Home Accents Holiday TINSEL DONKEY 22RT2062214 User manual

SKU # 1007 581 034
Model # 22RT2062214
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 42in 100 Light Warm White LED TINSEL
DONKEY. We strive to continually create quality products designed to
enhance your home. Visit us online to see our full line of products available
for your home improvement needs. Thank you for choosing HomeAccents!
1-855-HDHoliday (1-855-434-6543)
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
42in 100 Light Warm White LED
TINSELDONKEY
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many
parts are connected by the lighting string that runs throughout the item. Take special
care not to pull, cut or damage the lighting string. Read the entire manual prior to
assembly and identify all the parts included in the package against the parts list. It is
recommended to assemble parts of the product while laying flat on the ground or
table versus standing the item up to assemble the parts. If any parts are missing or
damaged do not attempt assembly but contact our customer service center or return
to place of purchase with purchase receipt.
Assembly of this product may require more than one person.
1-855-HDHoliday (1-855-434-6543）
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 7.2 Watts (0.06
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections, and wires. If the product is placed
somewhere other than the ground it should be well secured, flat and stable.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse, in store display models or accidents. Questions, problems, missing parts?
Before returning to the store, call Home Accents Holiday Customer Service 8 a.m.-6
p.m., EST, Monday-Friday 1-855-HDHoliday (1-855-434-6543)
Diagram of Parts
Parts List
Locater Name Qty.
A Ear 2
B Head 1
C Neck 1
D Half of Body 2
E Leg 4
F Tail 1
G Mane 1
Hardware List
Locater Name Qty.
H Spare Fuse 2
I Spare Bulb 3
J Plastic Tie 20
K Ground Stake 4
A
B
C D
E
F
G
H
I
J
K

A
SSEMBLY
1 Assembling the Body
Align the two Halves of Body (D) with each other then insert the connecting
rods on one half into the connecting holes on the other half and fasten at
connecting loops with Plastic Ties(J).
2 Assembling the Legs and Tail to the Body
Insert the connecting rods on each Leg (E) into the matching connecting holes
on the Body (D) and fasten at the connecting loops with Plastic Ties (J).The
Legs come with metal bars attached to stabilize the Donkey. Insert the hooked
end of the metal bars into the metal nut on the opposite Leg. Insert the
connecting rods on the Tail (F) into the matching connecting holes of the back
side of the Body (D) then fasten at the connecting loops with Plastic Tie (J).
3 Assembling the Head and Neck
Insert the connecting rods on the bottom of the Neck (C) into the matching
connecting holes on the Body (D). Insert the connecting rods on the bottom
of Head (B) into the matching connecting holes at the top of the Neck (C)
and fasten at the connecting loops with Plastic Ties (J).
4 Assembling the Mane and Ears
Insert the connecting rods on the Mane (G) into the matching connecting holes
on the Head (B) and Neck (C). Insert the connecting rods on each Ear (A) into
the matching connecting holes on the Head (B).
5 Assembling the Ground Stakes
Insert Ground Stakes (K) over the metal frame of each hoof then into the
ground firmly.
D
J
E
D
F
J
C
B
D
J
G
B C
A
K