantity
Of 8
Quantity
Of 1
Quantity
Of 4
Quantity
Of 20
Quantity
Of 24
Quantity
Of 8
Quantity
Of 2
Quantity
Of 4
Quantity
Of 24
Quantity
Of 6
Quantity
Of 16
Quantity
Of 4
Quantity
Of 4
Tool required: Phillips screw driver
(Not Included)

3
For assistance with assembly contact:
Holly & Martin® a valued brand of SEI
Customer Service 1-800-633-5096
[email protected]
www.hollyandmartin.com
CAM LOCK INSTRUCTION:
THIS ITEM IS ASSEMBLED WITH CAM LOCK SET.
--SCREW CAM LOCK DOWEL INTO PANEL II.
--INSERT CAM LOCK INTO PRE-DRILLED HOLE IN PANEL I, AND
--ROTATE CAM LOCK UNTIL ARROW IS IN LINE WITH HOLE ON PANEL EDGE.
--ALIGN CAM LOCK DOWEL TO CAM LOCK HOLE ON PANEL I, AND PRESS
PANELS I & II TOGETHER.
--LOCK PANELS TOGETHER BY TURNING CAM LOCK CLOCKWISE UNTIL
TIGHT.
NOTE :
FOLLOW INSTRUCTIONS LISTED BELOW IN THE PROPER SEQUENCE AS NUMBERED TO ASSURE
FAST, EASY AND CORRECT ASSEMBLY. HOUSE HOLD GLUE SUGGESTED FOR WOOD DOWEL.(eg.
ELMERS GLUE, NOT PROVIDED).SOLID ARROW MARK POINTS AT FRONT SIDE OR UP DIRECTION.
PHILLIP SCREW DRIVER IS REQUIRED(NOT PROVIDED).TWO PERSONS ARE RECOMMENDED TO
ASSEMBLE THIS ITEM.
CAM LOCK
CAM LOCK DOWEL
PANEL EDGE
PANEL II
PANEL I
CAM LOCK INSTRUCTION
PARTS LIST:
NO DESCRIPTION QTY NO DESCRIPTION QTY
ABottom Panel 1 J Left Door 1
BLeft/Right Inner Panel 2 K Right Door 1
CMiddle Panel 1
DLeft/Right Side Panel 2
ETop Panel 1
FRight Back Panel 1
GMiddle Back Panel 1
HLeft Back Panel 1
IAdjustable Panel 2
MS995900TX
Media Console

4
Step 1:
Assemble the metal stands
(n) and (o) using screws (i)
as shown in Figure 1.
Step 2:
Use Allen wrench (j) and
hex screws (g) to attach
the metal stands to Bottom
Panel (A).
Customer Service 1-800-633-5096
[email protected]
Holly & Martin® a valued brand of SEI
600 Freeport Pkwy Ste: 200
Coppell, Texas 75019
Figure 1
MS995900TX
Media Console
Assembly Instructions

5
Step 1:
Insert cam lock dowels (b)
through Left/Right Inner
Panel (B).
Step 2:
Insert cam locks (d) into
Middle Panel(C), and
connect Left/Right Inner
Panel(B) and Middle Panel
(C) using wood dowels (a) .
Step 3:
Insert cam lock dowels (b) to
Bottom Panel (A) as shown
in Figure 2.
Figure 2
MS995900TX
Media Console
Assembly Instructions

6
Step 1:
Insert cam lock (d) as shown
in Figure 3.
Step 2:
Assemble Left/Right Side
Panels (D) Left/Right Inner
Panels(B) and Bottom Panel
(A) using wood dowels(a)
as shown in Figure 3.
Figure 3
MS995900TX
Media Console
Assembly Instructions

7
Step 1:
Insert cam lock dowels (b)
into Top Panel (E)
Step 2:
Insert cam locks (d) into Left/
Right Inner and Side Panels
(B) (D).
Step 3:
Assemble Top Panel (E)
using wood dowels (a) as
shown in Figure 4.
Figure 4
MS995900TX
Media Console
Assembly Instructions

8
Step 1:
Tighten the Right Middle and
Left back Panels (F) (G) (H)
using installing screws (e)
through metal plate (f).
Figure 5
MS995900TX
Media Console
Assembly Instructions

9
Step 1:
Insert panel holder (h) as
shown in Figure 6.
Step 2:
Place Adjustable Panels (I)
on panel holders (h).
Step 3:
Install the black door
handles (k) on both door
using screws.
Step 4:
T ighten the door
hardware as shown in
Figure 6.
Figure 6
MS995900TX
Media Console
Assembly Instructions

10
CAUTION
The top shelf is intended for a at screen television with a maximum
overall width of 50” and supports up to 175 lb.
The top shelf is NOT INTENDED for tube televisions.
Each center shelf should not be loaded with more than 20 lb. Each side
shelf should not be loaded with more than 15 lb.
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing
possible injury.
This unit contains a permanent warning sticker located on back panel.
Do not allow children under 16 years to move the cart.
Model: MS995900TX
Media Console
Holly & Martin® a valued brand of SEI
600 Freeport Parkway,
Suite 200 Coppell, Texas, 75019
Manufacture Date: 06/15/2013

11
Parts Replacement Form
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be
honored within this time frame. Parts will not be available for items arriving fully assembled. We do
not recommend modifying product(s) and we are not responsible for any damages due to product
modication(s). If damages or missing parts are not reported within 90 days of your receipt, we are under
no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at [email protected]. Please ask for customer
service representative for issues involving damages or replacement parts. Please ask for technical
assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Service
1-800-633-5096
[email protected]
Holly & Martin® a valued brand of SEI
600 Freeport Parkway, Suite 200
Coppell, Texas 75019