Home Accents Holiday 691824 User manual

Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always be
followed including the following:
a) READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b)This product is for indoor use only. The electrical rating 0.5 A 120 V 60
Hz.
c) Do not use seasonal products outdoors unless marked suitable for
indoorandoutdoor use. Whenproductsareused in outdoor applications,
connect the producttoaGroundFaultCircuitInterrupting(GFCI)outlet.If
one is not provided, contact a qualified electrician for proper installation.
d)This seasonal use product is not intended for permanent installation or
use.
e)Donotmountorplaceneargasorelectricheaters,fireplace,candlesor
other similar sources of heat.
f)Do not secure the wiring of the product with staples or nails, or place on
sharp hooks or nails.
g)Do not let lamps rest on the supply cord or on any wire.
h)Unplug the product when leaving the house, when retiring for the night,
or if left unattended.
i)This is an electric product – not a toy! To avoid risk of fire, burns
personal injury and electric shock it should not be played with or placed
where small children can reach it.
j)Do not use this product for other than its intended use.
k)Do not hang ornaments or other objects from cord, wire, or light string.
l)Donotclosedoorsorwindowsontheproductorextensioncordsasthis
may damage the wire insulation.
m) Do not cover the product with cloth, paper or any material not part of
the product when in use.
n)This product is equipped with push-in type lamps. Do not twist lamps.
o)Readand followall instructions that are on the product orprovided with
the product.
p) SAVE THESE INSTRUCTIONS.
Pre-Assembly
Package Contents
Part
Description
Quantity
A
Tree top
1
B
Tree center
1
C Tree bottom 1
D
Tree stand
1
E
Foot pedal switch
1
F
Adaptor
1
7.5’ Yukon SpruceColor Changing
Quick Set Tree
SKU# 691824
Assembly
Assembling the tree stand
Step 1. Choose a location near a wall outlet.
Step2.Openthestandtoa90degreeangleuntiltheholelinesupwiththe
hole on the tube.
Step 3. Screw an eye bolt into the hole.
Assembling the tree
Please remove protective covers from the base of the pole for each tree
section before assembling.
Step 1. Inserttreebottom(C)intothetree stand(D)andtightenthe screw.
(See Fig. 1)
Step 2. Insert tree center (B) into the tree bottom (C). (See Fig. 2)
Rotate tree center (B) slightly to ensure it matches the tree
bottom (C) and there is proper circuit connection if lights are not
functioning.
Step 3Insert the tree top (A) into the tree center (B). (See Fig. 3)
Rotate the tree top (A) slightly to ensure it matches the upper
middle section (B) and there is proper circuit connection if lights
are not functioning.
Step 4. Insert the provided foot pedal switch and adaptor separately into
the tree bottom (C) according to the magnified drawing (See Fig.
4).
Step 5. Allowbranchestofallintoplaceor gentlypullbranchesupandout.
Whenadjustingbranchesbesure thatallwiresarefreeofbranch
hinges. (See Fig. 5)
Step 6. Shape the branches. Starting with tips closest to the pole, shape
one tip to the right, one to the left and one at the center of the
main stem. Repeat pattern for each branch. (See Fig. 6)
Step 7. This tree is color changing – just press the button on the foot
pedal switch for changing functions. The 8 lighting options
available are, Steady Warm White, Warm White rippling,
Steady Multi, Multi Rippling, Color Changing, Warm White
Cascade then Multi cascade, Color Changing Cascade and
Magician.

Operation
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any loose, broken
bulbs and /or missing bulbs. Replace bulbs promptly with the
replacement bulbs provided in order to maintain the performance and life
expectancy of your tree.
Step1. Connecteachtreesectionwellandplugthepowercordintoawall
outlet.
Maintenance
Replacing the low-voltage lamps
1. Grasp plug and remove from its power source.
2. Remove the reflector of the bulb.
3. Pull bulb straight out of socket. Do not twist bulb.
4. Replace burned-out bulb with 3.0 volt, 0.06 watt LEDbulb ONLY.
Directly insert the LED bulb into the lampholder.
5. If the bulb doesn’t light up, change the LED bulb’s direction to insert
into the lampholder (replacement bulbs are provided).
6. Insert the reflector into the bulb.
CAUTION! – ALWAYS UNPLUG YOUR
TREE FROM ITS POWER SOURCE BEFORE
ATTEMPTING BULB REPLACEMENT.
Care and Cleaning
Step 1. Remove all ornaments and decorations.
Step 2. Unplug the plug cord from the wall outlet.
Step 3. Gently lift the tree top straight up to remove from the center
section and fold all branches towards the pole.
Step 4. Repeat this step for the center and bottom tree sections.
Step 5. Carefully place all tree sections into a shipping box and tape it
shut.
Step 6. Store your tree in a cool, dry place away from sunlight.
Troubleshooting
Problem
Solution
The tree
does not
light
Ensure that all tree sections are plugged into each
other and that the tree is plugged into the wall outlet.
Make sure the foot pedal switch and adaptor are well
connected to the bottom section (C).
Check for loose, broken, or missing bulbs and replace
as needed with the replacement bulbs provided.
If you are still experiencing problems with the tree
please call 1-877-527-0313 for instructions.
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.